430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x ABS tube 5.0x4.0x156 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 3.0x2.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
2 x ABS tube 6.0x5.0x1000 mm
3 x ABS tube 9.0x7.0x1000 mm
2 x ABS tube 6.0x4.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x ABS tube 12.0x10.0x1000 mm
2 x ABS tube 4.0x3.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x ABS tube 8.0x7.0x1000 mm
2 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
2 x ABS tube 7.0x5.0x1000 mm
3 x ABS tube 2.0x1.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x ABS tube 7.0x6.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
3 x ABS tube 18.0x16.0x1000 mm
1 x Connectors banna oro 2 mm (M/F)
2 x XH male balance (5S) connector (2 pcs)
1 x 1/6 Pilot "Buddy"
1 x Pilot "Dick" Legends Series (Slimline)
1 x 1/12 Pilot "Cougar"
1 x Gold antispark 4 mm plug
2 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 3 mm (M/F)
1 x Piloto Jet "Red" 1/6 Scale
1 x 1/6 Pilot "Tony"
2 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Gold antispark 5,5 mm plug
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 4 mm (M/F)
2 x Conector BEC female (10 pcs)
1 x MPX Sub-D Adaptor
1 x 1/7 Pilot "Japanese"
2 x Connectors banna oro 3,5 mm (M/F)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
2 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x 2 mm male connector (2 pcs) with safety connector
1 x 1/12 Pilot "Tom"
1 x 1/4 Pilot "Heidi"
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x XH male balance (4S) connector (2 pcs)
2 x Pilot JAN 1/4 Saiplanes
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x XH female balance (5S) connector (2 pcs)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Optotronix Aurora Plug
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x SE Ring 480 mm (2 pcs)
2 x Ring 320 mm length (5 pcs)
1 x ABS tube 3.0x2.0x330 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Foil for sticking flaps and ailerons
1 x SE Ring 330 mm (4 pcs)
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Tape GFK 50 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 450 mm (2 pcs)
1 x Ferrita con funda
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x 10m servo "Premium" wire (white/red/blue)
2 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
2 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x 100m servo "Premium" wire (white/red/blue)
1 x Silicone red 0,25 mm² wire (25 m)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x 5 line servos wire black (1 m)
1 x PVC 0,08 qmm Graupner servos wire (5 m)
2 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x White silicone 0,25 qmm wire (150 m)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
1 x JR silicone servo wire 0,35 qmm / 5m
2 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x White silicone 0,25 qmm wire (100 m)
1 x Starter Sullivan-STAR 603 DINATRON
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 
1 x 
1 x Starter Sullivan-STAR 601
1 x Screwdriver for Hexagon 1,27mm
1 x 3,0x60 mm allen screwdriver
1 x 2,5x60 mm allen screwdriver
1 x 1,5x50 mm allen screwdriver
1 x Starter 12v (Max 90 and 15ccm)
2 x Z Bender - S Type Tool
2 x Screwdriver for Torx® TX6
1 x 2,0x50 mm allen screwdriver
1 x Hot Glue Stick GREEN
1 x Crimping tool
2 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Starter EM Gear Power 250
1 x Vacuum pump 12 CFM
1 x Ball Link Plier
1 x Crimping tool
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Extension 7.5 cm
1 x Actuador lineal HLS12-100210-7.4v
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Protector Connector Dean-T (1 pair)
1 x Piloto Jet "Green" 1/6 Scale
1 x 1/10 Pilot "Jimmy"
1 x Red 3m5 mm connector holder
1 x 1/6 Pilot "Garry"
1 x Wing connector 8pin with pin strip, plug & socket
1 x 30 cm DEANS female connector
1 x Conector XT-30 (macho)
1 x 1/6 Pilot "Cindy"
1 x Conector Servo female 4 pines
1 x XH male balance (3S) connector (2 pcs)
1 x Conector XT-30 (hembra)
1 x MR30 connector female
1 x XH female balance (2S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
2 x Ferrita 14x8x5.5 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x ABS tube 5.0x4.0x1000 mm
1 x 1/12 Pilot "Langley"
1 x Fiberglass tube 6/4x1000mm
1 x ABS tube 3.0x1.0x1000 mm
1 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x Glass Bubbles (0,12 g) 350 ml
1 x Cotton Flocks, bag/ 500 g
2 x Ferrita 27x14x7 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x TX 250 mW especial GOPRO
2 x SE Ring 250 mm (2 pcs)
2 x SE Ring 350 mm (2 pcs)
1 x Ferrita 17x10x6.5 mm
2 x SE Ring 300 mm (2 pcs)
1 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x PVC termo-retract battery 95 mm blue transparent (1 m)
1 x Oratex Silver 2m
1 x PVC transparent red battery termo-retract 68 mm (10 m)
1 x Oratex Red Fokker 10 m
1 x Oracover Yellow CADMIO 2 m
1 x PVC blue transparent battery termo-retract 68 mm (10 m)
1 x Oratex Natural White 20m
1 x Oratex Natural White 2m
1 x Extractor piñones 2.3/3.2 mm
1 x Hovercraft sailcloth
1 x Micro Crystal RX 35.120 Ch 72
1 x EasyFLY Addon
1 x Spikes Band (5 m)
1 x 
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
2 x 1 m servo "Premium" wire (white/red/blue)
1 x Silicone black 0,75 qmm cable ( 1 m)
1 x Yellow silicone 0,5 qmm wire (50 m)
1 x Tachometer HANGAR 9 digital
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x Z Bender - S Type Tool
1 x Green silicone 0,25 qmm wire (50 m)
1 x Welder 100W/200V
1 x Propeller diller 5/6,3/8/9
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Cable set PREMIUM, fuselage/wing
1 x Heli blades angle measurer
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x Extension MPX-MPX 20 cm
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Green silicone 0,25 mm² wire (25 m)
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x PVC red battery termo-retract 68 mm (10 m)
1 x Oracover Yellow CUB 10 m
1 x PVC transparent battery termo-retract 70 mm (10 m)
1 x Oracover Yellow CADMIO 10 m
1 x SIG Coverall 1.2x1.8 m
1 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x Servo NARO Max Std
1 x Jet Pipe for ULTIMATUM 2m
1 x Bags de Luxe ULTIMATUM 2.0
1 x Tren de cola carbono 50-70cc
1 x Battery charging cable XT60
1 x Shaft for A60-XS-V2 (112,5mm)
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Conector JR Servo male (10 pcs)
13,026.58EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies