1 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita con funda |
2 x | SUS wire 3m (nylon coated) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
4 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
4 x | Steering arm 16 mm Ø 3 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | One touch canopy lock |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Covered closure or fairings |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Cockpit plastic closing |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Cap closure 33/23.5mm (2 uds) |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | 30 cm BEC cable (female) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 01 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | USB Mini Camera endoscope |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Dean "T" - Futaba Adapter |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 30 cm BEC cable (male) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | TrainerCord (master-learner) |
2 x | 2 LiPo XH>EH adapter |
2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | M3 Maxi ball link (2 uds) |
1 x | Ball link M2 (10 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Socket head ball link M3 (2 uds) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Pine wood slat 10x10x1000 mm |
3 x | Beech dowels 2.0 x 1000 mm |
2 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 100 cm (Futaba) |
2 x | Premium servo extension 25cm |
2 x | Cable S.BUS 3 salidas 300 mm |
2 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Circlick securite |
4 x | Futaba Female 40 cm extension |
2 x | Prolongador S-Bus JR/JR 10cm |
3 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | Extension 90 cm (Futaba) |
2 x | Cabel "Y" 30 cm (Futaba) |
3 x | 200 mm extensión servo HITEC/JR |
1 x | Extension silicon 100 cm (Graupner) |
2 x | Futaba Female 40 cm extension |
2 x | Extension 30 cm (Futaba) |
1 x | Extension 15 cm (Futaba) |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
2 x | Extension lead 15 cm Multiplex |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Cabel "Y" 15 cm |
1 x | Cable S.BUS 3 salidas 100 mm |
2 x | Extension silicon 30 cm female (Futaba) |
2 x | Extension silicon 30 cm male (Futaba) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Smoke set "Glider" |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Support FUEL DOT V3 |
1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
2 x | Universal batery Tester |
1 x | Soporte grifo FESTO (2 pcs) |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | 140 mm rods + T patellas set for direction control |
1 x | Clip fixing for wing (2 pcs) |
1 x | Allen wheel collar M3x5 |
2 x | Cockpit aluminium closing 4.7g |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Cockpit metalic closing |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Window mounting channel 5m |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Snap short M2 (10 uds) |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Sanyo RX Battery Eneloop 6,0 V Futaba |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Tip wing protector 40x14 (2 pcs) |
2 x | Sanyo RX Battery Eneloop 6,0 V JR |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | BALSA trip 10x10x1000 mm |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Screw-lock connector M2 (2 uds) |
2 x | Extension 7.5 cm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Switching module high voltage SXH |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Opto Gas Engine Kill Switch |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Connector Sub-D 2+5 Female |
2 x | 800TVL CMOS camera for FPV |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Connector CAN 15 |
1 x | CC 05 |
1 x | PSC 6 |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | USB HLS prog. interface |
1 x | 4 LiPo XH>EH adapter |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Futaba male 40 cm extension |
2 x | Extension silicon 10 cm (Graupner) |
2 x | Extension silicon 50 cm (Futaba) |
1 x | Extension silicon 10 cm (Futaba) |
3 x | 1000 ccm gasoline fuel tank |
2 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
3 x | 29x12 prop Super Silence |
3 x | 3-blades 28x12 carbon prop Super Silence |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 28x12 prop Super Silence |
2 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 25 mm carbon servo arm |
