1 x | Angle of incidence meter |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Propeller balancer |
1 x | Propeller balancer |
1 x | Angle measurer |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Field folding model stand |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | ABS tube 7.0x6.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
4 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | USB Mini Camera endoscope |
1 x | Shirt Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Cap Hispano Aviación |
2 x | XH female balance (3S) connector (2 pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Field folding model stand SebArt |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Conector BEC male (10 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Conector Servo female 4 pines |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | Horns set HS-65HB/MG, 5065MG |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | 25 mm carbon servo arm |
1 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo FUTABA BLS175 SV |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | CORTEX |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | Switch Cap M (blue) |
1 x | 4 mm Prop Adapter M6 |
1 x | FesEx-Uni6 System |
1 x | Propeller APC 10x4.7 |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | Frontal Adapter for AXI53xx |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
2 x | Servo FUTABA BLS173 SV |
2 x | Servo FUTABA SBL 471 SV |
1 x | Programador FUTABA USB CIU-3 |
2 x | Servo FUTABA S 9670 SV |
2 x | Futaba S9650/9670SV - Upper Case |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Fiberglass motor-holder for electric motors |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | 800TVL CMOS camera for FPV |
1 x | Bags de Luxe ULTIMATUM 2.0 |
1 x | Wing Joiner ULTIMATUM 2.0 m |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | Canopy BULL MØ1 2.600mm |
1 x | ULTIMATUM 2.0 m orange/blue |
1 x | Propeller APC 13x4 Electric |
1 x | Propeller POWER-PROP 13x9 |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | FesEx-Uni8 System |
1 x | Propeller electric carbon 10.5x6 |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 14x10 Electric |
1 x | Propeller APC 10x3,8 SF |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Servo arms set HS-65HB/MG/5065MG |
1 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Wheel keeper washer |
1 x | Cooler motor type 300 |
1 x | Motor mount for 1 m models |
1 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Central support Speed 600 |
1 x | Motor Mount for Multiplex FunJet |
1 x | KIRA 480-34 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Servos security connector (2 pcs) |
1 x | Universal Prop Saver |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | PYRO 650-53L EJE LARGO |
|
9,177.26EUR |