Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]


DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
VSpeak Modulo Glasses JETI
VSpeak Modulo Glasses JETI
151.25EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x SE Ring 240 mm (2 pcs)
2 x 20x200 mm battery rings
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x Tape GFK 38 mm
1 x Tape GFK 25 mm
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
2 x Marker ties (20 pcs)
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x1000 mm Ring Strap Back To Back
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Tape GFK 50 mm
1 x SE Ring 360 mm (2 pcs)
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x Profile ABS half cane 2.5x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
3 x Pilot "Anthony" (Slimline)
2 x L-Connector 4.0 mm x 1000 mm
1 x Piloto Jet "Red" 1/6 Scale
2 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "Cindy"
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x 1/6 Pilot "Garry"
1 x ABS angle 2,0x2,0x1000 mm
1 x 1/4 Pilot "Heidi"
2 x Profile ABS Square 4 x 1000 mm
1 x Pilot "Adolf" Legends Series (Slimline)
3 x ABS "T" angle 8.0x8.0x1000 mm
1 x Pilot "Dick" Legends Series (Slimline)
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Flat Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x Pilot "Duke" Legends Series (Slimline)
2 x ABS angle 3,0x3,0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Profile ABS Square 2 x 1000 mm
1 x Pilot "Goose" (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x 1/7 Pilot "Japanese"
1 x 1/12 Pilot "Langley"
2 x 1/12 Pilot "Cougar"
4 x Civilian pilot "G-Man" size 9cm (Slimline)
3 x Extinguisher CO2 - 2 Kg
1 x Connectors banna oro 8,0 mm (M/F)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Smoke set "S"
1 x 2,0x50 mm allen screwdriver
1 x Support conector MPX (6 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x 
2 x DPSI V-Match
2 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
3 x ABS angle 1.5x1.5x1000 mm
1 x Rubber profile 6-2 mm 2M
1 x Rubber profile 10-2 mm 2M
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Profile ABS half cane 8.0x1000 mm
1 x Profile ABS half cane 4x1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
1 x 1/10 Pilot "Jack"
2 x 1/6 Pilot "John"
2 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Piloto JET 1:3,5
2 x Profile ABS half cane 4x2.5x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 5.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Set montaje amortiguador para modelos 8-16 Kg
1 x Tren de cola carbono 50-70cc
2 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Tailwheel for 1-3 kg models
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
2 x Tail wheel for 8-12 kg models
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x VAGABOND 1500 mm ARF V2 (Blue)
2 x XT-90 connector (pair)
1 x MPX Support (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
2 x Soldering PCBs 8pin, 5 pieces
1 x MPX PCB "4 Pins", 5 pieces
2 x Soporte carbono MR30 (2 pcs)
1 x VAGABOND 1500 mm ARF V2 (Red)
1 x Swift ARF 2000 mm Red (Hacker Model)
1 x Combo lighting module with covering drop shape
2 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x EWC3 40 cm wing connector
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x BALSA triangular 15x15x1000 mm
1 x DPSI OCP Overload protection
1 x 14 mm Portholes for screws (10 pcs)
1 x 3,2 mm Prop Adapter M6
1 x 3.17 mm Prop Adapter CN-Spinner
1 x GPS, Vario and altitude Sensor SBS-01G
1 x 25 mm fenders (10 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Switch magnet for gas cap and magnet switch actuators
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Optotronix X-Carrier
1 x DPSI Micro MPS
1 x Emcotec SPS Magnetic Switch Actuator
1 x DPSI LR-S (with push buttons)
2 x DPSI RV Mini 5 (2008)
1 x Servo-V-Limiter 5.2V
1 x DPSI Ampere & Voltage bundle
1 x DPSI Micro - RCS
1 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x OPTOTRONIX Aurora LCU
1 x DPSI Micro - RCS RV
1 x DPS Switch JR/JR
1 x DPSI RV Mini 6 Magic
2 x DPSI magnetic switch actuator (PCB)
1 x DUPLEX 2.4EX Central Box 220
2 x GPS Logger Dymond
1 x 290 mm M4/4 mm Prop shaft
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x 16x10 tree blades propeller Master Airscrew
1 x 12 mm mast holder
2 x 3 mm Prop Adapter M6
2 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x 12 mm portholes (10 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x 3 mm Leader (L 100 mm)
1 x Sun Cover PC 21 XXL (JMB Jets)
2 x 2,3 mm Prop Adapter M6
2 x 15x7 tree blades propeller
1 x 12x8 tree blades propeller
1 x 10x7 tree blades propeller
1 x 290 mm 8x4 M4 shaft ship
1 x Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x PropCover 16-20" (2 pcs)
1 x GPS Expander Module
