3 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
3 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | Micro flex hinge (12 uds) |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | Gates hinge |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 18 mm reinforced hinge |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Flap hinge (6 pcs) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Large flex hinge (12 uds) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | 15 mm reinforced hinge |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Wing OXY 5,0 m2 |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
2 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | LUCAS pilot ARTF |
1 x | Aramid 50 daN 50 m |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Parachute P4 |
1 x | Paramotor BackPack XXS 2 |
1 x | Set cintas unión paracaídas 145 cm |
1 x | MAX pilot ARTF |
2 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | 200m servo "Premium" wire (white/red/blue) |
1 x | Ballast 700gr OPALE |
1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
2 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | 5 line servos wire black (1 m) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | Rescue 1,8m2 / BackPack |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Cockpit plastic closing |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
3 x | Locking cable tie 2.5x100 (uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Covered closure or fairings |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Canopy Latch |
1 x | Vacuum pump P1-N |
1 x | Hot Glue Stick BLACK |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Digital scale up to 40 kg |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Screwdriver for Torx® TX8 |
2 x | 2,0x50 mm allen screwdriver |
1 x | Screwdriver for Torx® TX6 |
2 x | Ball Link Plier |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Copier 5x20 cm pcs |
1 x | Dust collector for mould cleaning |
1 x | Cut tube |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Z Bender - S Type Tool |
1 x | Ball Link Plier |
1 x | Copier 2x20 cm pcs |
1 x | Vacuum pump 12 CFM |
1 x | |
2 x | Wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | 2 LiPo XH>EH adapter |
2 x | Balsa panel 2.0x100x1000 mm |
1 x | Trailing leg 131 mm |
2 x | Small pinned hinge (6 uds) |
1 x | Robart Door Hinge (Pk2) |
3 x | Gates hinge aluminium (1 pcs) |
3 x | Long pinned hinge (12 uds) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
2 x | Cable Cargador FUTABA |
1 x | Red silicone 1,0 qmm wire (50 m) |
2 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
2 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
3 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T, |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | Silicone black 4,0 qmm wire (25 m) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
2 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
1 x | Silicone red 1,0 qmm wire ( 1 m) |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Silicone red 6,0 qmm wire ( 1 m) |
1 x | Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | SERVO DES 806 Pignons |
2 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | SERVO DES 707 BB MG |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Servo GO-09 9g |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Split M1,2x10 (10 pcs) |
1 x | USB programador GO servos |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Servo GO-02 Digital 1.8g |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | TWIST planeador gomas |
2 x | PIT (Aero-Naut) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Threaded coupler M2 (10 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
3 x | ABS Strip 1.5x2.0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
2 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
2 x | KIRA 500-30 6,7:1 |
1 x | KIRA FAI 5F5/4s |
1 x | KIRA 480-34 5,2:1 |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Split pin 1.6x16 mm (10 uds) |
3 x | Allen wheel collar M3x5 |
1 x | Allen wheel collar M4x4 |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Landing gear frontal support 29x26x13,5 |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | Allen wheel collar M4x6 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Steel brush wheel with 2.35mm |
1 x | Mini-handed clamp |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Cockpit aluminium closing 4.7g |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | Mudguard for 140/165 mm wheels |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | NF-3 RC set |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | Tailwheel for 20/60 size |
1 x | Micro Crystal RX 35.120 Ch 72 |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Crystal Universal RX 35.020 Ch 62 |
2 x | Tail wheel for 5-8 kg models |
2 x | Suncover 100cc Red |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | Medium pin type hinge (12 uds) |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Tail wheel for 8-12 kg models |
1 x | Hovercraft sailcloth |
1 x | EasyFLY Addon |
1 x | Interface Jack Adapter IKARUS |
1 x | Indoor Brushed motor kit |
1 x | Servo NARO Max Std |
1 x | Tren de cola carbono 50-70cc |
1 x | PPS-4D Propeller |
3 x | Tailwheel for 40/90 size |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
2 x | MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER |
3 x | Cooler motor type 150 |
2 x | Cooler motor type 300 |
2 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | Cooler motor type 400 |
2 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | Motor holder for AC 28/7 |
1 x | Cooler motor type 280 |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Indoor hinge with servo arm integraded |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Retract undercarriage |
1 x | Bearings for motors hacker A50 |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Rigid coupling brass Ø 4.0 / 3.2 mm L: 25 mm |
1 x | Propeller RABOESCH M4 40 mm (3 Blades) (Right hydropropeller) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | 290 mm M5 Prop shaft |
1 x | Silicone black 6,0 qmm wire ( 1 m) |
1 x | 270 mm 3/3 mm shaft ship |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | A50 Backmountset complete V3/V4 |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
1 x | A40 Backmountset complete |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | A50 Motor Mount Alu complete set |
1 x | Esc MasterBasic 90 Opto |
1 x | Axle for motor A50-L |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | Silicone black 2,5 qmm wire ( 1 m) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Snap short M2 (10 uds) |
1 x | Pushrod octagone 3/2 |
1 x | PropCover 16-20" (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Window mounting channel 5m |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
2 x | Strip 2,0x2,0x330 mm |
2 x | KIRA 600-22 6,7:1 |
2 x | PYRO 900-52L |
1 x | KIRA 600-16 |
1 x | KIRA 400-27 |
1 x | KIRA 600-20 |
1 x | PYRO 700-56L |
1 x | Axle for motor A20-S (3 uds) |
1 x | Landing gear Rocket 400 |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Servo HBS 690BB HV Digital |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Angled clevis with threaded rod M3 |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | wire tensioner (silver) |
1 x | Servo GO-1013 MG 3.8kg |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Strip 1,5x1,5x330 mm |
2 x | Strip 2,5x1,25x330 mm |
1 x | Pushrod octagone 4/3 |
1 x | KIRA 480-34 |
1 x | PYRO 800-40 Long Axi |
1 x | PYRO 600-11 |
1 x | KONDOR 15-92 |
1 x | KIRA 600-17 |
1 x | PYRO 650-103 Long Axi |
1 x | KIRA 600-20 6,7:1 |
1 x | PYRO 650-53L EJE LARGO |
1 x | KIRA 480-38 |
1 x | PYRO 750-50L |
1 x | PYRO 750-50L Competition |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | KIRA 480-43 |
1 x | KIRA 400-39 5,2:1 |
1 x | KIRA 600-30 6,7:1 |
1 x | PYRO 600-12 |
1 x | KIRA 500-26 6,7:1 |
1 x | PYRO 700-45 |
1 x | KIRA 600-24 6,7:1 |
1 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Split pin 1x8 mm (10 uds) |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | CC 03 |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Round Rod 6,0x1000 mm |
1 x | |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Tailwheel for 1-3 kg models |
1 x | Tail gear set (60-120 class) |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | Long pinned hinge (6 uds) |
1 x | |
1 x | MAMBO 17 |
|
23,691.13EUR |