2 x | 101x28 mm (4.0") Type jets aluminium core wheel |
2 x | |
2 x | 1/6 Pilot "Garry" |
2 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | 100g Flux Paste for Silver Solder |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | 22x10 prop Super Silence |
2 x | 500 ccm gasoline fuel tank |
3 x | 30x14 prop Super Silence |
1 x | 27x10 prop Super Silence |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
4 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
2 x | 55% silver electrodes (2 pcs) |
2 x | 3-blades 30x12 carbon prop Super Silence |
2 x | 24x14 prop Super Silence |
3 x | 3-blades 20x12 carbon prop Super Silence |
2 x | |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | 1000 ccm complete gasoline fuel tank |
2 x | 3-blades 29x12 carbon prop Super Silence |
2 x | 3-blades 20x10 carbon prop Super Silence |
3 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | 3-blades 24x12 carbon prop Super Silence |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | |
1 x | 3-blades 21x12carbon prop Super Silence |
3 x | 3-blades 27x12 carbon prop Super Silence |
1 x | Lipo FOXY G3 4500 mAh 11.1v 40/80C |
2 x | 1/12 Pilot "Cougar" |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
2 x | 160 mm carbon undercarriage (2pcs) |
1 x | 1/6 Pilot "Tony" |
2 x | "Taxi Tank" Fuel Tank |
2 x | 1/7 Pilot "Japanese" |
2 x | |
2 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 20x200 mm battery rings |
2 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
1 x | 100x50 mm SLH KOVO wheel |
2 x | 1/6 Pilot "John" |
1 x | 1/4 Pilot "Heidi" |
1 x | 1000 cc gasoline fuel tank complet |
2 x | 1/6 Pilot "Buddy" |
1 x | 120x60 mm SLH KOVO wheel |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | 1/10 Pilot "Jack" |
2 x | 102 mm aluminium spinner |
1 x | 1/12 Pilot "Tom" |
1 x | 18m Fitting barb |
2 x | 102 mm INO spinner (carbon imitation) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | 80 mm rods set for direction control |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Adaptadores carga 6s JST-XH |
1 x | Sanyo TX Battery Eneloop 9,6 V Hitec |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Sanyo RX Battery Eneloop 4,0 V AAA JR |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Pushrod octagone 3/2 |
1 x | Sanyo RX Battery Eneloop RX 4,8 V Futaba |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
3 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Charger SKY RC D200 neo |
1 x | Canopy Latch |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
2 x | AXI 2808/24 V2 |
1 x | Motor Mega AC 22/45/02 E |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Extension 6 lipos XH > EH |
1 x | Motor Mega AC 16/25/06 |
1 x | OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar |
1 x | Extension silicon 75 cm (Graupner) |
2 x | 15 cm PTFE-tubing for 25 mm tubes |
1 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | SBEC Jeti |
1 x | AXI 2212/20 V2 |
1 x | EWC6 40 cm wing connector |
1 x | JETImodel Addcap 1640 |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | PYRO 650-53L EJE LARGO |
1 x | Female connector for 20 pines AWG |
1 x | Motor Mega AC 16/15/04 |
1 x | DPSI magnetic switch actuator (housing) |
2 x | AXI 2814/16 V2 |
2 x | JETImodel DPS 40 |
1 x | AXI 2820/8 V2 Long |
1 x | Micro Switch button |
2 x | AXI 2814/20 V2 Long |
1 x | SPS 70V 140/280 A |
1 x | AXI 2814/6D V2 |
1 x | DPS Switch JR/JR |
1 x | Motor Mega AC 16/15/03 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | JETImodel SINGLE BEC |
1 x | Motor A30-14 L V4 |
1 x | A60-6XS V4 28-Pole |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Motor Mega AC 16/15/07 |
1 x | KIRA 480-38 |
1 x | AXI 2826/12 V2 Long |
1 x | Motor A60-7XS V4 28-pole kv330 |
1 x | PYRO 900-52L |
1 x | Motor A50-14L Turnado V3 Glider |
2 x | AXI 2820/12 V2 |
1 x | Motor Mega AC 22/35 4S |
1 x | Interruptor RX/Batterie |
1 x | Female connector for 12 pines AWG |
1 x | Motor Mega AC CAR 10 PRO |
1 x | AXI 2217/12 V2 |
1 x | AXI 2212/12 V2 |
1 x | Suncover 100cc Red |
1 x | OS Engine 105HZ-R Heli with pipe 105 |
1 x | Short Switch On/Off micro |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm |
1 x | Motor Mega AC 16/25/03 |
1 x | Motor Mega AC 22/30/03 |
1 x | Motor A50-16 S V4 |
1 x | Extension Arm for Carburetor |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | ZENOAH ZG 80B |
1 x | Tufnol Choke Lever Arm d=4,7mm |
