2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Adjustable launching hook |
3 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Towing hook <3m |
3 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
2 x | Tow hook for tug |
1 x | Towing hook |
2 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
3 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
3 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
3 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Towing hook |
1 x | Fixed launching hook |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Cable control set |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Cable with accesories |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Small aluminium horn red (2pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Cap Hispano Aviación |
2 x | Glases Nimbus |
1 x | Glases Ace |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Glases Aspen |
2 x | Glases Moritz |
1 x | DYNAMOMETER S-1580 |
1 x | Optical RPM Sensor |
1 x | Hovercraft sailcloth |
2 x | |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Interface Jack Adapter IKARUS |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Support Filtro FESTO |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | PVC grid straight 290x185x0.32 mm |
2 x | Styrene plate 320x120x1.0 mm |
4 x | Foam plastic plates (310x210x3 mm) |
2 x | Teflon rollers 80 mm x 15 mm Diam. |
2 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Long horn 50x26 |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Horn mando small (2 pcs) |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | LOWER TOW HOOK |
1 x | Glases Nimbus "Black" |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Glases Stratus |
1 x | Gates hinge |
1 x | AXI 2204 Multicopter |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
2 x | Miniature brass strap hinge, 1 m |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
2 x | Large flex hinge (12 uds) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Fiberglass plate 620x540x2,0 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Fiberglass motor-holder for electric motors |
1 x | Size "M" motor holder for class 400 |
1 x | Size "M" motor holder for class 400 |
1 x | Program card KAVAN PRO |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | Frontal support Speed 400/480 |
1 x | |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | Futaba 54 mm servo arm with ball link |
1 x | PYRO 700-45 |
1 x | PYRO 800-48 Long Axi |
1 x | Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish |
3 x | Fiberglass plate 620x540x0,2 mm |
2 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
2 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
3 x | Fiberglass plate 350x150x3.0 mm |
3 x | Fiberglass plate 620x540x3,2 mm |
1 x | Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl |
2 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
2 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Fiberglass plate 350x150x0.3 mm |
2 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
2 x | Fiberglass plate 350x150x2.0 mm |
2 x | Foam plastic plates (310x210x2 mm) |
3 x | Foam plastic plates (310x210x5 mm) |
2 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
2 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Fiberglass plate 350x150x2.5 mm |
2 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
2 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Release film 100 cm x 50 m |
2 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
3 x | Carbon plate 550x350x2.5 mm ECOTECH |
3 x | Fiberglass plate 350x150x1.0 mm |
2 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Film release agent PVA 25 ml |
2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
2 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
2 x | Fiberglass plate 620x540x0,3 mm |
2 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Fiberglass plate 350x150x0.5 mm |
2 x | Fiberglass plate 350x150x4.0 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Frontal support Speed 280 |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Motor mount for 1200 mm models |
1 x | Cooler motor type 150 |
2 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | Fiberglass motor-holder for electric motors |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Central support Speed 600 |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
2 x | Buy Perforated film 100 cm / 10 m |
1 x | Receiver bed (Blue) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | KIRA 480-43 5,2:1 |
1 x | Motor A30-12 XL Glider |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Hitec 46 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 |
1 x | Motor A10-7 L 4,4:1 |
1 x | PYRO 600-11 |
1 x | KIRA 480-38 5,2:1 |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | KIRA 600-20 |
3 x | Pin hinge 34x16 mm (10 uds) |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Futaba 52 mm servo arm |
2 x | Charger SKY RC e680 |
1 x | KIRA 480-31 5,2:1 |
1 x | PYRO 800-40 Long Axi |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | PYRO 600-12 |
1 x | BETA 1400 ARF Red |
1 x | BETA 1400 RTF Red |
1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | Suncover 100cc Red |
1 x | Motor A20-22 L EVO |
1 x | Hitec 20 mm servo arm |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Horns indoor |
2 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
2 x | Small flex hinge (12 uds) |
1 x | Flap hinge (6 pcs) |
1 x | Propeller APC 12x8 Electric |
1 x | Propeller APC 12x6 Electric |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Propeller APC 13x6.5 Electric |
1 x | Propeller APC 12x6 SF |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
3 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Chopped glass fibre strands 3 mm |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Small pinned hinge (12 uds) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 12x8 SF |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Motor A30-12 L V4 |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Antonov AN2 Scale 1/6 - 3m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | A40-10S V2 8-Pole + 6,7:1 PG |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | Adaptadores carga 6s JST-XH |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | Mini Infrared Thermomiter |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | PET film Mylar® A 350, 50 cm, roll/ 2 m |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Axle for motor A30-XL V2 |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Backmountset complete A40 |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | A60-6XS V4 28-Pole |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | SF260 SIAI MARCHETTI 50E yellow/black (SebArt) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | ESC ALPHA 60A HV |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Ciano KAVAN Medium 20g |
2 x | Motor OS 3820-1200 electric |
1 x | Combo KAVAN C3536-1250 + KAVANA R50SB + |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Motor A20-26 M EVO |
1 x | Motor A30-14 L V4 |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Carbon plate 350x150x4.0 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Motor A50-14 L 8-Polos Electric turbine |
1 x | Carbon plate 350x150x0.5 mm |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
2 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Ciano KAVAN Thin 20g |
1 x | Engine mounts for .09 - .19 engine |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Axle for motor A20-S (3 uds) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Glow starter with charger 230v |
1 x | Conector MT-60 (pair) |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Motor A50-12 L Glider |
1 x | |
2 x | ABS 500 x 400 x 1 mm (white) |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Shaft for A60-L (140mm) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Glass fibre sleeve Ø 20 mm X 20m |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Panel Honeycom carbon 350x150x3.5mm |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Coupling bush 5 - 5 mm |
1 x | Propeller G-Sonic 20x8 |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | Foreman, scale 1:32 |
1 x | MZ-10, 5 Channel HoTT |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
|
32,922.71EUR |