575.00EUR

F9F Panther (Aero-naut)
[AE136000]



Modelo de F9F
Panther

Detalle del cockpit
del F9F

Esquema de la construcci�n

Ubicaci�n de la turbina
Even though it may not be immediately obvious, the F9F Panther ranks as one of the classic old-timer jets. The machine was designed by Grumman in the period after 1945, as the company’s first jet aircraft. As such, the Panther was following in the footsteps of Grumman’s other famous felines, such as the Hellcat and Bearcat. The F9F completed its first flight in November 1947, and first saw active service in the Korean War, where it was employed primarily in the ground combat role. At that time its opponent was the MiG 15 - the classic from the Soviet camp. Since the Panther could operate from ships as well as land bases, it was flown both by the US Navy and the Marines. The Panther F9F has many characteristic features, including a round fuselage cross-section, graceful, flowing lines, unswept wings, and tip tanks of elegant shape.

The model
The F9F’s fuselage is lithe and cat-like, but at the same time capacious, making it an excellent choice for the installation of an electric ducted fan (EDF) power system. The obvious type is a 90 mm impeller, not least because such a wide choice of units is available, and the model’s air ducts are already prepared for this impeller diameter. Fitted with a suitable motor, the model offers an above-average flight performance with such a system, but it is also possible to install an even larger ducted fan unit (up to approx. 110 mm Ø) at the builder’s discretion.

Features:
- Components produced from CNC-machined moulds for super-accurate parts fit
- Maximum pre-fabrication
- all-GRP construction
- Air ducts factory-installed
- Pigmented surfaces of the highest quality
- Optimum airframe strength combined with minimum weight - Ample space for the receiving system and batteries (> 20 sub-C cells max.)
- The option of retro-fitting a slightly larger power system
- Docile flying characteristics despite the high performance
- RC-Functions: Elevator, Ailerons, Motor control.


Reviews

Customers who bought this product also purchased
Canopy F9F Panther (Aero-naut)
Canopy F9F Panther (Aero-naut)

