57.90EUR 39.90EUR

Glases Nimbus
[CMNIMBUS]



Set de gafas, cristales y trapo

Funda (inclu�da) para guardar todo
The Nimbus polarised set represents our top-of-the-range frame. Nimbus sunglasses have been specifically designed and manufactured for radio controlled modellers, with interchangeable lenses for different light conditions - with the Category 0 yellow lenses fitted, you can even enjoy the benefits of light enhancement on a cloudy day.

Polarised sunglasses greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

Other manufacturers of interchangeables rarely offer polarised lenses as standard - they certainly don't give you TWO sets for your money! For that reason, we believe our Nimbus glasses are some of the best value sports sunglasses on the market for ANY sport.

Featuring 100% UVA / UVB protection, these polycarbonate glasses benefit from an especially high-quality, wrap-around frame design that blocks unwanted and annoying light and wind from the sides. The scratch-resistant lenses are de-centred, which negates the possibility of distortion caused by the lens curvature. Conforming to US ANSI Z80.3 and British and European safety standard EN1836, our sunglasses are subjected to a drop-test at the factory, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the renowned European Union 'CE' compliance mark.

The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2), polarised, average sunlight; (category 3) polarised, bright sunlight; dark smoked (category 4), very bright conditions.

All glasses come with 4 x sets of lenses as standard, a cleaning cloth and a carry case with belt clip and internal compartments for housing the extra lenses. Our latest stock also includes a neck / head strap.


enought units
enought units

Reviews

Customers who bought this product also purchased
Connectors banna oro 2 mm (M/F)
Connectors banna oro 2 mm (M/F)

enought units
enought units

Metal clevis M2 (10 uds)
Metal clevis M2 (10 uds)

enought units
enought units

Servo HITEC HS-55
Servo HITEC HS-55

enought units
enought units

Blind nut M5 (4 pcs)
Blind nut M5 (4 pcs)

enought units
enought units

Threaded coupler M2 (10 uds)
Threaded coupler M2 (10 uds)

enought units
enought units

Short ball link M2 (6 uds)
Short ball link M2 (6 uds)

enought units
enought units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Threaded coupler M2 (10 uds)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Optical RPM Sensor
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x DYNAMOMETER S-1580
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Strip ABS 2.0x10.0x1000 mm
2 x Round Rod 1,25x1000 mm
2 x Round Rod 2,5x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
3 x Strip 1,5x1,5x330 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
2 x Profile ABS Square 1 x 1000 mm
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 
2 x Landing gear axle Ø 4 mm (2 uds)
1 x Tap FESTO 6-6 mm
2 x Wheel collar 2 mm Ø (4 uds)
2 x Y-Hose connector 4mm
2 x Landing gear strap medium (4 uds)
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Turnbuckle M1,6x17/27 (2pcs)
1 x Blades 330mm
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Round Rod 1.0x3.5 cm
1 x Cable coupler M2x66 (2 uds)
1 x Cable coupler M2 (10 uds)
1 x Pulley brass 4/1,5 (2 pcs)
1 x Turnbuckle M3 33x49 (2pcs)
1 x Cable coupler M2 (10 uds)
2 x Jeemo Dolly
1 x XICOY X45 rail
2 x Fuselage Bags JEEMO
1 x Set stickers JEEMO "Andy"
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
3 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x Profile ABS half cane 6.0x1000 mm
2 x U Profile ABS 3,0x6,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
2 x L-Connector 4.0 mm x 1000 mm
2 x ABS angle 6,0x6,0x1000 mm
1 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x IMPULSE 2 F3F
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x Canopy Astra
1 x Surprise XII Rudder (Freudenthaler)
1 x Glidder Mü13e (Bergfalke)
1 x Glider PIROL
1 x ABS Strip 1.5x3.0x1000 mm
2 x Strip 3,5x1,75x330 mm
1 x Strip 2,5x1,25x330 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x GLOW 9C + accesories
2 x Trailing leg 131 mm
1 x Air pressure gauge
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
2 x Profile ABS half cane 2.0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Landing gear clamp for Ø 3 mm (4 uds)
1 x RCEXL Electronic ignition twin CM-6
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Nylon gear block Ø 6 mm (2 uds)
2 x Recess mount-rem. glow plug set
1 x Nylon gear block Ø 4 mm (2 uds)
2 x GLOW 5C + accesories
1 x GLOW 2C + accesories
1 x Ignition bed V2 Red color
1 x Wheel collar 4 mm Ø (4 uds)
1 x Starter EM Gear Power 80
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x Compact on-board starting system (9512)
1 x Y-Hose connector 2-2-2 mm
2 x RCEXL Electronic ignition twin A-02
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Electromotor starter EME 35cc
1 x Landing gear clamp for Ø 2 mm (4 uds)
1 x T-Hose connector 3-3-3 mm
1 x Landing gear strap large (4 uds)
2 x DLE Ignition unit
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Aluminium ignition bad (blue)
2 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Polyurethan FESTO hose 3x0,5 mm, transparent
1 x Body for landing gear Ø 4 mm
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Nylon threaded block M6 (2 uds)
1 x T-Hose connector 2-2-2 mm
1 x Body for landing gear Ø 3 mm
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Wheel collar 5 mm Ø (4 uds)
1 x Racor "Y" 3 mm
1 x Nylon gear block Ø 3 mm (2 uds)
1 x 40 mm air cylinder
1 x Hose connector stopper 4 mm
2 x Landing gear retract neumatic (Jet Legend)
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
2 x PRO-HV Dual Action Valve
1 x Mini neumatic retract landing gear
1 x Metal ring front FEMA
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Suncover 100cc Red
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x 82 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x F3A carbon 85 mm spinner for AXI
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Falcon Carbon Spinner 82mm for electric motor
1 x 63 mm INO spinner (carbon imitation)
1 x 75 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x 102 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Foreman, scale 1:32
1 x Receiver replacement antenna, approx. 15
1 x Distanzstück motor OS 120 AX
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x POLARON EX 800w charger
1 x ASPIRE Red ARF 2.000 mm
1 x Tank + hopper Kevlar ASPIRE 6 L Kero
1 x Bags wings/rudder ODYSSEY
1 x Multiplex True Air Speed + Vario Sensor to M-LINK
1 x MULTIPLEX ALUMINUM CASE "M-LINK"
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x Flat Connector 4.0 mm x 1000 mm
1 x 11 mm Rubber pads (14 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x ASPIRE Red ARF 2.000 mm, Set Alas
1 x F9F COUGAR Red ARF 1.562 mm
1 x Arnes cruzado Confort de Luxe PROFI
1 x Adaptador equilibrador HITEC (XH)
1 x Interruptor On/Off Corto micro
1 x GPS V2 Sensor for M-LINK receivers
1 x Profile ABS Square 4 x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x U Profile ABS 5,0x10,0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
2 x Straightened threaded rod M2-1m
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Check valve quick hose connector 4-4 mm
1 x Angled clevis with threaded rod M3
1 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x Profile ABS half cane 3x1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Tailwheel for 40/90 size
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Manometer 4 mm
1 x Hose stopper 4 mm
1 x Aluminium ignition bad (red)
1 x Compact on-board starting system (9715)
1 x Festo 4mm Tubing Holder (10 uds)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x Festo Adaptor Tygon Large/4mm
13,617.04EUR
Manufacturers
Languages
Español English
Currencies