59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Conector FUTABA Servo male  (10 pcs)
Conector FUTABA Servo male (10 pcs)

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ventus 1:4 set of instruments
2 x Extractor piñones 2.3/3.2 mm
1 x Vasa model Catapult
2 x Glases Innovation Plus
2 x Glases Nimbus
1 x Glases Moritz
1 x Brass rod Ø 0.5 mm x 1000 mm
2 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Electric spoiler 250 mm (2 pcs)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Covered closure or fairings
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Steering arm 16 mm Ø 4 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Locking cable tie 2.5x100 (uds)
1 x Locking cable tie 3.2x142 (uds)
1 x SUS wire 3m (nylon coated)
1 x Screw-lock connector M2 (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Lock washer 3.2 mm (20 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Quicklock washer 3 mm (10 pcs)
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Aluminium wide washer M4 Red (4 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Extension 100 cm (Futaba)
1 x Profile ABS half cane 7.0x1000 mm
2 x Support FUEL DOT V3
2 x Support XT60 conector (2 pcs)
1 x Aero-Master (Aero-naut)
1 x LUNAK 4,00 m
1 x Canopy Sweet / Siesta
2 x IKURA 4.0 m
2 x Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m
1 x Fox MDM 1 4000 mm Std.
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x LO 100 ARC 3.3m
1 x Fascination 3600 mm ARC
1 x Canopy Astra
1 x Albatros ,spare fuselage (Top Model)
1 x HERON RR
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x GP 15 JETA
1 x Astra (Top Model)
1 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x Electric spoiler 185 mm (2 pcs)
1 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x Albatros ,spare cockpit (Top Model)
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Glases Aspen
2 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Snap for floding prop for 2 mm axi
2 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
2 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
2 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Oracover light Grey 2m
1 x 
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Tape GFK 38 mm
1 x Cockpit aluminium closing
1 x Split pin 1x8 mm (10 uds)
1 x Lead with adhesive (2 pcs)
1 x Split pin 1.6x16 mm (10 uds)
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Horn with ball 55x40
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Micro control horn (2 pcs)
1 x RH long aluminium horn (2pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Support Pitot JETI
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Ventus 2cx 4.5 m Winglets
1 x Kobuz 5000 mm (Airwold)
1 x Soporte grifo FESTO (2 pcs)
1 x 50N turbine start protection tube
1 x FOX MDM-1 3.500 mm ARF White
1 x Swift S1 De-luxe 3.730 mm
1 x SHK 4000 mm Scale 1:4.25
1 x Fox MDM 1 6000 mm
1 x Swift S1 De-luxe 3.140 mm
1 x Ventus 2cx 4.5 m de Luxe
1 x LO 100 ARC 3.3m,frame canopy
1 x SOLOFOX 5m Voll-GfK
1 x 250 mm / 16 mm Airbrakes
1 x Sliding window 1:2,4 / 1.2,6 Scale
1 x Electric spoiler 300 mm (2 pcs)
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Siesta T tail (Topmodel)
1 x THERMIK XXXL 4,9m D-Box Electric
1 x OSD Telemetry sensor
1 x MYSTIQUE 2.9 m ARF
1 x Ka 8 B (Top Model)
1 x FUNRAY RR
1 x Q-12 2000 mm Electric
1 x Glases Stratus
1 x Prelude ARF 2500 mm, spare wing (TopModel)
1 x GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C
1 x IKURA GPS 4.28 m
1 x Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x XENON RC (Aero-naut)
1 x Poerfly
1 x Propeller APC 13x10 Electric
1 x Propeller APC 11x4.7 SF
1 x Propeller APC 10x4.7
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x Spinner plastic white fixed propeller 42 mm
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x 102 mm INO spinner (carbon imitation)
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x Marker ties (20 pcs)
1 x 45 mm black plastic spinner for fixed propeller
1 x Falcon Carbon Spinner 82mm for electric motor
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x Quick hose connector 3-3 mm
1 x T-Hose connector 2-2-2 mm
1 x Y-Hose connector 6-6-6 mm
1 x Racor "Y" 3 mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Quick hose connector 4-3 mm
1 x TAKEO 3.6m electric
1 x Birch plywood plate 600x300x1.2 mm
1 x Charger SKY RC e680
1 x Propeller APC 12x8 Electric
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Propeller APC 13x8 Electric
1 x Propeller APC 11x4.7 SF Pusher
1 x Propeller APC 12x10 Electric
1 x Propeller APC 10x6 Electric
1 x Propeller APC 13x4 Electric Pusher
1 x Propeller APC 13x6.5 Electric Pusher
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 8.0x7.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x 57 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x F3A carbon 95 mm spinner
1 x Cono NUT 5/16"x 24 -M4
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spinner INOVA 45 mm White
1 x SE Ring 250 mm (2 pcs)
1 x Spikes Band (5 m)
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x Spinner INOVA 102 mm Black
1 x SE Ring 240 mm (2 pcs)
1 x 36 mm white plastic spinner for fixed propeller
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Tape GFK 25 mm
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x 36 mm black plastic spinner for fixed propeller
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x 82 mm INO spinner (carbon imitation)
1 x SE Ring 300 mm (2 pcs)
1 x Spinner plastic red fixed propeller 30 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x F3A carbon 80 mm spinner for Spark EVO
1 x Foil for sticking flaps and ailerons
1 x 50 mm black plastic spinner for fixed propeller
1 x 75 mm INO spinner (carbon imitation)
1 x 89 mm INO spinner (carbon imitation)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x 36 mm red plastic spinner for fixed propeller
1 x Cinta Goldfix 1m
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Spinner plastic black fixed propeller 30 mm
1 x 50 mm white plastic spinner for fixed propeller
1 x Spinner INOVA 63 mm White
1 x 45 mm white plastic spinner for fixed propeller
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x FESTO connector M7 Quick 4mm 90º
1 x Ciano KAVAN Thin 20g
1 x Y-Hose connector 2-2-2 mm
1 x Y-Hose connector 4mm
1 x FESTO connector M7 barb fitting XL Tygon
1 x T-Hose connector 4-4-4mm
1 x Festo Adaptor Tygon Large/4mm
1 x Check valve quick hose connector 4-4 mm
1 x FESTO connector M7 Quick 4 mm
1 x FESTO Filter 6 mm
1 x Quick hose connector 6-6 mm
1 x FESTO connector M7 barb fitting 6mm
1 x T-Hose connector 3-3-3 mm
1 x Tap FESTO 6-6 mm
1 x FESTO connector M5 Quick 4 mm
1 x Quick hose connector 4-4 mm
1 x Faucet FESTO
1 x Racor 4/3 mm
1 x Racor 3/3 mm
1 x Y-Hose connector 4-4-4mm
1 x FESTO Filter 4 mm
1 x T-Hose connector 3-3-3 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Long pinned hinge (12 uds)
44,804.49EUR
Manufacturers
Languages
Español English
Currencies