2 x | ABS Strip 1.0x5.0x1000 mm |
4 x | ABS Strip 1.5x3.0x1000 mm |
2 x | ABS Strip 1.0x3.0x1000 mm |
2 x | ABS Strip 1.5x4.0x1000 mm |
2 x | Strip ABS 2.0x10.0x1000 mm |
2 x | Round Rod 1,0x1000 mm |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | ABS Strip 1.0x2.0x1000 mm |
2 x | ABS Strip 1.0x4.0x1000 mm |
2 x | ABS I Strip 20x10x1000 mm |
1 x | Round Rod 6,0x1000 mm |
2 x | Round Rod 3,0x1000 mm |
4 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 1,25x1000 mm |
3 x | ABS Strip 1.5x8.0x1000 mm |
3 x | Round Rod 2,0x1000 mm |
1 x | Round Rod 5,0x1000 mm |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
2 x | Strip 3,5x1,75x330 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
2 x | ABS Strip 1.5x2.0x1000 mm |
2 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Interface Realflight Simulator |
3 x | EasyFLY Addon |
1 x | Slave-cable USB Easy Sim |
1 x | GameCommander USB Universal |
1 x | SIMtransmitter 6 Mode 2 |
1 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita 27x14x7 mm |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 140 mm rods + T patellas set for direction control |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Cable grommet 9.5 mm (4 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M4x6 |
1 x | 100 mm rods + T patellas set for direction control |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | 100 mm rods set for direction control |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | Allen wheel collar M4x4 |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | 250 mm / 16 mm Airbrakes |
1 x | Clip fixing for wing (2 pcs) |
1 x | 80 mm rods set for direction control |
2 x | 45 mm rods + T patellas set for direction control |
1 x | Allen wheel collar M3x5 |
2 x | Cable tie mounts 4.3 (4 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
3 x | Cap closure 33/23.5mm (2 uds) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
3 x | Allen wheel collar M3x3 |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Conector BEC male (10 pcs) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Connectors banna oro 4 mm (M/F) |
3 x | Pilot JAN 1/4 Saiplanes |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | 1/10 Pilot "Jimmy" |
1 x | 1/12 Pilot "Fighter" |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
2 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | 1/12 Pilot "Tom" |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Conector JR Servo male (50 pcs) |
2 x | Conector MR-60 (pareja) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | 1/10 Pilot "Jack" |
2 x | Piloto Jet "Red" 1/6 Scale |
1 x | Connector CAN 15 |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
2 x | Conector FUTABA Servo male (10 pcs) |
1 x | Bag connector 2 mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
2 x | Conector JR Servo male (10 pcs) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Horn 6/27 with M3 Bearing |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Copier 5x20 cm pcs |
1 x | Towing hook |
1 x | Motor DLE 200cc Std |
2 x | ABS I Strip 10x5x1000 mm |
1 x | Set Altimeter SHRead |
2 x | Canopy Latch |
1 x | Piloto JET 1:3,5 |
1 x | Connectors MPX male (PIN double) |
1 x | Interface Jack Adapter IKARUS |
1 x | 290x4 mm M4 shaft ship |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Snap short M2 (10 uds) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Ignition for DA-50-R, DA-60, DA-85 |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | Motor Moki S 300 cc 5 cylinders |
2 x | Locking cable tie 4.6x203 (uds) |
1 x | Reed valve for DA-60/70 |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Engine Kolm BX-155-2 with starter |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
2 x | Split M1,2x10 (10 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Dia. 20x15 mm teflon tube for escape |
1 x | DLE 30 complete electronic ignition |
1 x | 5 mm gas motor standoff |
1 x | Cer clip DA-50R, DA-60 DA-100 DA-100L DA-120, 1 piece |
1 x | Captador RCEXL para DA |
1 x | Carb Carrier, red DA-85, DA-100L and DA-120 |
1 x | Piston ring for DA-85 and DA-170 |
