119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Actuator Electric 25 mm
3 x 160 mm carbon undercarriage (2pcs)
1 x White aluminium 230 mm landing gear
2 x Xplorer4 anemometro
3 x Xplorer3 anemometro
1 x Extension 30 cm (Futaba)
2 x 200 mm extensión servo HITEC/JR
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
3 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Extension 90 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x Premium servo extension 50cm
1 x Extension lead 15 cm Multiplex
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension 100 cm (Futaba)
3 x Extension silicon 30 cm female (Futaba)
1 x Cable S.BUS 3 salidas 300 mm
2 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Prolongador S-Bus JR/JR 20cm
1 x Circlick securite
2 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Futaba male 40 cm extension
2 x Extension silicon 35 cm male (Futaba)
1 x Extension silicon 100 cm (Graupner)
2 x Extension silicon 30 cm male (Graupner)
2 x Extension silicon 100 cm (Futaba)
1 x Premium servo extension 75cm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Premium servo extension 100cm
1 x Smoke set "S"
2 x 
1 x Starter Sullivan-STAR 601
1 x Profile ABS Square 1 x 1000 mm
3 x Metal ring front FEMA
1 x Carbon fiber rod 1.0 mm x 1000 mm
2 x Extension silicon 25 cm (Graupner)
1 x Fiberglass landing gear for 140-160
2 x Support pumb/filter Xicoy X45
1 x Nose leg 155 mm with wheels 70 mm
1 x Angle support XT60 conector
1 x Actuator Electric 25 mm HIGH TORQUE
1 x Hacker X-Pro USB interface V2
1 x ProgBOX MASTER Hacker
1 x JetiBOX
1 x PRO-HV Dual Action Valve
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
2 x Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x AC-10 pre-rotacion with motor
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x Baseplate servo
2 x Electric starter suitable for the DLE111, DLE120 and DLE85.
2 x Aluminum Bayonet / strongal D35 mm / 1 m
2 x Starter 12v (Max 180 and 30ccm)
2 x Ball Link Plier
1 x Jeti Advance Pro Program Card
2 x Extension 15 cm (Futaba)
1 x Extension silicon 75 cm (Graupner)
2 x Extension PVC 150 cm (Graupner)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x KingTech Turbineoil 5L
1 x Turbine KingTech K30G Restart
1 x Battery LiFe -3000/25C-3S 9.9V
1 x Turbina KINGTECH K70G4
1 x EWC3 40 cm wing connector
1 x PowerFuel RX V2 Fuel Pump
1 x Wing connector 8pin with pin strip, plug & socket
1 x Magnetic Connect locking system
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Scale exhaust K45TP
1 x Turbina KINGTECH K120 G4
1 x KingTech Turbineoil 10L
1 x Turbina XICOY X95 compact
1 x Turbina KINGTECH K55G4
1 x Telemetria XYCOY adapter
1 x Turbine KINGTECH K100 G4
1 x Turbina XICOY X180 compact
1 x Filter KingTech
1 x FOD Screen K140G/K180G/K210G
1 x DPSI OCP Overload protection
1 x DPSI RV Mini 5 (2008)
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Bungee HLG Premium
1 x Fuselage BULL MØ1 2.600mm
1 x Set freno para ruedas Dia. 127 mm
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x 170x54 mm SLH KOVO wheel with bearing and metal hub
1 x Xplorer2 anemometro
1 x 22m Fitting barb
1 x 1/10 Pilot "Jimmy"
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Oil FUCHS 1 liter
1 x 1/6 Pilot "Buddy"
1 x 1/6 Pilot "Garry"
1 x 1/4 Pilot "Heidi"
1 x Ant. Cable R606/17/08/14FS L:1500mm
1 x Futaba Neckstrap
1 x Emisora FUTABA T18 SZ + R7208SB
1 x Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Tapa estado carga XT-60 (6 pcs)
1 x BULL MØ1 2.600mm BLUE
1 x ULTIMATUM 2.0 m green/black
1 x BULL MØ1 2.600mm "AeroPANDA"
1 x BULL MØ1 2.600mm (mono color)
1 x BULL MØ1 2.600mm "McLAREN-GULF"
1 x BULL MØ1 2.600mm "ALPINE"
1 x Vest clothes Hispano Aviación
1 x Bags de Luxe ULTIMATUM 2.0
1 x Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x Canopy BULL MØ1 2.600mm
1 x Ventus 1:4 set of instruments
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x 30 cm BEC cable (female)
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Axle wheel with accesories
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Dust collector for mould cleaning
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x 18m Fitting barb
1 x Z Bender - S Type Tool
1 x 280 cc gasoline fuel tank complet
1 x Hot Glue Stick BLACK
1 x Ball link Aluminio M3 (2 pcs)
1 x Oils Pumps Empty (1 liter)
1 x Aluminium servo arm (2 uds)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x 20x200 mm battery rings
1 x 20 mm carbon horn
1 x Support Antena 2.4 Ghz (2 pcs)
1 x 1/12 Pilot "Fighter"
1 x 1/12 Pilot "Langley"
1 x Hot Glue Stick GREEN
1 x Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x "Taxi Tank" Fuel Tank
1 x 10 mm gas motor standoff
1 x 1/6 Pilot "Tony"
1 x Xplorer1 anemometro
1 x 
1 x 1/10 Pilot "Jack"
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
2 x 120x60 mm SLH KOVO wheel
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x 25 mm carbon servo arm
1 x 1000 cc gasoline fuel tank complet
1 x Aceite DELUXE turbine Jet Oil 1 litro
1 x Starter 12v (Max 90 and 15ccm)
1 x Hot Glue Stick RED
1 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "John"
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x 102 mm INO spinner (carbon imitation)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x 110x55 mm C SLH KOVO wheel
1 x Soporte grifo FESTO (2 pcs)
2 x Cabel "Y" 30 cm (Futaba)
2 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 10 cm (Graupner)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension silicon 50 cm (Futaba)
1 x Cap Hispano Aviación
1 x Turbina XICOY X180 light
53,471.15EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies