119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Quick Find

Shopping Cart

1 x	DPS Switch JR/JR
1 x	4 LiPo XH>EH adapter
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	CM-3
1 x	BEC 3A FOXY
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	CC 02
1 x	3 LiPo XH>EH adapter
1 x	CC 05
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (female)
1 x	Connector Sub-D 2+5 Female
1 x	5 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	Connector CAN 15
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CC 03
1 x	Double conector with JR adapter and 200 mm extension
1 x	UBEC 6A KAVAN
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Cabel charger transmitter GRAUPNER
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Jeti Black cap
1 x	Ventus 1:4 set of instruments
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
3 x	Cable Cargador FUTABA
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
2 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	200m servo "Premium" wire (white/red/blue)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	50m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
2 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
2 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
2 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Oracover Green10 m
1 x	XH female balance (5S) connector (2 pcs)
1 x	Smoke set "S"
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	SUS wire 3m (nylon coated)
1 x	Connector Sub-D 2+5 Male
2 x	Silicone red 0,25 mm² wire (25 m)
1 x	DPSI OCP Overload protection
1 x	Combo lighting module with covering drop shape
1 x	DPSI LR-S (with push buttons)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Dust collector for mould cleaning
1 x
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Combustible Glow "KAVAN" air/heli 5% nitro
1 x	Hot Glue Stick GREEN
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Xplorer3 anemometro
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Xplorer4 anemometro
1 x	Digital precision scale up to 2000 g
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Hot Glue Stick RED
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	Aluminium servo arm (2 uds)
1 x	Gracia (Top Model)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Ferrita 14x8x5.5 mm
1 x	Fournier RF-4D
1 x	DINO Glider ARC
1 x	Canopy Astra
1 x	White silicone 0,25 qmm wire (100 m)
1 x	BABY glider (Aero-naut)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Electric spoiler 185 mm (2 pcs)
1 x	X-RAY Micro QR (Tail Tube)
1 x	BABY glider drawings (Aero-naut)
2 x	1 m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Release wax 250ml
1 x	Painting GHT Lexan Black 150 ml
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	IKARUS plane
1 x	Universal Colour Paste deep black 50 g
1 x	Spray Graphit 33
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Rudder 2_Tray 3.5~4 inch
1 x	FOAM - CURE™ (24g)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Thread locker IC-Loc™ blue "medium" 10 ml
1 x	Cyano INSTA - FLEX+™ (25g)

5,538.01EUR