2 x | Snap pin for micro clevis (10 uds) |
1 x | Ball bearing 6203 DLE |
1 x | 10 mm gas motor standoff |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Canister combo DLE 111 cc |
1 x | 45 mm gas motor standoff |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Black silicone 0,25 mm² wire (25 m) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | DLE 111 Old Crankshaft keyway |
2 x | Carburator Moki S250 |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Cylinder for DA-85/170 (1 piece) |
1 x | Exhaust pipe BX 155 Right |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
2 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | Pushrod octagone 4/3 |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Baffles for Radial Moki S250/330 mm |
1 x | Canister combo DLE 170 cc |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Moki Exhaust Bend 50VT |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Lead with adhesive (2 pcs) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | DLE-55RA Ignition unit |
1 x | Baffles for Radial Moki S180/320 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Reed valve Retainer, black rubber for DA-85, DA-100L and DA-120 |
1 x | Motor Moki S 250 cc 5 cyl with autostarter |
1 x | COMFORT MOUNT ø 55 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Ball bearing 6002 DLE |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Canister combo DLE 55 cc |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | 10 mm gas motor standoff |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | SUS wire 3m (nylon coated) |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Gold antispark 5,5 mm plug |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | Connectors MPX female (PIN double) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | MPX PCB "4 Pins", 5 pieces |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | Conector XT-30 (hembra) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Propeller Pleg CAM Carbon 10x7 Reverse Rotation |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Propeller Pleg CAM Carbon 14x12 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Propeller Pleg CAM Carbon 12.5x9 |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Propeller Pleg CAM Carbon 13x8 |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | Castrol Oil TTS 1l |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Piñon motor autostarter 35cc |
1 x | One Way bearing for EME35 starkit with key |
1 x | Motor EME 60 cc |
1 x | Propeller hub EME 60cc |
1 x | One touch canopy lock |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Motor EME 35 cc |
1 x | Motor EME 70 cc with autostarter |
1 x | Pitts Mufflers EME 35 cc |
1 x | Propeller RABOESCH M4 45 mm (3 Blades pr) (Right hydropropeller) |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Piston ring for DA-150 |
1 x | SE-M Filter |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Modulo reglaje avance V3 |
1 x | Opto Gas Engine Kill Switch |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
2 x | Steel conrod DA-50R and DA-60 |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Reed valve petal for DA 60 carburator |
1 x | Avia spare blue cockpit (Top Model) |
1 x | 58 mm micro servo cover |
1 x | 11 mm wing servo holder |
1 x | Rocket D9-7 |
2 x | MPX housing with flange (4 pcs) |
2 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Propeller VESS 27A |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | 30/11-26 Zoll, 3-Blade Scale |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Rudder 107-06 |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Spare Shaft Ø6mm L:450mm M5 |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Gasket for motor DA 50-R |
1 x | EXHAUST STACK Ø 25 mm DLE 55, ZDZ 50-100B2, 3W60/120B2, ... |
1 x | Sensor Ignition RCEXL Universal |
1 x | Prop washer DA-50R/60/70 |
1 x | Stainless Steel Bend D 12x0,4mm |
1 x | Glow/Gas/Smoke/Kerosene filter |
1 x | Pendulun 27g to tank |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Vess propeller 12x7 S |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | AXI 2204 Multicopter |
