60.00EUR

Servo GO-12S70MG 20.5kg.cm 0.06s/60º
[KAV2012S70MG]


High torque/extra high speed programmable digital standard servo 69g with a coreless motor, hardened steel gears and wide input voltage range 4.8-8.4V, 2xBB; ideal for 1:8/1:10 on-road RC cars, etc. Torque 12.0kg.cm, speed 0.100s/60° at 4.8V, torque 15.0kg.cm, speed 0.082s/60° at 6.0V, torque 18.0kg.cm, speed 0.070s/60° at 7.4V, torque 20.5kg.cm, speed 0.060s/60° at 8.4V. An aluminium middle case heatsink for perfect cooling under high load. Dimensions 40x20x37.2mm, weight 69g.
High torque/extra high speed standard digital servo with a coreless motor and double BB-ed output shaft for general use in all kind of RC models - great for 1:10 on-road RC cars etc. A plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-12S70MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on. Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.
Servo dimensions Standard
Servo type Digital
Programmable Yes
Thrust at 4.8V [kg∙cm] 12
Thrust at 6.0V [kg∙cm] 15
Thrust at 7.4V [kg∙cm] 18
Thrust at 8.4V [kg∙cm] 20.5
Speed at 4.8V [s/60st.] 0.1
Speed at 6.0V [s/60st.] 0.082
Speed at 7.4V [s/60st.] 0.07
Speed at 8.4V [s/60st.] 0.06
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40
Width [mm] 20
Height [mm] 37.2
Weight [g] 69
Intended for Aeroplanes,Helicopters,On-road cars
Water resistance No


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Motor DLE 200cc Premium Muffler
1 x Motor DLE 170 M- Paramotors
1 x Silent-blocks DLE 170M
1 x Motor DLE 430 cc - Paramotors
1 x Cylinder for DA-60 and DA-120
1 x BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x Piston ring for DA-85 and DA-170
2 x Motor DLE 35 RA
2 x Cylinder DA-50R, DA-100, DA-100L
1 x Pick up DA50/100/150
1 x Hifht speed needle DA-50R/100I
1 x L ELBOW 90º ø 25 mm
2 x Motor DLE 61 cc
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Prop washer for DA-85, DA-100, DA-100L, DA-120
1 x Motor DLE 170 cc Twin
1 x Motor DLE 20 cc
1 x Ignition for DA-35 (without pickup sensor)
1 x Reed valve carrier, without reed valves DA-150L/170
2 x Canister combo DLE 111 cc
1 x Canister combo DLE 55 cc
1 x Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x Rear crankcase DA-50R
1 x Reed valve cage with petals for DA 100/150
1 x Motor DLE 65 cc
2 x Reed valve carrier for DA-85, DA-100L and DA-120
2 x ‎Reed valve for DA-60/70
1 x Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece
1 x L ELBOW DA-120 long (2 pcs)
1 x Motor DLE 60 cc Twin
1 x Motor DLE 20 RA cc
1 x Ignition for DA-50-R, DA-60, DA-85
3 x Motor DLE 30 cc V2
1 x Woodruff key for DA50/85/100/150 and DA 200
1 x Front axi for DA85/DA100/DA100L/DA120
1 x Motor DA 150
1 x Carburator gasket MOKI
1 x COMFORT MOUNT ø 60mm
1 x Small Crow DLE-170M
1 x Fixed launching hook
2 x Angle of incidence meter
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Motor DLE 55 RA
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Motor DLE 200cc Std
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Prop hub for DA-100, DA-100L
1 x Motor DLE 85 cc
1 x Joint for DA-50 reed valv
1 x Bearing upper rod DA-50R, DA-60, DA-100, DA-100L, DA-120
1 x Piston for DA-50R, DA-100, DA-100L
1 x Cylinder for DA-85/170 (1 piece)
1 x DA-50R motor alumine support
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x SIMtransmitter 6 Mode 2
1 x Ferrita 17x10x6.5 mm
1 x Black silicone 1,0 qmm wire (50 m)
1 x White smoke canister 100 g
1 x 50m servo "Premium" wire (white/red/blue)
1 x Profile ABS half cane 3x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x White smoke bombs AX-18 (5 pcs)
1 x EasyFLY Addon
1 x Profile ABS Square 1 x 1000 mm
1 x Ball Link ALU M3 - RH (1 pcs)
2 x Truck-trailer for gliders 720 x 285 mm
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Couple M4 for wire (10 pcs)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Profile ABS half cane 5.0x1000 mm
1 x PCARD Wireless System
1 x ABS angle 1.5x1.5x1000 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x ABS tube 12.0x10.0x1000 mm
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Actuador lineal HLS12-100210-7.4v
1 x Long pinned hinge (12 uds)
1 x Micro flex hinge (12 uds)
1 x Futaba 2x20 mm servo double arm
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Hitec 38 mm servo arm with ball link
1 x 
1 x PowerBox 12
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Support Flush MPX Conector (6 pcs)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
2 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x WingFix ULTRA Black Edition
1 x Oracover light Grey 2m
1 x T-Connector 4.0 mm x 1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x Medidor ángulos y/o incidencias
1 x Ignition unit for DA-70/100/120/150/170/200
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Futaba 25 mm servo arm with ball link
1 x Futaba 38 mm servo arm with ball link
1 x 15 mm reinforced hinge
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Hitec 38 mm servo arm
1 x Adapter rotula M3
1 x Ferrita 27x14x7 mm
1 x 46 mm Futaba servo arm tandem with ball link
1 x 25 mm reinforced hinge
1 x Baal link 4/14/4 (5 pcs)
1 x PowerBox MERCURY SR2
1 x Blades 330mm
1 x Safetyclip MPX (6 pcs)
1 x LA500 housing-lower cyclic
1 x Pilot LA 500
1 x PowerBox iGyro SRS
1 x Power Box GPS Sensor III
1 x LA500 front gear holder
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Soporte filtro FESTO (4 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x Thermoforming sheet 0.3mm (0.039in) DIN A4
2 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
34,167.14EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies