Top » Catalog » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Quick Find

Shopping Cart

1 x	SE Ring 330 mm (4 pcs)
2 x	Tape GFK 50 mm
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
4 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 300 mm (2 pcs)
2 x	Ring 320 mm length (5 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Tape GFK 38 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 400 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	Spikes Band (5 m)
1 x	20x200 mm battery rings
1 x	Ferrita 14x8x5.5 mm
1 x	Cap Hispano Aviación
1 x	Small Crow DLE-170M
1 x	Silent-blocks DLE 170M
1 x	Motor DLE 170 M- Paramotors
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Allen wheel collar M3x5
1 x	41x5,5 mm wires output (2 pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	PCARD Wireless System
2 x	20x1000 mm Ring Strap Back To Back
1 x	Support pumb/filter Xicoy X45
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	DPSI Ampere battery backer
1 x	Combo lighting module with covering drop shape
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	1/12 Pilot "Cougar"
1 x	DPSI LR-S (with push buttons)
1 x	Fuel Dot (Black)
1 x	Black 2,4 GHz antenna exit guides (2 pcs)
1 x	160 mm carbon undercarriage (2pcs)
1 x	102 mm aluminium spinner
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	22m Fitting barb
1 x	DPSI Micro - RCS RV
1 x	DPSI RV Mini 5 (2008)
1 x	280 cc gasoline fuel tank complet
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Secraft Fuel system v2, red color
1 x	SE Ring 240 mm (2 pcs)
1 x
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Motor DLE 430 cc - Paramotors
1 x	LENTUS Multiplex Fundas alas
1 x	COPILOT Multiplex
1 x	POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	EWC6 40 cm wing connector
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Adaptador equilibrador HITEC (XH)
1 x
1 x	FunCub NG verde RR
1 x	Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x	Power MULTIlight
1 x	Spinner 42 mm EXTRA 330SC
1 x	Módulo Bluetooth
1 x	MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x	LENTUS Multiplex Landig gear retract
1 x	PROFI TX fastening rings
1 x	Arnes cruzado Confort de Luxe PROFI
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Transmitter COCKPIT SX 12 M-Link (only Tx)
1 x	Magnetic Interruptor MULTIPLEX
1 x	FUNRAY RR
1 x	Interruptor On/Off Corto micro
1 x	Servo RHINO pro SHV digi 4
1 x	HERON RR
1 x	FunCub NG azul RR
1 x	CHALLENGER Indoor
1 x	EASYGLIDER 4 RR
1 x	LENTUS Multiplex Propeller 8x6
1 x	GPS V2 Sensor for M-LINK receivers
1 x	USB Charger 12V DC for car
1 x	Extension lead 15 cm Multiplex
1 x	Resistor 3W 5% 2R2
1 x	Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x	Hose clamps 0.16-0.20in, (4 pieces)
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Aluminum Fold Prop Spinner 34 mm / 3 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
2 x	DPSI magnetic switch actuator (PCB)
1 x	82 mm aluminium spinner.
1 x	Spinner 90 mm CFK
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Tray for FUTABA 18 SZ
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Reflector 18 mm (2 pcs)
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	51 mm INO spinner (carbon imitation)
1 x	Spinner 4BL 4 blades pleg. prop 40 mm / 5,0 mm
1 x	XPower H PROP HUB Ø6.0/42.5mm 0º
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	70 mm INO spinner (carbon imitation)
1 x	102 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 4,0 mm
1 x	76 mm aluminium spinner.
1 x	Spinner 100 mm CFK
1 x	Tube mounting clips (5 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	70 mm aluminium spinner.
1 x	Connectors MPX male
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Conector XT-150 6mm (Set: 5 pares)
1 x	MR30 connector male
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Connectors MPX female
1 x	Tube bender
1 x	VPP system propeller for AXI VPP motors (spare)
1 x	Two-function control switch + button by FUTABA

13,441.36EUR