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Cable coupler M2 (10 uds)
1 x Black large kwik link (10 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Kwik link with arm M5xM2,5xL30
1 x Couple M4 for wire (10 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Cable coupler M3 (10 uds)
1 x Cable coupler M2,5 (2 pcs)
1 x Cable coupler M2x66 (2 uds)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Brass ball links BS M3 V1 (10 pcs)
1 x 4 mm M3 red control terminal (4 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Cable coupler M3 (10 uds)
1 x M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x Angled clevis with threaded rod M3
1 x Metal ball clevis M3 (10 uds)
1 x XH male balance (5S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x Connectors banna oro 3 mm (M/F)
1 x XH male balance (4S) connector (2 pcs)
1 x Conector BEC male (10 pcs)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Connectors DEANS (T)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x XH female balance (5S) connector (2 pcs)
1 x Conector BEC female (10 pcs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x 30 cm DEANS female connector
1 x Gold antispark 5,5 mm plug
1 x Connectors banna oro 3,5 mm (M/F)
2 x Connector CAN 15
2 x XH male balance (3S) connector (2 pcs)
1 x Gold antispark 4 mm plug
1 x Connectors banna oro 6,0 mm (M/F)
2 x XH female balance (3S) connector (2 pcs)
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Optotronix Aurora Plug
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x XH female balance (2S) connector (2 pcs)
1 x ABS Strip 1.5x4.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
2 x Strip 2,0x2,0x330 mm
2 x ABS Strip 1.5x8.0x1000 mm
2 x Round Rod 5,0x1000 mm
1 x Strip 3,5x1,75x330 mm
2 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 6,0x1000 mm
3 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Round Rod 1,25x1000 mm
2 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 1,0x1000 mm
2 x Strip ABS 2.0x5.0x1000 mm
2 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x 6 mm aluminium horn with patella
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cable with accesories
1 x Flap hinge 33x9 mm (6 pcs)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Small aluminium horn red (2pcs)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Interface Jack Adapter IKARUS
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Kwik link with arm M3xM2xL24
1 x Conector JR Servo female (50 pcs)
1 x 30 cm MULTIPLEX female connector
1 x Soporte carbono MR30 (2 pcs)
1 x Kontronik connector (10 connectors, 5 pairs)
1 x XT60 Connector with Holder Male 2pcs
1 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
2 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors MPX male (PIN double)
1 x XH female balance (9S) connector (2 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x XH male balance (6S) connector (2 pcs)
1 x Conector JR Servo female (10 pcs)
1 x XH female balance (7S) connector (2 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Protector Connector Dean-T (1 pair)
1 x XT-30 connector (pair)
1 x Wing connector 8pin with pin strip, plug & socket
2 x ABS I Strip 10x5x1000 mm
1 x Head lower part New
1 x Screws flush mount M2
1 x LA500 rotor head shaft
1 x Rotorhead pushrod
1 x LA500 rotor head core
1 x Blade holder center
1 x LA500 nose
1 x Nut M1,6
1 x Mudguard for 140/165 mm wheels
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Wheel collar 5 mm Ø (4 uds)
2 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x XH male balance (2S) connector (2 pcs)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Fox 4000 mm (Airwold)
1 x Fox 4000 mm Airworld,cabina
1 x FOX MDM-1 3.500 mm ARF White
1 x LUNAK 4,00 m
1 x Fox 4000 mm Airworld,canopy frame
1 x DG-303 ACRO 3750 mm, winglets
1 x Fox MDM-1 ARF 3.5m Orange
1 x Round Rod 4,0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x ABS I Strip 20x10x1000 mm
1 x Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x Fox MDM 1 4000 mm DeLuxe,cabina
2 x Fuselage Bags JEEMO
2 x Round Rod 1,5x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x PPS-4D Propeller
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x Jet Pipe for ULTIMATUM 2m
1 x Servo DITEX TD2612S
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x Boomerang SPRINT V2 Red/Yellow
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x Head spacer
1 x Propeller RF CFK 13x7
1 x Propeller CFK 16x17
1 x PU aircraft tyre, 45x16x3 mm
1 x Black smoke bombs AX-60 (5 pcs)
1 x Red smoke canister 65 g
1 x BETA 1400 RTF Red
1 x Yellow smoke canister 100 g
1 x White smoke canister 140 g
1 x SHK 4000 mm Scale 1:4.25
1 x Cable video GoPro and 5V cable
1 x Blades 330mm
1 x Tail support (2 pcs)
1 x Blade holder lower
1 x Propeller 10x4,7 SlowFlyer
1 x Baering 3x8x4
1 x Blade holder upper
1 x Screws M1,6x6 Allen
1 x Wheel collar 4 mm Ø (4 uds)
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Propeller RF CFK 16x8,5 S
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Propeller CFK 16x16 Slim
1 x Propeller CFK 17x13
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x Propeller CFK 18x9
1 x AX-60 starters (5 pcs)
1 x Round Rod 2,5x1000 mm
1 x White smoke bombs AX-60 (5 pcs)
1 x SAVAGE Max Red 1080 mm
1 x Red smoke canister 140 g
1 x Yellow smoke canister 65 g
1 x Yellow smoke canister 140 g
1 x ASG 32 560 mm
1 x White smoke canister 100 g
1 x EDGE 540 V3 (Superlite) ORANGE
1 x Green smoke canister 65 g
1 x Green smoke canister 100 g
1 x REVOLTO Blue
1 x White smoke canister 65 g
1 x Propeller CFK 23x12
1 x Set of buckles and strap, 1:4 scale.
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x Spinner propeller pleg. 30 mm / 3,2 mm
1 x BULL MØ1 2.600mm BLUE
1 x Spinner propeller pleg. 28 mm/5,0 mm
18,018.18EUR
Manufacturers
Manufacturer Info
Aero-naut Homepage
Other products
Languages
Español English
Currencies