120.00EUR

Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
[KAV30.1638C]

Combo set of BLS motor with 80A ESC for model aircraft: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 rpm per V, power supply Lixx 3-4s, shaft 5 mm.

Outrunner brushless electric motor for model aeroplanes: glider 2200g, trainer 2100g, acro 1800g, 3D 1200g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2820-1150. KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
KAVAN PRO 3542-1150 is a motor for model aeroplanes up to 2200 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for faster 2000-2500 mm electric powered gliders, 1400-1500 mm high wing trainers, scale and aerobatic models.
Motor installation: KAVAN 3542-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0-5.0 mm plywood. The radial mount set is supplied with the motor.
The motor set contents: KAVAN PRO 3542-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Note: Alternative designation based on the stator dimensions: 2820-1150.
Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 1000
Internal resistance [mOhm] 16
Open-circuit current (při 10 V) [A] 2.7
Max. peak current (180 s) [A] 70
Diameter [mm] 35.2
Length [mm] 41
Length celková [mm] 63.5
Shaft diameter [mm] 5
Weight [g] 141
Poles count 14
Timing [°] 20 - 25
ESC [A] 70 - 80
Weight of glider (up-to) [g] 2200
Weight of trainer (up-to) [g] 2100
Weight of acrobat (up-to) [g] 1800
Weight of 3D (up-to) [g] 1200
Doporučená vrtule 3S: 11x8"-12x6"
4S: 9x6"-10x5.5”

under request

Reviews

Quick Find

Shopping Cart

2 x	Vest clothes Hispano Aviación
1 x	Softshell Hispano Aviación
1 x	Shirt Hispano Aviación
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector BEC male (10 pcs)
1 x	XH female balance (4S) connector (2 pcs)
2 x	Connectors banna oro 8,0 mm (M/F)
1 x	XH female balance (5S) connector (2 pcs)
2 x	Conector Servo female 4 pines
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	MPX Sub-D Adaptor
2 x	XH male balance (4S) connector (2 pcs)
2 x	Conector BEC female (10 pcs)
1 x	Connector CAN 15
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
2 x	XH male balance (2S) connector (2 pcs)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	10m servo "Premium" wire (white/red/blue)
2 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
2 x	PVC 0,08 qmm Futaba servos wire (5 m)
2 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	5 line servos wire black (1 m)
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
2 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	CC 02
1 x	Horn mando small (2 pcs)
1 x	Crimping tool
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Cap Hispano Aviación
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x	MPX Support (2 pcs)
2 x	MPX Support
1 x	Gold antispark 5,5 mm plug
1 x	Connectors MPX female
1 x	Connectors MPX black female
1 x	Mounting frame MPX male connector
1 x	MPX screwable clips (4 pcs)
1 x	Protector Connector MPX (1 pair)
1 x	MPX screwable clips (5 pcs)
1 x	Mounting frame MPX female connector
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Carbon plate 350x150x3.0 mm
1 x	Conector JR Servo male (10 pcs)
2 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	100m servo "Premium" wire (white/red/blue)
1 x	Silicone black 4,0 qmm wire (25 m)
1 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Silicone black 1,5 qmm wire ( 25 m)
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	30 cm MULTIPLEX female connector
1 x	Conector JR Servo female (50 pcs)
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
2 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Kwik link unmount tool
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x	Starter EM Gear Power 80
1 x	Handle for PERMAGRIT lime
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
2 x	Screwdriver for Torx® TX8
2 x	Starter Sullivan-STAR 603 DINATRON
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	Bag connector 2 mm
1 x	Conector FUTABA Servo female (10 pcs)
2 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Silicone black 1,0 qmm wire (100 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
2 x	Adapter 3,2 mm M6
1 x	Charger SKY RC e680
1 x	XT60 Connector with Holder Male 2pcs
1 x	Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x	Fournier RF-4D
1 x	10 mm aluminium spinner (Kavan)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Conector MT-60 (pair)
1 x	Ciano KAVAN Thin 20g
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x	Connectors MPX 8 pins (green) 1 pair (male-female)
1 x	2,0x50 mm allen screwdriver
1 x	Screwdriver for Torx® TX6
1 x	Dust collector for mould cleaning
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Nut for mounting M3 (10 pcs)
1 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Nut for mounting M4 (4 pcs)
1 x	Red 3m5 mm connector holder
1 x	MR30 connector male
1 x	XH female balance (6S) connector (2 pcs)
1 x	Red smoke canister 65 g
1 x	Green smoke canister 100 g
1 x	White smoke canister 140 g
1 x	Green smoke canister 140 g
1 x	Extractor piñones 2.3/3.2 mm
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x
1 x	Ball Link Plier
1 x	Vacuum pump P1-N
1 x	Hot Glue Stick GREEN
1 x	3,0x60 mm allen screwdriver
1 x	1,5x50 mm allen screwdriver
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Hot Glue Stick BLACK
1 x	Starter EM Gear Power 250
1 x	Vacuum pump 12 CFM
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Ball Link Plier
1 x	Copier 2x20 cm pcs
1 x	Starter Sullivan-STAR 601
1 x	Hexagonal ball head 2.0 x 50 mm
1 x
1 x	Screwdriver for Hexagon 1,27mm
1 x	Crimping tool
1 x	Z Bender - S Type Tool
1 x	2,5x60 mm allen screwdriver
1 x	Z Bender - S Type Tool
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
2 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x	2 mm Prop Adapter M5
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Regulador Jeti Jes 045
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	PowerPack 2.5X2 PRO
1 x	Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 3,2 mm M8
1 x	Adapter 4,0 mm M8
1 x	6 mm Prop Adapter M8
1 x	Allen wheel collar M3x3
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	3,2 mm Prop Adapter M5
1 x	3 mm Short Prop Adapter M5
1 x	2,3 mm Prop Drive Günther M4
1 x	4 mm Prop Adapter M6
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	2,3 mm Prop Adapter M5
1 x	Tester LiPo/LiIon/LiMn/LiFe
1 x	Universal batery Tester
1 x	Allen wheel collar M4x4
2 x	Adapter 3,0 mm M6
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Allen wheel collar M4x6

8,172.39EUR