1 x | Jeti Black cap |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Angle measurer |
1 x | Field folding model stand SebArt |
1 x | Angle of incidence meter |
1 x | Surface Indicator Gauge Small |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | 18 mm reinforced hinge |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Long pinned hinge (12 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | 15 mm reinforced hinge |
2 x | 25 mm reinforced hinge |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Gates hinge |
4 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
2 x | Vacuum bag, 1200 mm x 50 m |
2 x | Softshell Hispano Aviación |
1 x | Large flex hinge (12 uds) |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
3 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Miniature brass strap hinge, 1 m |
1 x | Cap Hispano Aviación |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Medidor ángulos y/o incidencias |
1 x | Small flex hinge (12 uds) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
2 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Chopped glass fibre strands 0.2 mm |
2 x | Carbon plate 350x150x1.0 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
2 x | Glass fabric 425 g/m² aero,10x1m |
2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
2 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
2 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Buy Perforated film 100 cm / 20 m |
2 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
3 x | Styrene plate 320x120x0.5 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
2 x | Shirt Hispano Aviación |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
2 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
3 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
4 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz |
1 x | TX 250 mW especial GOPRO |
1 x | 5 LiPo XH>EH adapter |
1 x | TrainerCord (master-learner) |
1 x | 30 cm BEC cable (male) |
1 x | BEC 3A FOXY |
1 x | Ferrita 27x14x7 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
2 x | Propeller CFK 16x16 Wide |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller CFK 20x13 |
1 x | Hardener Aero EPH 161 (500 g) |
2 x | 5 mm gas motor standoff |
2 x | 10 mm gas motor standoff |
2 x | aluminium servo arm V1-JR 1,0 inch M2 |
2 x | 40 mm gas motor standoff |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Actro 32-3 Heli MAX 5mm |
2 x | 120x60 mm SLH KOVO wheel |
2 x | Antonov AN2 Scale 1/6 - 3m |
1 x | Sheet Depron Aero 1250x800x3 mm |
3 x | SkyMaxx 1.550 mm (kit) |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Release film 100 cm x 50 m |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 14x6.5 |
1 x | Propeller CFK 14x10 |
1 x | Propeller CFK 17x18 |
1 x | Propeller CFK 14x8 |
1 x | Propeller CFK 18x9 |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Propeller CFK 13x7.5 |
1 x | Propeller CFK 16x13 |
2 x | Propeller CFK 15x7 |
1 x | Propeller CFK 14x8 Slim |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
2 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | MEKP Harderner 100 g |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Servo inverter |
1 x | HITEC DPC-11 programmer |
2 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Tail gear set (60-120 class) |
1 x | CNC FPV Display screen&Transmitter Holder Vertical |
1 x | Debonder UN - CURE™ (30g) |
1 x | Extender tip (6 pcs) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | FOAM - CURE™ (24g) |
1 x | Cyano SUPER - GOLD™ (12g) |
1 x | ExtraCA Top |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Tailwheel for 20/60 size |
2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
2 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 36 mm |
1 x | Antenna holder bracket double |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
1 x | Motor OS 3820-1200 electric |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Crystal Universal RX 35.070 Ch 67 |
1 x | wire tensioner (black) |
1 x | Battery bed V2_S (black) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Wire easy tensioner (red) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Propeller RF CFK 10x17 |
1 x | Propeller CFK 15x13 Slim |
1 x | Propeller RF CFK 13x6.5 |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Spring clamp for tube Ø50 mm |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Spring Clip Ø25 mm |
1 x | Pick up DA50/100/150 |
1 x | Switch Cap L (black) |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
1 x | Switch Cap L (Red) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
2 x | Switch Cap L (silver) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Motor Mount for Multiplex FunJet |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Carbon plate 350x150x1.5 mm |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Propeller CFK 18x16 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Motor Mount for TITAN ZG38/38S/38SC, length 36 mm |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Piston ring for ZG 20 and G240RC |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Cylinder ZG 26SC/SLH |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 72 mm |
1 x | Motor Mount for TITAN ZG45 and ZG62, length 54 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | Propeller Pleg CAM Carbon 18x9 |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
1 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
1 x | SUS wire 3m (nylon coated) |
1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
1 x | Red aluminium servo arm V3-Futaba 1,0inch |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
1 x | Red aluminium double servo arm FUTABA 2,5inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
1 x | Blue aluminium double servo arm HITEC 2,5 inch M3 |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Red aluminium servo arm V3-Futaba 1,25inch M3 |
1 x | Red aluminium servo arm V3-Futaba 3,5inch |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | wire tensioner (silver) |
1 x | Wheel 38 mm V2 |
1 x | Battery bed V2_M (black) |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | 6 mm Quick clamp_S (10 pcs) |
1 x | FPV Station for SE TX-Tray V1 |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Crystal Universal RX 35.120 Ch 72 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | 25 mm gas motor standoff |
1 x | wire tensioner (red) |
1 x | wire tensioner (blue) |
1 x | 45 mm gas motor standoff |
1 x | Crystal Universal RX 35.090 Ch 69 |
1 x | 50 mm gas motor standoff |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | 15 mm gas motor standoff |
1 x | 35 mm gas motor standoff |
1 x | Wire easy tensioner (silver) |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Aluminium ignition bad (red) |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Crystal Universal TX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | 20 mm gas motor standoff |
1 x | Aluminium battery holder red |
1 x | Transmitter Stick Ends V1 Silver - M3 (2 pcs) |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Motor class 550 + "M" gearbox 2,85:1 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Race 480 |
1 x | Race 400 7,2 V |
1 x | Race 600 |
1 x | Race 650 Johnson motor 7.2v |
1 x | Motor class 400 + gearbox 1,86:1 |
1 x | Screw M4x20 (10 pcs) |
1 x | Propeller CFK 18x19 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 12.5x7 |
|
25,204.27EUR |