Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Premium servo extension 100cm
1 x	Extension 100 cm (Futaba)
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Extension silicon 100 cm (Graupner)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Circlick securite
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 75 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension lead 15 cm Multiplex
1 x	Extension 7.5 cm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Extension silicon 25 cm (Futaba)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Futaba male 40 cm extension
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Extension 30 cm (Futaba)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Extension silicon 10 cm (Futaba)
2 x	Extension silicon 50 cm (Futaba)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	SyRen 10A 6V-24V Regenerative Motor Driver
1 x	Cabel "Y" 30 cm (graupner)
1 x	30 cm BEC cable (female)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	5 LiPo XH>EH adapter
1 x	CC 03
3 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	CM-3
1 x	Connector Sub-D 2+5 Male
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 02
2 x	CC 01
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
2 x	Connector Sub-D 2+5 Female
1 x	2 LiPo XH>EH adapter
1 x	Double conector with JR adapter and 200 mm extension
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	DPSI Ampere battery backer
1 x	Allen wheel collar M3x3
1 x	Tape GFK 50 mm
1 x	Clip mini fixing for wing (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	SE Ring 300 mm (2 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	140 mm rods set for direction control
1 x	Allen wheel collar M4x6
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
2 x	20x1000 mm Ring Strap Back To Back
2 x	SE Ring 200 mm (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 38 mm
3 x	SE Ring 350 mm (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x200 mm battery rings
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Cable grommet 9.5 mm (4 uds)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Spikes Band (5 m)
1 x	28x5 mm wires output (2 pcs)
1 x	Cinta Goldfix 1m
1 x	Allen wheel collar M3x5
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	45 mm rods set for direction control
1 x	SE Ring 450 mm (2 pcs)
1 x	80 mm rods set for direction control
1 x	SE Ring 400 mm (2 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Spinner NUT 1/4x28
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	"S" set for planes
1 x	Small aluminium horn gold (2pcs)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	TopFuel LiPo 20C-ECO-X 4600mAh 5S Competition F3A 2017
1 x	LiPo TopFuel ECO-X 5000 mAh 4s 35C MTAG
1 x	Battery RX JETI LiIon RB 6200 7.2v
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	F8F Bearcat #68 2.460 mm
1 x	LA-7 Lavochkin 2314 mm (CY model), Wheels and le
1 x	PHOENIX FW-190 FOCKE WULF - 1720 MM ARF KIT
3 x	Fokker DR-I 2400 mm (CY model)
1 x	LA-7 2134 mm(CY model)
1 x	LA-7 (CY model)2450 mm
1 x	SKY MASTER 3.000 mm ARF
1 x	LA-7 Lavochkin 2314 mm (CY model), Struts
1 x	Fokker D-VIII 2090 mm G/Y (CY model)
2 x	Cessna 310 Red/Gold 3200 mm (CY MODEL)
2 x	FW-190 2400mm Electric Landing gear complet (CY model),
1 x	Fokker D-VIII 2800 mm R/W (CY model)
2 x	Bidule 55 V3 2460 mm
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	Sebart 2.2 m WHITE/BLUE (SebART)
1 x	Antena FUTABA R7108/7014/7114SB (1 pc)
1 x	ZERO Figther A6M52 93", Electric retract Landing gear ELECTRO
1 x	FUTABA T10 J T-FHSS
1 x	Extension silicon 100 cm (Futaba)
1 x	Futaba Multi-Switch 16 MODUL
1 x	Focke Wulf FW-190A-8 93" (2362 mm)
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Fox 4000 mm Airworld,canopy frame
1 x	GP 15 JETA
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	ZERO Figther A6M52 93", Electric retract Landing gear
1 x	EWC6 40 cm wing connector
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Extension 5 lipos JST/C
