20.00EUR

EWC6 40 cm wing connector
[EMCA85085]

EWC6 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock	Pan Head Screw M2x8 PH countersunk head temporarily out of stock	Nut for mounting M2 (4 pcs) temporarily out of stock
Protective Cover for wires Ø 3 mm 1000 mm temporarily out of stock

Quick Find

Shopping Cart

1 x	Double conector with JR adapter and 200 mm extension
1 x	CC 03
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Connector Sub-D 2+5 Female
1 x	30 cm BEC cable (male)
2 x	2 LiPo XH>EH adapter
2 x	CM-3
2 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	Connector CAN 15
1 x	CC 05
1 x	5 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	BEC 3A FOXY
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Dean "T" - Futaba Adapter
1 x	3 LiPo XH>EH adapter
1 x	4 LiPo XH>EH adapter
2 x	DPS Switch JR/JR
2 x	Connector Sub-D 2+5 Male
1 x	Oracover White 2 m
1 x	Oracover Yellow CUB 10 m
1 x	Ply-Span 450x600/13g Red
3 x	MYLAR film A350 (1000x500 mm)
2 x	Ply-Span 450x600/13g Orange
1 x	ORACOVER Ferrari red (2 m)
2 x	Oracover CARBON Metalic 1 m
1 x	Oracover Green10 m
1 x	Ply-Span 450x600/13g Black
1 x	Oratex Antik 2m
1 x	ORACOVER Fluor red (2 m)
1 x	Oracover CHROME 2m
1 x	Oracover Azul Cielo 2 m
1 x	PROFICOVER 5m
1 x	Oracover ROYAL RED 2m
1 x	Oracover Black 2 m
1 x	Adapter lead MPX/EC3
1 x	Cabel charger transmitter GRAUPNER
1 x	Circlick securite
1 x	DPSI Ampere battery backer
1 x	Cabling for Fox MDM1 wings
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Extension MPX-MPX 20 cm
1 x	Protective Cover for wires Ø 6 mm 1000 mm
2 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cable set PREMIUM, fuselage/wing
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
2 x	Black silicone 0,25 mm² wire (25 m)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension silicon 100 cm (Futaba)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	5 mm M2 variable horn
2 x	Horn 6/20 with M3 Bearing
1 x	6 mm M3 variable horn
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension 15 cm (Futaba)
1 x	Extra long horn 60x30
2 x	Control horn long w/ball
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Optical RPM Sensor
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Extension lead 15 cm Multiplex
1 x	Horn mando long (2 pcs)
1 x	Extension silicon 50 cm (Futaba)
2 x	Extension silicon 30 cm female (Futaba)
1 x	DYNAMOMETER S-1580
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension 7.5 cm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Horn F3A de Titanium 16 mm (2 units)
2 x	Brass control horn M2 long for wire (10pcs)
1 x	Cabel "Y" 15 cm
2 x	5 mm M2 variable inclined horn
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 75 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Adjustable brass horn threaded M3
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Fixed launching hook
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	SBEC Jeti
3 x	TP/TopFuel - XH 2/3S Adapter
1 x	SPARK Switch 7.4v
1 x	UBEC 6A KAVAN
1 x	USBCOM 5i
1 x	Heat sink for Optotronix LEDs
1 x	DPSI RV Mini 6 Magic
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	Filter Capacitor JR
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	37 mm PVC transparent battery termo-retract (1 m)
2 x	Oracover Brown 2 m
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	SBEC 40
1 x	Opto Gas Engine Kill Switch
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	PowerBox SparkSwitch RS
1 x	Oracover GREY Seafire Sea 2m
1 x	USB interface ALTIS
1 x	Ply-Span 450x600/13g Yellow
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	MAX BEC 2D plus EX
1 x	Short Switch On/Off micro
1 x	Oratex Natural White 20m
1 x	PSC 6
1 x	Oratex White 2m
1 x	Oracover Orange 2 m
1 x	SPARK Switch 5.9v
1 x	Switc electronic 30 Amp
1 x	Opto Gas Engine Kill Switch
1 x	Oratex Natural White 2m
1 x	USB HLS prog. interface
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Male connector for 12 pines AWG
1 x	Electronic switch JETI SP06 Opto
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	EWC6 40 cm wing connector
1 x	Extension 2/3 lipos JST - JST/C
1 x	EWC3 40 cm wing connector
1 x	Extension 5 lipos JST/C - JST
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Extension 5 lipos JST - JST/C
1 x	CC 11 Conector
1 x	8 mm Adapter for AXI53xx
1 x	Frontal Adapter for AXI53xx
1 x	Stickers-digit for marking
1 x	EWC3 100 cm wing connector
1 x	Extension 6 lipos XH > EH
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	SkyMaxx 1.550 mm (kit)
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	MAX BEC
1 x	Long adjustable control horn with bearing
1 x	Premium servo extension 100cm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	Sparkplug 1/4-32 Glow
1 x	Sparkplug ROSSI R8
1 x	DLE Ignition unit
1 x	Gasket electric Fuel Pump
1 x	Bujia OS G5 gasolina
1 x	RCEXL Electronic ignition twin CM-6
1 x	Dumper propeller 6/8 mm
1 x	4 mm Prop Adapter M8
1 x	6 mm Prop Adapter M8
1 x	2 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	La Capitania di Venetia accesories
1 x	3,2 mm Prop Adapter M8
1 x	Aero-Master Cabine (Aero-naut)
1 x	3 mm Prop Adapter M6
1 x	Aero-Master (Aero-naut)
1 x	2,3 mm Prop Adapter M6
1 x	Stick coupler Ms 15 mm
1 x	SCHARNHORST Battleship 1:200
1 x	5 mm Prop Adapter M8
1 x	4 mm Prop Adapter CN-Spinner
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x	MPX housing with flange (4 pcs)
1 x	MPX PCB "6 Pins", 5 pieces
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	Propeller MENZ-S 15x6
1 x	POLARON EX 800w charger

9,051.14EUR