186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x DLE 55 carburetor
1 x FESTO connector M5 Quick 6 mm
1 x 500 ccm gasoline fuel tank
1 x 500 ccm complete gasoline fuel tank
1 x 1000 ccm gasoline fuel tank
1 x T- Fittings blue color (2pcs)
1 x FESTO connector M7 barb fitting 6mm
1 x 1000 ccm complete gasoline fuel tank
1 x FESTO connector M7 barb fitting 4mm
1 x Quick hose connector 6-4 mm
1 x FESTO connector 1/8 Quick 6mm 90º
1 x Pilatus PC-21 2100 mm RED/WHITE (SebArt)
1 x Pilatus PC-21 50E, GLOW set conversion (SebArt)
1 x Pilatus PC-21 50E, Electric L.G (SebArt)
1 x Suncover 100cc Red
1 x 20x1000 mm Ring Strap Back To Back
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 250 mm (2 pcs)
1 x Head spacer
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 350 mm (2 pcs)
1 x GLOW 9C + accesories
1 x Frontal support Speed 600
1 x TYGON tubo 1 m Diam. 3.4 x 2.0 mm
1 x Motor XPOWER F2919/10 F5J Light
1 x Motor XPower F2915/12 XLight
1 x Compact on-board starting system (9713)
1 x Central support Speed 600
1 x Motor mount for 1 m models
1 x A50 Motor Mount Alu complete set
1 x Starter EM Gear Power 250
1 x Motor mount for 1200 mm models
1 x Motor holder for AC 28/7
1 x Fan for A60
1 x Hacker A30-S Radial Set
1 x METEOR 1.000 mm kit
1 x Size "M" motor holder for class 600
1 x Compact on-board starting system (9512)
1 x Starter EM Gear Power 80
1 x Frontal support Speed 280
1 x Size "L" motor holder for class 600
1 x Aluminium ignition bad (blue)
2,918.12EUR
Manufacturers
Languages
Español English
Currencies