2 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Bags de Luxe ODYSSEY |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Reed valve for DA-60/70 |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace) |
1 x | AXI 2820/8 V2 |
3 x | AC-10 pre-rotacion with motor |
1 x | 8 mm Adapter for AXI53xx |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | DA 70 Twin Gas Engine |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 10 mm gas motor standoff |
1 x | Premium servo extension 75cm |
1 x | Cable video GoPro and 5V cable |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | 24x12 prop Super Silence |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Stainless Steel Muffler D.A. 35-70 |
1 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | AXI 2808/24 V2 Long |
3 x | Aluminium servo arm (2 uds) |
1 x | Battery LiPo GENS 5500 mAh 5S 18.5v 25C (Gens Ace) |
1 x | Short reed valve petal for DA 100-R carburator |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | AXI 2814/12 V2 Long |
1 x | AXI 2820/10 V2 Long |
1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Axle for AXI 2814/xx motors |
1 x | Sanyo RX Battery Eneloop 6,0 V FUT |
1 x | Bearing 698-2Z for AXI 5330/xx |
1 x | RX cabel |
1 x | Axle for AXI 2808/xx motors |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | Axle for AXI 4130 V2 motors |
1 x | Axle for AXI 2820/xx motors |
1 x | Sensor Ignition RCEXL Universal |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | Smoke pump RCEXL |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Carburator Moki S250 |
1 x | Electric Fuel Pump 12V |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | LiPo Storage Box Type "BIG" |
1 x | Electric Fuel pump |
1 x | Motor ORBIT 20-12 with coolingfan |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 24x10 prop Super Silence |
1 x | 500 ccm complete gasoline fuel tank |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Prop shaft ZG 23SL and ZG 26SC |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ZENOAH ZG 62 SL |
1 x | Stainless Steel Muffler D.A. 50/100/120 |
1 x | Reed valve petal for DA 60 carburator |
1 x | Titan 2.8:1 reduction gear, inline |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Screw for mounting plate of DA100/120 |
1 x | Stainless Steel Bend D 28x0,6mm |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | ZG231cc SHL |
1 x | Spark plug capZG 20/ZG 26EI with HT lead |
1 x | Silencer with rear exhaust DA-120 |
1 x | Tygon tube 7.94 x 4.7 mm 15 m |
1 x | 80x40 mm hard foam KOVO wheel |
1 x | Metal gasket elbow/cilinder DA60R/DA120 |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | AXI 2808/16 V2 |
1 x | Battery Protection Circuit Board 22.2v 6s |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Battery LiPo GENS 2200 mAh 2S 7.4v 60C (Gens Ace) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | AXI 2820/14 V2 Long |
2 x | Ball link Aluminio M3 (2 pcs) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Battery LiPo GENS 5000 mAh 12S 44.4v 45C (Gens Ace) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | AXI 2808/20 V2 |
1 x | Battery LiPo GENS 1800 mAh 4S 14.8v 25C (Gens Ace) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hot Glue Stick GREEN |
1 x | Battery LiPo GENS 4400 mAh 7S 25.9v 35C (Gens Ace) |
1 x | Gasket for motor DA 50-R |
1 x | Stainess steel exhaust flange for ZG20 / ZG22 / ZG23/ ZG26 / G23 |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 60C (Gens Ace) |
1 x | Xplorer2 anemometro |
1 x | Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace) |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Z Bender - S Type Tool |
1 x | VM 2020/20 rear |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | AXI 2814/20 V2 |
1 x | Battery Lipo GENS 4000 mAh 7.4v TX |
1 x | Exhaust gasket for ZG20/ZG22/ZG23/ZG231 ZG26/G2D96-D/G230RC/G260 |
2 x | Hot Glue Stick RED |
1 x | Lipo GENS 200 mAh 1s 3.7 45C (2 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Bags wings/rudder ASPIRE |
1 x | Long reed valve petal for DA 100-R carburator |
1 x | Oils Pumps Empty (1 liter) |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | 1/12 Pilot "Fighter" |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | 280 cc gasoline fuel tank complet |
1 x | 22m Fitting barb |
1 x | 1/6 Pilot "Cindy" |
1 x | 1/10 Pilot "Jimmy" |
1 x | Allen wheel collar M4x6 |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Double side nipple |
|
25,176.09EUR |