1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Canopy Latch |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Locking cable tie 3.2x142 (uds) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Covered closure or fairings |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | 1/12 Pilot "Langley" |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | 2 LiPo XH>EH adapter |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | USB HLS prog. interface |
2 x | CC 01 |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | 1/12 Pilot "Cougar" |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Hot Glue Stick RED |
2 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Hot Glue Stick GREEN |
1 x | Xplorer2 anemometro |
1 x | Ball Link Plier |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | BALSA trip 10x10x1000 mm |
1 x | MAX pilot ARTF |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Opto Gas Engine Kill Switch |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | PSC 5 |
1 x | MAX BEC 2D plus EX |
1 x | Prolonguer for Balancer Thunder Power 6S |
2 x | SBEC 40 |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | Opto Gas Engine Kill Switch |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | Epoxy Resin L (2.5 Kg) |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | 82 mm aluminium spinner. |
1 x | 82 mm INO spinner (carbon imitation) |
1 x | CC 02 |
1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
1 x | 90x45 mm hard foam KOVO wheel |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | 95 mm aluminium spinner. |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Metal ring front FEMA |
1 x | Landing gear strap small (4 uds) |
1 x | 100 mm rods set for direction control |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | 45 mm rods set for direction control |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Aluminium servo arm (2 uds) |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | 89 mm INO spinner (carbon imitation) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Adapter lead MPX/EC3 |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | 89 mm aluminium spinner. |
1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Charger SKY RC D200 neo |
2 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
2 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | 20x200 mm battery rings |
1 x | Tray for FUTABA 18 SZ |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | Tubo Teflon Ø25 mm x 10cm |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Vest clothes Hispano Aviación |
1 x | Spinner INOVA 45 mm White |
1 x | 75 mm INO spinner (carbon imitation) |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | 45 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Male Prolonger TP 4/5S |
1 x | Racor 4/4 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Racor "Y" 3 mm |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Circlick securite |
1 x | CC 05 |
1 x | Connector CAN 15 |
1 x | Pendulun "luxe" to tank |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Multi-adapter balancer JST - TP |
1 x | 70 mm INO spinner (carbon imitation) |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Horn with ball 55x40 |
1 x | Small aluminium horn red (2pcs) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | SBEC 30 D |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Dual Sequencer Gear and Canopy |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Racor 4/3 mm |
1 x | Nylon gear block Ø 6 mm (2 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Racor 4/6 mm |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | Pendulun "Special" to tank 60g |
1 x | TrainerCord (master-learner) |
1 x | Carbon blade 3D 230 mm |
1 x | PC-21 PILATUS Spinner Scale Red 3 Blades |
1 x | Rescue 1,8m2 / BackPack |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Tacometer mini ignition RCEXL |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Three-function control switch by FUTABA |
1 x | Mini neumatic retract landing gear |
1 x | Tren de cola carbono 50-70cc |
1 x | 18m Fitting barb |
1 x | EC-Cutter |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | VBar Control Touch, midnight black |
1 x | Logo 400 SE VBar |
1 x | Tail boom brace LOGO 480 |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | VTX 477 Carbon Rotorblade |
|
9,144.12EUR |