1 x | PIX Hawk with accesories |
1 x | PPM Encoder Module |
2 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Wheel FEMA 140 mm / 6 mm |
1 x | Wheel 18 mm |
3 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | Foam wheel Ø 351 mm (2 pcs) |
2 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
2 x | Wheel FEMA 70 mm / 5 mm |
2 x | Wheel FEMA 100 mm / 6 mm |
2 x | Wheel 28 mm |
3 x | Wheel 22 mm |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
2 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
2 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
3 x | Wheel FEMA 152 mm / 8 mm |
2 x | Wheel 38 mm V2 |
2 x | Wheel FEMA 178 mm / 8 mm |
1 x | Super Light Wheels (Sponge Tyre) Ø 60mm x 19 mm (2pcs) axis Ø 3. |
2 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | 18 mm reinforced hinge |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Horn 5/20 with M2 Bearing |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Cable control set |
2 x | RH long aluminium horn (2pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Horn with ball 55x40 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Small aluminium horn red (2pcs) |
2 x | Horn 6/35 with M3 Bearing |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Horn with ball 40x30 |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Partall paste 650 g |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | CM-3 |
1 x | Servo MKS HV747 |
1 x | 44.5x17 mm (1.75") Type jets aluminium core wheel |
4 x | 120x60 mm SLH KOVO wheel |
2 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | SAVOX SH 0254 servo |
1 x | SERVO DES 588 BB MG |
1 x | Wheel Ø 75 mm (1 ud) Electron Retracts |
1 x | Servoarm Aluminium SH-82 |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Servo FUTABA S 3071 HV S-Bus |
1 x | SERVO DES 806 Pignons |
2 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
2 x | Servo FUTABA BLS172 SV |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
3 x | 65 mm mini servo cover |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Servo GO-1053 MG 20.0kg |
2 x | Superlight deluxe wheel 40 mm (2 pcs) |
3 x | Vertical mounting servo holder |
3 x | Mini wheels (3 pcs) |
1 x | Wheels 270mm (2 pcs) |
2 x | 17 mm servo arm with ball link DES Graupner |
1 x | HITEC DPC-11 programmer |
2 x | Parachute PV6 for F3J |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Nose wheel 62 mm |
1 x | Indoor hinge with servo arm integraded |
1 x | Large flex hinge (12 uds) |
1 x | Horn mando long (2 pcs) |
1 x | Micro control horn (2 pcs) |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Horn mando small (2 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Long horn 50x26 |
1 x | Short adjustable control horn 3x24 |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | SPS 70V 100/200 A |
1 x | Multi-adapter balancer JST - TP |
1 x | Extension 5 lipos JST/C - JST |
1 x | 5 mm M2 variable inclined horn |
1 x | Horn DUBRO 1/2A |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | Superlight deluxe wheel 56 mm (2 pcs) |
1 x | Jet wheels 65 mm E-brake 4 mm shaft |
2 x | Superlight deluxe wheel 75 mm (2 pcs) |
2 x | Superlight deluxe wheel 45 mm (2 pcs) |
2 x | NoNa BB wheel Ø200x60mm in pair |
1 x | Servo FUTABA BLS 272SV |
1 x | Futaba 3010 - Gear Set |
1 x | PU aircraft tyre, 45x16x3 mm |
1 x | Lightweight aircraft wheel, 45x18.5x2 |
2 x | Horizontal mounting servo holder |
2 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
2 x | Hitec 25 mm servo arm with M3 ball link |
2 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Futaba 30 mm servo rounded arm |
2 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | 40 mm gas motor standoff |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | Antenna Hole Cap V1 (Silver) |
2 x | NoNa BB wheel Ø175x55mm in pair |
1 x | 20 mm gas motor standoff |
1 x | Wheel Scale 1/4 Vintage 178 mm / 7" (1 par) |
2 x | Wheels 220mm (2 pcs) |
1 x | Superlight deluxe wheel 68 mm (2 pcs) |
1 x | Servo TOPMODEL DS9010 T |
2 x | Wheel ø180 mm AIRTOP Ballon pneumatic |
1 x | 90x60 mm standart servo cover |
1 x | Plastic wheels 36 mm (2 pcs) |
2 x | DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC) |
3 x | Wheel Scale 1/3 Vintage 240 mm / 9.33" (1 par) |
2 x | 13 mm wing servo holder |
1 x | 57 mm micro-mini servo cover |
2 x | Super light ∅45x9 mm axi ∅3 mm metalic core wheel |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
1 x | 50x45 mm micro-mini servo cover |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Servo FUTABA S 9670 SV |
1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
1 x | Plastic wheels 28 mm (2 pcs) |
1 x | Servo FUTABA BLS 276SV |
2 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Rubber wheel Ø 50mm x 18mm (2pcs) axis Ø 2.6mm |
1 x | Rubber wheel Ø 58mm x 21mm (2pcs) axis Ø 2.6mm |
1 x | Servo FUTABA BLS175 SV |
1 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Plastic wheels 30 mm (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Servo FUTABA SBL 471 SV |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | Rubber wheel Ø 38mm x 13mm (2pcs) axis Ø 2.1mm |
1 x | Futaba BLS152 - Upper Case |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Lightweight aircraft wheel, 55x18.5x3 |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Rubber wheel Ø 45mm x 16mm (2pcs) axis Ø 2.1m |
1 x | Futaba 38 mm servo arm |
3 x | Servo HITEC HS-125 MG |
2 x | Adapter rotula M3 |
2 x | Futaba 52 mm servo arm |
2 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
2 x | Hitec 46 mm servo arm with ball link |
1 x | Hitec 20 mm servo arm |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Hitec 38 mm servo arm with ball link |
2 x | Hitec 25 mm servo arm with ball link |
2 x | Futaba 46 mm servo arm with ball link |
1 x | Futaba 2x20 mm servo double arm |
2 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
2 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
2 x | Futaba 38 mm servo arm with ball link |
2 x | Hitec 38 mm servo arm |
2 x | FUTABA 20 mm servo arm with ball link |
1 x | Aluminium battery holder red |
1 x | Superlight deluxe wheel 62 mm (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | 11 mm wing servo holder |
1 x | 90x45 mm hard foam KOVO wheel |
2 x | ACTIVE ARF Electric 1.995 mm |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | 10 mm floating pad (72 pcs) |
2 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Aluminium ignition bad (blue) |
2 x | Astra wing Joinner (Top Model) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | 25 mm gas motor standoff |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Canopy Astra |
2 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 5 mm gas motor standoff |
1 x | NoNa BB wheel Ø125x35mm in pair |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Optical RPM Sensor |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Interruptor SPS 70v 60/120A |
1 x | Adaptadores carga 6s JST-XH |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Bearing block for noseleg landing gear |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | Small pinned hinge (12 uds) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Robart Door Hinge (Pk2) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Adjustable brass horn threaded M3 |
1 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Servo SAVOX SA-1258 TG |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Ventus 2cx 4.5 m |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | Angle measurer |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
1 x | Towing hook |
1 x | Red aluminium servo arm V2-Futaba 2,0 inch |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Angle of incidence meter |
1 x | Bidule 55 V3 2460 mm |
1 x | 58 mm micro servo cover |
1 x | ARTIST 1.560 mm |
1 x | Superlight standard wheel 100 mm (2 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | Cabling for Fox MDM1 wings |
1 x | Towing hook |
1 x | GRAFAS MAXI ARF |
1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
1 x | Oracover White 2 m |
1 x | KABRIOLIN 3D Electric 1.4m |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Fascination 3600 mm ARC |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | ExtraCA Top |
1 x | Ventus 2cx 4.5 m Canopy |
1 x | Bidule 111 3000 mm |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Albatros red/white (Top Model) |
1 x | 7 mm gas motor standoff |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Superlight wheel 100 mm with valve (2 pcs) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | Futaba 20 mm servo arm |
1 x | Hitec 30 mm servo rounded arm |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | HITEC 20 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
|
16,163.28EUR |