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	Long Switch On/Off micro
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Switching module high voltage SXH
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Female connector for 20 pines AWG
1 x	SPARK Switch 12v
1 x	USB HLS prog. interface
1 x	PSC 6
1 x	Male connector for 16 pines AWG
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	JETImodel DPS 40
1 x	SPS 70V 100/200 A
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	Extension silicon 10 cm (Graupner)
1 x	PowerBox SparkSwitch RS
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	Small Crow DLE-170M
2 x	TMM 1210-3S heli
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Astra (Top Model)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x
1 x	Steering arm 16 mm Ø 4 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Actuator Electric 25 mm
1 x	Cockpit plastic closing
2 x	Fournier RF-4D
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	ASG 32 560 mm
1 x	Split M1,2x10 (10 pcs)
1 x	3 mm Prop Adapter M6
1 x	Kobuz 5000 mm (Airwold)
1 x	Propeller APC 14x5.5 MR Electric Pusher
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	Jeemo Dolly
1 x	25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x	LS-8 GFK 6m Glider
1 x	Fox 4000 mm Airworld,cabina
1 x	CAM-Carbon Light Prop 12x6"
1 x	X-RAY Micro QR (Tail Tube)
1 x	300x4 mm M4 shaft ship
1 x	Albatros ,spare cockpit (Top Model)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
1 x	ALBATROS 3.0 m (orange/white)
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	ACTIVE ARF Electric 1.995 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	ARTIST 1.560 mm
1 x	Albatros ,spare fuselage (Top Model)
1 x	BULLIT Wing 1095 mm
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Electric spoiler 300 mm (2 pcs)
1 x	Canopy Astra
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	11 mm wing servo holder
1 x	BULLIT Wing 840 mm
1 x	Avia (Top Model)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Electric spoiler 185 mm (2 pcs)
1 x	18 mm wing servo holder
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Astra wing Joinner (Top Model)
1 x	Electric spoiler 440 mm (2 pcs)
1 x	30 cm BEC cable (male)
1 x	Stinson Reliant Yellow/Blue 2910 mm
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	Support GFK propeller ple. 2Bl
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	P-47 Electric Landing gear complet (CY model),
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	P-47 Yellow (CY model)
1 x	EDGE 540-A 91" (2310 mm)
1 x	P-47 Struts + Wheels (CY model)
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x	VIPER JET G2 Esq. 5 Green/White/Blue
1 x	VIPER 1.7 Electric break wheels + structure
1 x	Starter 12v (Max 90 and 15ccm)
1 x	DPS Switch JR/JR
1 x	Battery LiPo GENS 2600 mAh 2S 7.4v Transmitter Pack (Gens Ace)
1 x	Battery LiPo GENS 4400 mAh 6S 22.2v 35C (Gens Ace)
1 x	Battery LiPo GENS 4800 mAh 5S 18.5V 18C (Gens Ace)
1 x	Wheel FEMA 140 mm / 6 mm
1 x	Carbon plate 550x350x1.0 mm ECOTECH
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon plate 350x150x2.5 mm
1 x	Crystal Universal RX 35.130 Ch 73
1 x	Carbon plate 550x350x4.0 mm ECOTECH
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	GLOW 5C + accesories
1 x	Aluminium ignition bad (blue)
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Wings Bags JEEMO
1 x	Ply-Span 450x600/13g White
1 x	SLICK 360-A 104" (2640 mm)
1 x	Spinner black 40-45mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Red spinner 40-45 mm
1 x	Spinner fixed propeller 60 mm / 5,0 mm
1 x	Battery LiPo GENS 160 mAh 2S 7.4V 30C (Gens Ace)
1 x	Battery LiPo GENS 5000 mAh 12S 44.4v 60/120C (Gens Ace)
1 x	Brake for 140 mm wheels
1 x	Z-shaped servo mount
1 x	Wheel FEMA 152 mm / 8 mm
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Compact on-board starting system (9724)
1 x	Wheel FEMA 127 mm / 6 mm

52,293.10EUR