119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Long pinned hinge (12 uds)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Large flex hinge (12 uds)
2 x Fast'n EZ-CA-Hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x Flap hinge (6 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Gates hinge
3 x 15 mm reinforced hinge
2 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x 18 mm reinforced hinge
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Long pinned hinge (6 uds)
2 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Gates hinge aluminium (1 pcs)
2 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x Nylon hinge for flaps 33x9 (2 pcs)
3 x Ventus 1:4 set of instruments
1 x Motor A2212/13T
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Oratex Yellow Cub 10 m
1 x ABS tube 2.0x1.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x DYMOND VTX UBS Programming adapter
1 x Paramotor Trike XL
1 x Paramotor BackPack XXS (without accessories)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 4 mm (M/F)
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
2 x Small pinned hinge (12 uds)
2 x Small pinned hinge (6 uds)
1 x Hardener Aero EPH 161 (500 g)
1 x Hardener Aero EPH 161 (250 g)
1 x Small flex hinge (12 uds)
1 x Indoor hinge with servo arm integraded
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Threaded insert M5 (10 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Hexagonal Nut M1 (10 pcs)
1 x Hexagonal Nut M2.5 (10 pcs)
1 x Nut for mounting M2 (4 pcs)
1 x Threaded insert M4 (4 pcs)
1 x Hexagonal Nut M4 (10 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Blind nut M5 (4 pcs)
1 x Small aluminium horn gold (2pcs)
1 x Blind nut M2 (10 pcs)
1 x Threaded insert M6 (10 pcs)
1 x Nut for mounting M3 (10 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Hexagonal Nut M2 (10 pcs)
1 x Blind nut M8 (10 pcs)
1 x Blind nut M4 (10 pcs)
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Propeller APC 10x6 Electric Pusher
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 12x3.8 SF
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x EWC3 40 cm wing connector
1 x Magnetic Connect locking system
1 x COPILOT Multiplex
1 x Futaba R3006SB T-FHSS 2.4GHz
1 x Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS
1 x Receiver R7008SB FASSTest
1 x Receptor FUTABA R7003SB FASST
1 x Receiver FUTABA R7108SB FASSTest/FASST
1 x Receptor FUTABA R7208SB FASSTest SBus2
1 x DUPLEX 2.4 EX MVario2
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x Propeller APC 11x10 Electric
1 x Propeller APC 11x4.7 SF Pusher
1 x Propeller APC 11x8 Electric
1 x Propeller APC 10x4.7
1 x Propeller APC 10x7 SF
1 x DPS Switch JR/JR
1 x DPSI LR-S (with push buttons)
1 x EWC3 100 cm wing connector
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x PowerFuel RX V2 Fuel Pump
1 x Filter Capacitor JR
1 x Transmitter COCKPIT SX 12 M-Link (only Tx)
1 x DPSI RV Mini 6 Magic
1 x DPSI RV Mini 5 Magic
1 x EWC6 40 cm wing connector
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x DPSI RV Mini 6 (2008)
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x DPSI RV Mini 5 (2008)
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x PWC4 wing/fuselage connector for 4 servos
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x Wing connector 8pin with pin strip, plug & socket
1 x DPSI 2001 RV
1 x DPSI Ampere & Voltage bundle
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Propeller 8x4 Electric
1 x Propeller 8x4,3 SlowFlyer
1 x Cooler motor type 400
1 x Propeller 3x2
1 x Reductora IPS dual-motor 10,7:1 with spinner
1 x Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x Propeller 11x4,7 SlowFlyer
1 x Cooler motor type 300
1 x Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x Propeller 10x4,7 SlowFlyer
1 x Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Arnes cruzado Confort de Luxe PROFI
1 x Interruptor On/Off Corto micro
1 x Potenciometro micro
1 x Support hands Issuer PROFI TX
1 x Antena FUTABA R7108/7014/7114SB (1 pc)
1 x 
1 x R6106 HF 2,4 GHz receiver
1 x Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x Receptor FUTABA R7006SB FASSTest/FASST
1 x Receiver FUTABA R6004 FF FAST
1 x Ant. Cable R606/17/08/14FS L:1500mm
2 x Sensor DUPLEX 2.4EX MUI 200
1 x DUPLEX 2.4EX MT 300 EX
1 x MT 125 temperature sensor
1 x DUPLEX 2,4GHz MRPM EX
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x Charger FUTABA SQN30W12P-08 220v
1 x TX-Tray V1 (L) (Black)
1 x Servo BMS-4112
1 x Futaba Aero Large Case - Internal Foam
1 x Switch Cap L (Red)
1 x Futaba Radio Case
1 x Servo BLUE Bird BLS-H71B v2
1 x Servo BLS-M55B 61.2kg
1 x DPSI Ampere battery backer
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x Pitot tube JETI MSpeed DUPLEX
9,904.76EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies