1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
3 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
3 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | 2,3 mm Prop Adapter M5 |
1 x | 2 mm Prop Adapter M5 |
1 x | 4 mm Prop Adapter M6 |
1 x | Ventus 1:4 set of instruments |
1 x | Motor A2212/13T |
1 x | Paint gun for sprays |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Tape GFK 38 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | 1/12 Pilot "Langley" |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | 2,5x60 mm allen screwdriver |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 45 mm rods set for direction control |
1 x | 140 mm rods set for direction control |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Conector JR Servo female (50 pcs) |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | Power supply NT 25 Amp. |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Ball Link Plier |
1 x | Crimping tool |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Dust collector for mould cleaning |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 100 mm rods set for direction control |
1 x | Digital precision scale up to 2000 g |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
3 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
2 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | Landing gear Rocket 400 |
2 x | P 17×5.8 Prop-2PCS/PAIR |
2 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | 2 LiPo XH>EH adapter |
1 x | Heli blades angle measurer |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Cockpit plastic closing |
2 x | Tip wing protector 40x14 (2 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | Mini-handed clamp |
1 x | Allen wheel collar M4x6 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Heat Seal Iron |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Spinner NUT M8x1,25 |
1 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
1 x | 3 LiPo XH>EH adapter |
1 x | Propeller diller for DLE170 |
1 x | Handle for PERMAGRIT lime |
1 x | Allen wheel collar M4x4 |
1 x | Hot Glue Stick BLACK |
1 x | Canopy Latch |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Mold plugs XT-30 |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Pistola termica MH 550 micro |
1 x | Snap long M2 (10 uds) |
1 x | Allen wheel collar M3x3 |
1 x | MPX plug mold V1 |
1 x | Control for forward wheel (MINI) |
1 x | Kwik link unmount tool |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Precision wrench L100 mm |
1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Window mounting channel 5m |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Propeller set 400 (2R+2L) |
|
3,074.78EUR |