Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Ventus 1:4 set of instruments
3 x	Tow hook for tug
1 x	Towing hook
1 x	Towing hook
1 x	Adjustable launching hook
1 x	Towing hook <3m
1 x
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Horn 6/20 with M3 Bearing
1 x	Brass control horn M4 short for wire (10pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn 6/35 with M3 Bearing
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Horn 5/15 with M2 Bearing
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	SlowFlyer control horn (3 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Small aluminium horn blue (2pcs)
1 x	6 mm aluminium horn with patella
1 x	Horn 13,5x16 mm (2 pcs)
2 x	Horn with ball 40x30
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Extractor piñones 2.3/3.2 mm
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Glases Aspen
1 x	White smoke bombs AX-9 (10 pcs)
1 x	White smoke canister 140 g
1 x	Landing gear strap medium (4 uds)
1 x	Nylon gear block Ø 3 mm (2 uds)
1 x	Actuator Electric 25 mm HIGH TORQUE
1 x	Landing gear clamp for Ø 4 mm (4 uds)
1 x	40 mm air cylinder
2 x	Nylon gear block Ø 6 mm (2 uds)
1 x	Quick hose connector 3-3 mm
2 x	Legs + electric brakes for Viper Jet 90
1 x	Set freno para ruedas Dia. 127 mm
1 x	Universal batery Tester
1 x	LiPo Storage Box Type "P"
2 x	DYNAMOMETER S-1580
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	PowerBox Evo
1 x	PowerBox PIONEER incl. microSwitch
1 x	OLED-Display for PowerBox Mercury SRS
1 x	PowerBox MagSensor red connector
1 x	External LED's (2 pcs)
1 x	POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x	PowerBox Competition
1 x	BlueCom™ Adapter (iOS)
1 x	Battlife Guard 2s
1 x	PowerBox OLED display
1 x	PowerBox iGyro SRS
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Horn 5/10 with M2 Bearing
1 x	Horn 6/27 with M3 Bearing
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Extra long horn 60x30
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Lite Plywood panel 600x300x2.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Mini neumatic retract 3 mm landing gear (Het-rc)
1 x	Spinner NUT M10x1
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Adjustable brass horn threaded M3
1 x	5 mm M2 variable inclined horn
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Motor OS 3820-1200 electric
1 x	Cable control set
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Lock nut M5 (20 pcs)
1 x	Y-Hose connector 6-6-6 mm
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	Quick hose connector 4-4 mm
1 x	Y-Hose connector 4mm
1 x	Propeller POWER-PROP 14x9 Izda
1 x	Propeller POWER-PROP 14x9
1 x	Propeller electric carbon 6.5x4
1 x	Bearing block for noseleg landing gear
1 x
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	BULLIT Wing 1095 mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Racor 3/3 mm
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Servo arm with 4 mm hole to FEMA 9810A
1 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Racor "Y" 3 mm
1 x	Quick hose connector 6-6 mm
1 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Nylon threaded block M4 (2 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Racor 2/3 mm
1 x	T-Hose connector 4-4-4mm
1 x	Y-Hose connector 2-2-2 mm
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Racor 4/4 mm
1 x	Tap FESTO 4-4 mm
1 x	T-Hose connector 6-6-6 mm
1 x	Indoor landing gear set
1 x	Propeller POWER-PROP 13x9
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Propeller POWER-PROP 11x8
1 x	Propeller electric carbon 10x7
1 x	White aluminium 230 mm landing gear
1 x	Propeller electric carbon 7x7
1 x	Propeller POWER-PROP 10x6
1 x	160 mm carbon undercarriage (2pcs)
1 x	Fiberglass landing gear for 140-160
1 x	120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x	Propeller electric carbon 10.5x8
1 x	Skies 2x 335 mm + 1x Esqui 250mm
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Albatros ,spare cockpit (Top Model)
1 x	13 mm wing servo holder
1 x	Albatros red/white (Top Model)
1 x	Albatros ,spare fuselage (Top Model)
1 x	Bidule 111 3000 mm Canopy
1 x	Bidule 170 ARF 3.48 m
1 x	Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 4S 14,8V 40C (Gens Ace Hard Case)
1 x	Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line
1 x	BlueCom™ Adapter (Android / WP)
1 x	Balsa panel 2.5x100x1000 mm
1 x	Motor Mega AC 16/25/02
1 x	Motor Mega AC 16/15/03
1 x	Motor A30-12 L V4
1 x	Landing gear retract neumatic (Jet Legend)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Birch plywood plate 600x300x2.5 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Batería LiPo GENS 5000 mAh 5S 18.5V 60C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace)
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	2 piece mounting frame
1 x	MicroMatch PowerBox
1 x	PowerBox Signal Amplifier

10,241.22EUR