1 x | Drilling-template set for Moki engines Moki S150, S180, S215, S2 |
1 x | Carburator Moki S400 |
1 x | 25 mm gas motor standoff |
1 x | Joint for DA-50 reed valv |
1 x | DA-50R motor alumine support |
1 x | COMFORT MOUNT ø 60mm |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Spring for jet needle, fits DA-60/70 |
1 x | Stainless steel silencer for DA 150/150L |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Steel cylinder screw DA50/60/100/120 |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Pushrod octagone 3/2 |
1 x | Screw for mounting plate of DA100/120 |
1 x | Reed valve for DA 50-R |
1 x | Rocket cardboard tube 50mm x 48mm x 250mm |
1 x | Rocket D3-P |
1 x | Soporte carbono MR30 (2 pcs) |
2 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
2 x | Protector Connector MPX (1 pair) |
2 x | Propeller FALCON 5-BL 24x23.5 |
2 x | Protector Connector Dean-T (1 pair) |
2 x | Connectors DEANS (T) micro |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Connectors MPX black female |
1 x | Propeller Pleg CAM Carbon 18.5x10 |
1 x | Propeller Pleg CAM Carbon 7x4 |
1 x | Spinner red 30 mm |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | Adapter 3,0 mm M8 |
1 x | XT-60 connector (male) |
1 x | MPX screwable clips (4 pcs) |
2 x | Red 3m5 mm connector holder |
1 x | XH LiPo extension lead |
1 x | 1/4 Pilot "Heidi" |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Connectors MPX black male |
1 x | Optotronix Aurora Plug |
1 x | Propeller 12x6 Falcon electric |
1 x | PIN Connector female (100 pcs) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Turbo light spinner cap white 32mm |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Connectors DEANS (T) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | MPX screwable clips (5 pcs) |
1 x | Mounting frame MPX male connector |
1 x | MPX Support (2 pcs) |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Propeller Pleg CAM Carbon 8x7 |
1 x | Propeller Pleg CAM Carbon 18.5x12 |
1 x | Propeller Pleg CAM Carbon 17x7 |
1 x | Propeller Pleg CAM Carbon 7x4.5 + Spinner |
1 x | Propeller Pleg CAM Carbon 9.5x5 |
1 x | Propeller Pleg CAM Carbon 8x6 |
1 x | Propeller Pleg CAM Carbon 6x3 + Spinner |
1 x | Spinner white 30 mm |
1 x | Adapter 3,2 mm M6 |
1 x | Adapter 4,0 mm M6 |
1 x | Connectors MPX male |
1 x | 20x15 Falcon electric V2 |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | MPX Support |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | 21x14 Falcon electric carbon prop (64 g) |
1 x | Magnetic Connect locking system |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
2 x | Connectors MPX female |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Mounting frame MPX female connector |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Gold antispark 4 mm plug |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | Propeller Pleg CAM Carbon 9x4 |
1 x | Propeller Pleg CAM Carbon 17x13 |
1 x | Propeller Pleg CAM Carbon 16x8 |
1 x | Propeller Pleg CAM Carbon 20x12 |
1 x | Propeller Pleg CAM Carbon 6x6 + Spinner |
1 x | Propeller Pleg CAM Carbon 18x9 |
1 x | Propeller Pleg CAM Carbon 18x6 |
1 x | Propeller Pleg CAM Carbon 8x4.5 |
1 x | Propeller Pleg CAM Carbon 8x4 |
1 x | Propeller Pleg CAM Carbon 6x6 |
1 x | Propeller Pleg CAM Carbon 8x5 |
1 x | Propeller Pleg CAM Carbon 17x10 |
1 x | Propeller Pleg CAM Carbon 7x4.5 |
1 x | Propeller Pleg CAM Carbon 16x6 |
1 x | Propeller Pleg CAM Carbon 18.5x14 |
1 x | Propeller Pleg CAM Carbon 7x6 M8 |
1 x | Propeller Pleg CAM Carbon 8x4.5 + Spinner |
1 x | Propeller Pleg CAM Carbon 18x13 |
1 x | Propeller Pleg CAM Carbon 8x5 M6 |
1 x | Propeller Pleg CAM Carbon 9x5 |
1 x | Propeller Pleg CAM Carbon 18x7 |
1 x | Propeller Pleg CAM Carbon 6x3 |
1 x | Propeller Pleg CAM Carbon 20x10 |
1 x | Adapter 3,2 mm M8 |
1 x | Adapter 4,0 mm M8 |
1 x | GM Propellers Spinner Scale ø 42mm Diameter, Motor shaft ø 6mm C |
1 x | Adapter 5,0 mm M8 |
1 x | Spinner white 40 mm |
1 x | Spinner black 30 mm |
1 x | Spinner negro 40 mm |
1 x | Adapter 3,0 mm M6 |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | Altimeter Altis V4 |
|
29,381.42EUR |