50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Conector MR-60 (pareja)
2 x Crimping tool
1 x Turbina KINGTECH K320 G5
1 x Starter EM Gear Power 80
2 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
2 x EXTRA NG 74" white/red/blue (Skywing RC)
2 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Horn 6/35 with M3 Bearing
1 x Small aluminium horn blue (2pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x Horn 5/20 with M2 Bearing
1 x 6 mm aluminium horn with patella
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Small aluminium horn gold (2pcs)
1 x Horn 5/10 with M2 Bearing
1 x Horn with ball 40x30
1 x 6 mm red aluminium threaded horn with patella
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x 20 mm carbon horn
1 x Brass control horn M4 short for wire (4 pcs)
1 x Wheel collar 5 mm Ø (4 uds)
3 x Aluminun wheel collar 2 mm Ø (4 uds)
2 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Wheel collar 2 mm Ø (4 uds)
1 x Field folding model stand SebArt
1 x Propeller balancer
1 x Field folding model stand
2 x Angle measurer
2 x Truck-trailer for gliders 720 x 239 mm
1 x Angle of incidence meter
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x L-Connector 4.0 mm x 1000 mm
1 x Digital weight, angle and balance meter BASIC
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Profile ABS half cane 8.0x1000 mm
1 x Digital precision scale up to 2000 g
1 x Strip 2,5x1,25x330 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 16.0x14.0x1000 mm
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x 
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support FUEL DOT V3
1 x Receptor CORE PBR-26XS 26ch
2 x TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x APM2.6 Power module with 5.3V DC BEC
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Indoor hinge with servo arm integraded
1 x Extension MPX-MPX 20 cm
1 x Adaptadores carga 6s JST-XH
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Horn mando small (2 pcs)
1 x Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Micro control horn (2 pcs)
1 x Horn mando long (2 pcs)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x Extra long horn 60x30
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Tailwheel for 20/60 size
2 x TX 250 mW especial GOPRO
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x Tailwheel for F3A size
2 x Cable video GoPro
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Pine wood slat 3.0x7.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
2 x Pine wood slat 5.0x5.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Beech dowels 2.0 x 1000 mm
2 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Hot Glue Stick RED
1 x Crystal Universal RX 35.140 Ch 74
1 x PPS-4D Propeller
1 x NoNa BB wheel Ø200x60mm in pair
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x Crystal Universal RX 35.020 Ch 62
1 x DJI FPV Combo
1 x Crystal Universal RX 35.130 Ch 73
1 x GameCommander USB Universal
1 x Servo NARO Max Std
1 x Slave-cable USB Easy Sim
1 x Hovercraft sailcloth
1 x DJI Mavic Air Fly More Combo
1 x Crystal Universal TX 35.140 Ch 74
1 x EasyFLY Addon
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x Long horn 50x26
1 x Micro control horn T2 Ø 1
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Adjustable brass horn threaded M3
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x 45 mm rods + T patellas set for direction control
1 x 140 mm rods + T patellas set for direction control
1 x 5 mm M2 variable horn
1 x Futaba 2x20 mm servo double arm
1 x Futaba 54 mm servo arm with ball link
1 x 46 mm Futaba servo arm tandem with ball link
1 x HITEC 20 mm servo arm with ball link
1 x Propeller electric carbon 8.5x6
1 x ANGEL 48" pp orange/black/white
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x AC-10 pre-rotacion with motor
1 x Smoke pump RCEXL
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x 800TVL CMOS camera for FPV
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Propeller POWER-PROP 11x8
1 x Propeller electric carbon 7x7
1 x Propeller POWER-PROP 10x7
1 x Porpeller HUNTER 400
1 x Propeller electric carbon 10x8
1 x PT 16x10 E Propeller
1 x PT 21x13 EL Propeller 3 Blade
1 x Balsa panel 5.0x100x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Balsa panel 6.0x100x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Propeller electric carbon 9.5x6
1 x PROPELLER ELECTRIC glass 9,5x6
1 x 20x200 mm battery rings
1 x Gates hinge 30x16 mm (2 pcs)
1 x Robart Door Hinge (Pk2)
1 x Cable video GoPro and 5V cable
1 x Electric Fuel Pump 12V
1 x Captador RCEXL para DA
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Extension Arm for Carburetor (red)
1 x LiPo Storage Box Type "BIG"
1 x Sensor Ignition RCEXL Universal
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Extension Arm for Carburetor
1 x PT 21x13 EL Propeller
1 x Gates hinge aluminium (1 pcs)
1 x Carburator Moki S400
1 x 25 mm carbon servo arm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Vacuum pump 12 CFM
1 x Carburator Moki S250
1 x Trailing edge BALSA 35x8x1000 mm
1 x Bungee HLG Premium
1 x RX external cable for estandar receivers
20,815.88EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies