2,500.00EUR

Motor DLE 200cc Std
[ROIDLE200STD]


This engine is not toy. For your own safety, please read the manual carefully before operation. DLE is not responsible for all injuries result from the use.
Thank you for purchasing the DLE engine. DLE200 is a opposed cylinder 2-stroke engine designed for paramotor and UAV. It has unique feature with light weight, long life, high power and low vibration. The design of DLE200 does not use the tuned pipe by routine. It improves the engine's power limit and extends the life of the engine with excellent throttle respond and curve. DLE200, with its new design, will offer you unexpected flight experience.
This engine is not a toy! Therefore, all users who are not specifically skilled or trained to perform the operation or flight should stop the dangerous action and be performed following the help of the experienced.
Misuse or inaccurate maintenance may result in damage of engine, injury or death. Installation, trial run and maintain of the engine must be carried out by experienced. DLE will not be liable for any damage or death caused by misuse or inaccurate maintenance.
This is not a certified aircraft engine. User assumes all risk of use and acknowledges by his use that he knows the engine is subject to sudden stoppage. DLE will not be liable for any damage or death caused through the sudden stoppage in the air.
This engine does not have product liability insurance. We cannot assure the nonoccurrence of the engine failure. Using the engine can be dangerous and accidents can result in serious property loss, injuries or death! Never start the engine if you don't want to take the risks.

Type 2 stroke
Bore 55mm
Stroke 42mm
Displacement 200CC Power ( Premium Muffler ) 23HP/8000rpm
( Standard Muffler ) 20HP/7500rpm
Compression Ratio 10:1
Reduction ratio 1:2.7
Transmission Type Belt
Starting Type Electrical Start
Net Weight (without muffler) 10.3 Kg
Standard Muffler Weight 1.1 Kg
Premium Muffler Weight 2.2 Kg
Spark Plug DLE-8A
Petrol 93# 、97#
Alternator Output 14V 1A
Premium Alternator Output 14V 4A
Propeller 1220mm Applicable Pilot Weight (Premium Muffler) 120Kg
Applicable Pilot Weight (Standard Muffler) 80Kg



Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cyano INSTA - CURE™ (225g)
1 x Cyano ULTRA - CURE™ (21g)
1 x Cyano SUPER - GOLD™ Pocket (18g)
1 x Cyano INSTA - CURE™ (56g)
1 x Thread locker IC-Loc™ blue "medium" 10 ml
1 x Debonder UN - CURE™ (30g)
1 x Cyano SUPER - GOLD™ (12g)
1 x Catalyst INSTA - SET™ (60g)
1 x Cyano INSTA - CURE™ (12g)
1 x Thread locker IC-Loc™ red "high" 10 ml
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x Epoxy MID-CURE™ 15 min (130g)
1 x ExtraCA Top
2 x FOAM - CURE™ (24g)
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Cyano SUPER - GOLD™ THIN (12g)
1 x UHU hart 35 g
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Pegamento Pu R 50g polyuretano
1 x M3 INDUSTRIAL ball link (2 uds)
2 x M2 5Diam black ball link V2 (2 pcs)
1 x Long ball link M2 (6 uds)
1 x Strip 1,5x1,5x330 mm
2 x Short ball link M2 (6 uds)
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Round Rod 6,0x1000 mm
2 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Ball link M3 (6 uds)
1 x Joint with bearing M3 22x5,5
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
2 x Ball link M3 (10 pcs)
2 x Round Rod 3,0x1000 mm
1 x M3 Maxi ball link (2 uds)
1 x Strip ABS 2.0x5.0x1000 mm
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
3 x M3 Maxi ball link (2 uds)
1 x Strip 3,5x1,75x330 mm
3 x M2,5 Diam metal ball link V3 (2 pcs)
2 x Joint with bearing M2 22x5,5
1 x Socket head long ball link M3 (6 uds)
1 x Motor DLE 200cc Std
1 x Big Crow DLE-170M
1 x 
1 x Hovercraft sailcloth
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Extinguisher CO2 - 2 Kg
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Yellow smoke canister 65 g
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Oracover Yellow CADMIO 10 m
1 x Ferrita con funda
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Round Rod 1,25x1000 mm
2 x M2 5Diam short black ball link V2 (2 pcs)
1 x Ball link M1.6 (6 uds)
1 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Ball link M3 (10 pcs, flat ball)
3 x Joint with bearing M2,5 22x5,5
2 x M3/5Diam metal ball link V3 (2 pcs)
2 x Socket head long ball link M3 (2 uds)
2 x Ball link M3 RPA's-UAV's
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Socket head ball link M3 (2 uds)
2 x Ball link M2 (10 pcs)
2 x M2,5 5Diam black ball link V2 (2 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
2 x M3 Maxi ball link (2 uds)
1 x M3/5 Diam metal short ball link V3 (2 pcs)
2 x Ciano KAVAN Medium 20g
1 x Debonder CA 20g
2 x KAVAN Threadlocker - Blue 10ml
2 x Spinner fixed propeller 60 mm / 5,0 mm
2 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Propeller APC 11x5.5 Electric Pusher
1 x PT 20x13 EL Propeller
1 x Propeller APC 14x12 Electric
1 x Propeller APC 12x8 SF
1 x Propeller APC 10x5 Electric Pusher
1 x Propeller APC 11x4.5 Electric Pusher
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Servo HITEC HS-5245 MG Digi
1 x Servo HITEC HS-53
1 x Servo HITEC HS-125 MG
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Socket head ball link M3 (2 uds)
1 x Long ball link M1.6 (6 uds)
1 x Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x Battery LiPo GENS 450 mAh 2S 7.4V 25C (Gens Ace)
1 x Battery LiPo GENS 4000 mAh 6S 22.2v 25C (Gens Ace)
1 x Microbalon filler for CA glues. Packaging bottle 20g
1 x Ciano KAVAN Super Thin 20g
1 x Servo HITEC D-955 TW Titanium
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Servo HITEC HS-45 HB
1 x Receptor MINIMA 6S HITEC
1 x Servo HITEC D131 MW nano
1 x Servo case HS-225MG/225BB/5245MG
1 x Servo HITEC HS-225 MG
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Servo HITEC D941 TW
1 x Electric spoiler 440 mm (2 pcs)
1 x Aero-Master Cabine (Aero-naut)
1 x Albatros ,spare fuselage (Top Model)
1 x Aero-Master (Aero-naut)
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x Mini VISION "spread tow" CFK
1 x Aero-Master Fuselage (Aero-naut)
1 x IMPULSE 2 F3F
1 x FUNRAY RR
1 x ASK 21 6.8m
1 x ASK 21 6.5m + pylona
1 x Chili F3K 2 wing servo mounted
1 x Lunak ARF 2000 mm Yellow (Hacker Model)
1 x Glider IKARUS
1 x Fascination 3600 mm (Top Model)
1 x Set stickers JEEMO "Andy"
1 x TAKEO 3.6m electric
1 x Electric spoiler 250 mm (2 pcs)
1 x Fox 4000 mm Airworld,canopy frame
1 x Fox MDM 1 6000 mm
1 x Fox 4000 mm (Airwold)
1 x Fox MDM 1 4000 mm DeLuxe,cabina
1 x ASH 31 Mi Scale:1/3 - 7m, elevator
1 x DG-303 ACRO 3750 mm, winglets
1 x Lock washer 2.7 mm (20 pcs)
1 x Fournier RF-4D
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x X-RAY Micro QR (Rudder)
1 x Mini DART 2 F3K carbon light 1m Green
1 x X-RAY Micro QR (Tail Tube)
1 x Chili Race F3K (aramid nose)
1 x X-RAY Micro QR (Elevator)
1 x Fascination 3600 mm ARC
1 x BABY glider drawings (Aero-naut)
1 x E-FUN BUG (ROI-Import)
1 x IKURA 4.0 m
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x Swift ARF 2000 mm Red (Hacker Model)
1 x HERON RR
1 x Avia spare blue cockpit (Top Model)
1 x Glider Ka 7 Red (2540mm)
1 x Electric spoiler 185 mm (2 pcs)
1 x Glider PIROL
1 x DINO Glider ARC
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x ASG 32 560 mm
1 x EASYGLIDER 4 RR
1 x DELPHIN Race 3.6m c64
1 x ENIGMA ARF
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Canopy Sweet / Siesta
1 x FOX 3000 mm, Fuselage (FMS)
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x BABY glider (Aero-naut)
1 x Canopy Astra
29,743.98EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies