2 x | Locking cable tie 2.5x100 (uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Locking cable tie 3.2x142 (uds) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Screw-lock connector M2 (2 uds) |
2 x | Small aluminium horn red (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
2 x | Horn 5/15 with M2 Bearing |
1 x | Horn 5/20 with M2 Bearing |
1 x | Cable with accesories |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | Horn 6/27 with M3 Bearing |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | ABS tube 8.0x6.0x1000 mm |
3 x | ABS tube 18.0x16.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
2 x | ABS tube 16.0x14.0x1000 mm |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Brass control horn M2 short for wire (2 pcs) |
2 x | SlowFlyer control horn (3 pcs) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | ABS tube 9.0x8.0x1000 mm |
2 x | ABS tube 6.0x4.0x1000 mm |
3 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | 6 mm aluminium horn with patella |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
3 x | ABS tube 5.0x4.0x156 mm |
1 x | Stickers-digit for marking |
2 x | Horn with ball 55x40 |
1 x | Small aluminium horn gold (2pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | RH long aluminium horn (2pcs) |
1 x | Horn for flap control (1 pcs) |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | WingFix ULTRA Black Edition |
1 x | Servo NARO Max Std |
1 x | Xplorer4 anemometro |
1 x | Xplorer3 anemometro |
1 x | Xplorer1 anemometro |
1 x | Angle measurer |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Field folding model stand SebArt |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Surface Indicator Gauge Small |
2 x | Xplorer2 anemometro |
1 x | Propeller balancer |
1 x | Medidor ángulos y/o incidencias |
5 x | TP/TopFuel - JST-EH 4/5S Adapter |
3 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Adapter lead MPX/EC3 |
3 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
4 x | Copper lacquer wire Ø0,2 mm (5 m) |
3 x | TP/TopFuel - XH 2/3S Adapter |
2 x | USB HLS prog. interface |
3 x | CC 01 |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
2 x | 30 cm BEC cable (male) |
2 x | BEC 3A FOXY |
3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | CC 05 |
2 x | MPX-Dean "T" Adapter |
2 x | CM-3 |
3 x | 2 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Circlick securite |
3 x | CC 03 |
2 x | Adapter lead MPX/XT60 |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Cockpit aluminium closing 4.7g |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Canopy Latch |
1 x | Cockpit plastic closing |
1 x | Cockpit latch closing I=10 mm |
2 x | Recessed MPX connector support (6 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | One touch canopy lock |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
3 x | Snap pin for micro clevis (10 uds) |
1 x | 100 mm rods set for direction control |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | ABS tube 8.0x7.0x1000 mm |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Multi-adapter balancer JST - TP |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Servo slow down unit (0,7-14,7 sec ) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Pushrod octagone 3/2 |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | 80 mm rods set for direction control |
2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
2 x | Fiberglass tube 6/4x1000mm |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Long adjustable control horn with bearing |
1 x | Micro control horn (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
3 x | TrainerCord (master-learner) |
1 x | Opto Gas Engine Kill Switch |
2 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | MPS Gas-Cap-Powerswitch |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | SPS 70V 100/200 A |
1 x | MAX BEC 2 |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Extension 6 lipos XH > EH |
2 x | SBEC 40 |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | 2.5 inch aluminium core wheel (1 pcs) |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Opto Gas Engine Kill Switch |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Cable Cargador FUTABA |
1 x | PSC 5 |
1 x | Interruptor RX/Batterie |
1 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Wheel 28 mm |
1 x | Wheel 18 mm |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | 60x25 mm tail wheel "type F3A" |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | 5 mm Prop Adapter M6 |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Tape GFK 38 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Marker ties (20 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | SPS 70V 140/280 A |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | SBEC 30 D |
1 x | Long Switch On/Off micro |
1 x | DPSI magnetic switch actuator (housing) |
2 x | ABS tube 2.0x1.0x1000 mm |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Propeller APC 11x8.5 Electric |
2 x | Propeller APC 10x5 Electric |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Spinner plastic white fixed propeller 30 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20x200 mm battery rings |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | |
1 x | MAX BEC 2D plus EX |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Conector MT-60 (pair) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Horn 6/35 with M3 Bearing |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Horn with ball 40x30 |
1 x | Motor OS 3820-1200 electric |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
1 x | Spinner plastic white fixed propeller 42 mm |
1 x | 4 LiPo XH>EH adapter |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Avanti S 2.3m Jet WHITE/BLUE & retract (SebArt) |
1 x | Propeller APC 10x7 SF |
1 x | Hopper UAT Sebar 600 ml |
1 x | Wings carryng bags 50 class (SebART) |
1 x | Propeller APC 11x7 Electric |
1 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 10x4.5 MR |
2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | JETImodel SINGLE BEC |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (female) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | LO 100 ARC 3.3m |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
2 x | X-RAY Micro QR |
1 x | E-FUN BUG (ROI-Import) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Dean "T" - Futaba Adapter |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | CC 02 |
1 x | Canopy Sweet / Siesta |
1 x | X-RAY Micro QR (Rudder) |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | ASH 31 Mi Scale:1/3 - 7m |
1 x | Carbon plate 350x150x1.0 mm |
2 x | X-RAY Micro QR (Elevator) |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | Fox MDM-1 ARF 3.5m Orange |
1 x | ASH 31 Mi Scale:1/3 - 7m, elevator |
1 x | Chili F3K 2 wing servo mounted |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
1 x | Fournier RF-4D |
1 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | LUNAK 4,00 m |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | FOX MDM-1 3.500 mm ARF White |
2 x | X-RAY Micro QR (Tail Tube) |
|
32,127.31EUR |