186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ferrita 27x14x7 mm
2 x Ferrita 17x10x6.5 mm
3 x Ferrita 14x8x5.5 mm
2 x Big-Malibu XL Roof box with surfboard rack GREY
2 x Ferrita con funda
1 x Wing OXY 0,5 pulgadas2
1 x Para-RC Trike "RC-Bullix"
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Windsock Ozone L - 700 mm
1 x Circlick securite
1 x Premium servo extension 50cm
2 x 200 mm extensión servo HITEC/JR
1 x Cable S.BUS 3 salidas 300 mm
2 x Extension PVC 150 cm (Graupner)
1 x Cabel "Y" 30 cm (Futaba)
3 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
4 x Extension lead 15 cm Multiplex
2 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension 30 cm (Futaba)
2 x Premium servo extension 75cm
1 x Truck-trailer for gliders 720 x 239 mm
2 x Propeller balancer
1 x Angle measurer
1 x Truck-trailer for gliders 720 x 285 mm
1 x Propeller balancer
1 x Surface Indicator Gauge Small
2 x Socket head ball link M3 (2 uds)
2 x Socket head long ball link M3 (6 uds)
1 x Ball link M2 (10 pcs)
1 x Ball link M1.6 (6 uds)
1 x Blue metalic ball link M3/3 azul (2 pcs)
2 x Joint with bearing M2,5 22x5,5
1 x Ball link M3 RPA's-UAV's
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x M3 Maxi ball link (2 uds)
2 x Joint with bearing M2 22x5,5
1 x Short ball link M3 (6 uds)
3 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Ball link M3 (6 uds)
2 x Ball link M3 (10 pcs)
2 x 6 mm hexagonal ball link M3 (10 pcs)
2 x Long ball link M2 (6 uds)
1 x Socket head ball link M3 (2 uds)
2 x Long ball link M3 (6 uds)
3 x USB Mini Camera endoscope
1 x M3 Maxi ball link (2 uds)
2 x M2,5 5Diam short black ball link V2 (2 pcs)
2 x 800TVL CMOS camera for FPV
1 x M2,5 5Diam metal ball link V3 (2 pcs)
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x M2,5 5Diam black ball link V2 (2 pcs)
1 x 6 mm ball link M3 (10 pcs)
3 x M3 Maxi ball link (2 uds)
1 x Profile ABS Square 1 x 1000 mm
1 x Screwdriver for Hexagon 1,27mm
1 x Hot Glue Stick GREEN
1 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x Miniature brass strap hinge, 1 m
1 x 3,2 mm Prop Adapter M5
1 x Central piece 52 mm - 5º
1 x 2,3 mm Prop Drive Günther M4
1 x Central piece 3Bl 47 mm 0º
1 x Spinner Alumin. propeller pleg. 40 mm / 5,0 mm
1 x Spinner propeller pleg. 40 mm / 3,0 mm
1 x Allen wheel collar M4x4
1 x 3 mm Short Prop Adapter M5
1 x White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
1 x 42 mm central piece for 4 blades
1 x Spare white 38-45 mm spinner
2 x 
1 x Spinner propeller pleg. 40 mm / 5,0 mm
1 x Central piece 72 mm 0º
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x 10 mm dogdrive props
1 x Spinner Alumin. propeller pleg. 30 mm / 3,0 mm
1 x Spare white 38-45 mm spinner
1 x Adapter 3,0 mm M8
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Spare spinner 40/42 mm 3-Bl
1 x Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x 5 mm Prop Adapter M6
2 x 12 mm dogdrive props
1 x Short ball link M2 (6 uds)
1 x 8Wx2 Navigation & Strobe, 11mm Red/White
2 x Extension silicon 30 cm male (Futaba)
2 x Premium servo extension 25cm
1 x Extension silicon 50 cm (Futaba)
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Cable S.BUS 3 salidas 100 mm
1 x Extension silicon 25 cm (Graupner)
1 x Extension 7.5 cm
1 x Extension silicon 30 cm female (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension silicon 75 cm (Futaba)
1 x Ventus 1:4 set of instruments
1 x Extension silicon 10 cm (Futaba)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x Field folding model stand SebArt
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x WingFix ULTRA Black Edition
2 x Short ball link M1.6 (6 uds)
2 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x 200m servo "Premium" wire (white/red/blue)
2 x OLED-Display for PowerBox Mercury SRS
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
2 x PowerBox Smokepump JETs 2x outside
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 30 cm MULTIPLEX female connector
2 x Extension for SensorSwitch 60cm
2 x Adapter lead MPX/XT60
2 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Dean "T" - Futaba Adapter
1 x Conector JR Servo male (50 pcs)
2 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x 12V Car Adapter
1 x 10m servo "Premium" wire (white/red/blue)
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Crimping tool
1 x Extension MPX-MPX 20 cm
1 x Cable set Premium™ MAXI "one4two"
1 x 100m servo "Premium" wire (white/red/blue)
1 x Smoke Oil Blue 5 l
1 x Adapter lead MPX/EC3
1 x 1 m servo "Premium" wire (white/red/blue)
1 x BlueCom™ Adapter (Android / WP)
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Conector JR Servo female (50 pcs)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Circlik for shaft 1.5 mm (10 pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Tapping Screw M2.9x9.5 (10 pcs)
1 x Micro control horn (2 pcs)
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x M3/5Diam metal ball link V3 (2 pcs)
1 x PT 21x13 EL Propeller
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Flat washer 3.2 mm (20 pcs)
1 x Pan Head Screw M2x8 PH
1 x Pulley brass 4/1,5 (2 pcs)
1 x PT 16x10 E Propeller
1 x Screw M2x6 (10 pcs)
1 x Brass control horn M2 large for wire (2pcs)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn mando long (2 pcs)
1 x Screw M2x8 (10 pcs)
1 x Lock washer 3.2 mm (20 pcs)
1 x 20x13 Falcon electric carbon prop (64g)
1 x Brass control horn M4 short for wire (4 pcs)
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x NF-3X-80 liner Kit
1 x PSC 5
1 x Cabel "Y" 30 cm (graupner)
1 x Ball link M2,5 (10 pcs)
1 x Propeller MASTER 6x3,5
1 x Socket head long ball link M3 (2 uds)
1 x Propeller POWER-PROP 15x10
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x NF-3XL set
1 x Extension silicon 50 cm (Graupner)
1 x Starter Sullivan-STAR 601
1 x FIALA Propeller 24x10
1 x Propeller MASTER AIRSCREW 13x6
1 x Propeller MASTER 7x3
1 x Propeller MASTER 6x3
1 x Propeller POWER-PROP 11x8
1 x Propeller POWER-PROP 12x8
1 x Vess propeller 13x6 S
1 x Long ball link M1.6 (6 uds)
1 x Propeller POWER-PROP 16x8
1 x 8x6 tree blades propeller
1 x Propeller MASTER 7x4
1 x Receiver CORE PBR-26D 26ch
1 x Mounting frame MPX female connector
1 x PowerBUS Splitter
1 x Premium servo extension 100cm
1 x Slider Extenion for CORE
1 x DJI FPV Combo
1 x TS832 to Gopro AV/Power Cable
1 x Conector JR Servo male (10 pcs)
1 x PowerBUS Lead 200 cm
1 x Extension for LC-Display 50cm
1 x BlueCom™ Adapter (iOS)
1 x 5 line servos wire black (1 m)
1 x MPX-Dean "T" Adapter
1 x PowerBox Teleconverter S-BUS 2
1 x Bateria DJI Mini 2 2250 mAh
1 x Propeller set 400 (2R+2L)
1 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x DJI Mavic Air Fly More Combo
11,841.21EUR
Manufacturers
Languages
Español English
Currencies