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS half cane 2.0x1000 mm
1 x POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Fueling valve "Air"
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Servo Connector Brackets (10 pcs)
1 x XT-30 connector (pair)
1 x XH female balance (6S) connector (2 pcs)
1 x XH female balance (2S) connector (2 pcs)
1 x XH female balance (8S) connector (2 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x Ferrita 14x8x5.5 mm
1 x T-Motor U7-V2.0 Kv420
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Metal ring front FEMA
1 x PowerBox DigiSwitch V2 JR/JR
1 x Mobile Terminal
1 x OLED-Display for PowerBox Mercury SRS
1 x PowerBox Signal Amplifier
1 x Wing connector 8pin with pin strip, plug & socket
1 x Wing conexion 2 servos Futaba 50 cm
1 x XH male balance (8S) connector (2 pcs)
1 x XT-60 connector (female)
1 x XH female balance (3S) connector (2 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x XH LiPo extension lead
1 x Ferrita 17x10x6.5 mm
1 x Ferrita 27x14x7 mm
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x 8 mm Adapter for AXI53xx
1 x AXI Cooler 22xx
1 x La Capitania di Venetia accesories
2 x AXI 2820/8 V2 Long
1 x Frontal support Speed 280
1 x Size "L" motor holder for class 600
2 x AXI 2820/14 V2 Long
2 x AXI 2808/20 V2
1 x AXI 2217/20 V2 Long "F5J"
1 x A30-M/L/XL Backmountset complete
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x Motor A50-12 L V4
1 x Propeller MENZ-S 21x12
1 x Propeller MENZ-S 19x8
1 x 11x7 tree blades propeller
1 x 36 mm black plastic spinner for fixed propeller
1 x Propeller FALCON 5-BL 24x23.5
1 x 31,0 mm propeller (rigth propeller)
1 x Anchor 25 mm (2 uds)
1 x FALCON 24X9 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 20x6
1 x ABS 500 x 400 x 1,5 mm (white)
1 x FALCON 24X12 CARBON PROPELLER (GAS)
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x 3.2 mm Prop Adapter M8
1 x Propeller MEJLIK 23x8 CFK
1 x Propeller MEJLIK 22x10
1 x Aeronaut Baumbeschlag (Ms) 10 mm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Prop Holder AXI 41xx V2
1 x 3,2 mm Prop Adapter M8
1 x 5 mm Prop Adapter CN-Spinner
1 x AXI 2808/20 V2 Long
1 x KIRA 480-43
1 x Axle for AXI 2808/xx motors
1 x KIRA 600-22 6,7:1
1 x Motor A30-12 L V4
1 x A50 Backmountset complete
1 x FALCON 24X10 CARBON PROPELLER (GAS)
1 x Propeller APC 11x7 Glow/Gas
1 x Spinner 3BL propeller pleg. 42 mm / 4,0 mm
1 x 10 mm portholes (10 pcs)
1 x Antiaircraft gun 3.7 cm (5 pcs)
1 x 50 mm black plastic spinner for fixed propeller
1 x Propeller MEJLIK 26x12 N-3 Blades
1 x Propeller MENZ-S 18x8
1 x Propeller MENZ-S 20x10 3 blades
1 x 300x4 mm M4 shaft ship
1 x Actrocon 30A ESC
1 x Propeller MENZ-S 19x12
1 x 15x7 tree blades propeller LEFT
1 x 42 mm black plastic spinner for fixed propeller
1 x FALCON 25X9 CARBON PROPELLER (GAS)
1 x Propeller MENZ-S 18x10 3-Blades
1 x Spinner 3BL propeller pleg. 40 mm / 4,0 mm
1 x Propeller APC 16x10 Glow/Gas
1 x FALCON 33X11W CARBON PROPELLER (GAS)
1 x AXI Cooler 41xx
1 x Radial Mount Set for AXI2814 and AXI2820 V2
1 x Universal Prop Saver
1 x 2.3 mm Adapter for 30 mm spinners
1 x Prop Shaft Adapter 8 mm/M12 "long"
1 x 4 mm Prop Adapter M6
1 x 2 mm Prop Adapter M6
1 x 6 mm Prop Adapter M8
1 x MG cannon 1.8 cm (5 pcs)
1 x Dumper propeller 6/8 mm
1 x Stick coupler Ms 15 mm
1 x SCHARNHORST accessories
1 x 4 mm Prop Adapter M8
1 x FesEx-Uni6 System
1 x KIRA 480-31 5,2:1
1 x AXI 2212/26 V2
1 x AXI 2814/10 V2 Long
1 x AXI 2212/20 V2
1 x Axle for AXI 2820/xx motors
1 x AXI 2814/12 V2 Long
1 x Hacker A30-S Radial Set
1 x Motor Mount for Multiplex FunJet
1 x KIRA 600-17
1 x PYRO 600-11
1 x AXI 2814/10 V2
1 x Axle for AXI 5325/xx motors
1 x Motor ORBIT 20-12 with coolingfan
1 x Axi for MVVS 3.5 Sport
1 x KIRA 480-34
1 x Cooler motor type 150
1 x PYRO 650-103 Long Axi
1 x AXI 2217/12 V2
1 x AXI 2814/20 V2
1 x AXI 2820/10 V2
1 x Central support Speed 280
1 x PYRO 900-52L
1 x PYRO 650-53L EJE LARGO
1 x VM 2020/20 rear
1 x PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x Radial heatsink for MPJ AC25/35-xx motor
1 x Axle for AXI 2208/xx motors
1 x AXI 2826/12 V2
2 x AXI 2808/24 V2 Long
1 x Motor Advance 50-6
1 x AXI 2820/12 V2 Long
1 x Cables suitable for the motor AC 28/7
1 x Ø 40 mm fiberglass motor-holder for electric motors
1 x Motor A50-16 S V4
1 x Axle for motor A20-S (3 uds)
1 x Axle for motor A50-L
1 x Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x Motor PERMAX BL-O 3520-920 (Extra 330 SC)
1 x Motor A20-20 L EVO
1 x Motor A40-14 L 14-Pole V4
17,715.78EUR
Manufacturers
Manufacturer Info
Emcotec
- Emcotec Homepage
- Other products
Notifications
NotificationsNotify me of updates to DPSI Ampere & Voltage bundle
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce