149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]


DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x PowerFuel RX V2 Fuel Pump
3 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Giant Scale Muffler D.A. 70
1 x Magnetic Connect locking system
2 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Spring Clip Ø25 mm
1 x Battery EMCOTEC LiIon 3000 7.2v
1 x DPSI Ampere & Voltage bundle
1 x DPSI OCP Overload protection
2 x EWC3 40 cm wing connector
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x wing/fuselage connector for 16 pines AWG 20-24
2 x MPX Sub-D Adaptor
2 x Compact Pitts Muffler OS MAX.35.40 FP
2 x Wing connector 8pin with pin strip, plug & socket
1 x Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x Heat sink for Optotronix LEDs
1 x DPSI Micro MPS
1 x O-ring Saito FG-73 5cyl
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Pitts Muffler kit for CAP 21
1 x Junta humo metalica G35 DLE35
1 x DPSI 2001 RV
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x Optotronix Aurora Plug
3 x OPTOTRONIX Aurora LCU
2 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x DPSI RV Mini 5 (2008)
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Y-Hose connector 4-4-4mm
1 x DPSI magnetic switch actuator (housing)
1 x DPSI magnetic switch actuator (PCB)
1 x Combo lighting module with covering drop shape
2 x Distanzstück motor OS 120 AX
1 x DPSI Ampere battery backer
3 x wing/fuselage connector for 3 pines AWG 20-24
1 x Fuel Dot (RED)
1 x Vest clothes Hispano Aviación
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x Battery LiPo GENS 4000 mAh 2S 7,4v RX (Gens Ace)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x Battery LiPo GENS 5300 mAh 4S 14.8V 30C (Gens Ace)
2 x wing/fuselage connector for 12 pines AWG 20-24
1 x DPSI LR-S (with push buttons)
1 x LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG
2 x Red smoke canister 140 g
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x BALSA trip 3.0x3.0x1000 mm
2 x 3l Smoke oil
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG
1 x Locking cable tie 4.6x203 (uds)
1 x LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Battery LiPo GENS 2200 mAh 3S 11.1v 45C (Gens Ace)
1 x Cable S.BUS 3 salidas 100 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Lipo KAVAN 2200 mAh 11.1v 40/80C
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Cockpit plastic closing
1 x Battery LiPo GENS 5000 mAh 6S 22.2v 45C (Gens Ace)
1 x Oracover Green10 m
1 x Extension silicon 10 cm (Futaba)
1 x Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case)
1 x Sanyo RX Battery Eneloop 6,0 V Futaba
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace)
1 x Lipo RAY 2200 mAh 2s 7.4v 30C
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x LOWER TOW HOOK
1 x ABS tube 7.0x5.0x1000 mm
1 x USB Mini Camera endoscope
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x White 2,4 GHz antenna exit guides (2 pcs)
2 x Servo-V-Limiter 5.2V
2 x Universal batery Tester
3 x Optotronix X-Carrier
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Stick coupler Ms 15 mm
1 x 3,2 mm Prop Adapter M6
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x EDGE 540-A 105" (2660 mm)
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x BULLIT Wing 1095 mm
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x BULLIT Wing 840 mm
1 x SLICK 360-A 104" (2640 mm)
1 x BOOMERANG II 40/46 ARF 1.55mm
2 x Tube mounting clamps
1 x SPS Remote switch actuator
1 x MPX screwable clips (4 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x Pins M connect Multipin connectors AWG 20-24
3 x Smoke Dot (Red)
1 x Switch magnet for gas cap and magnet switch actuators
1 x Landing lights 18 mm (0.71in)
1 x La Capitania di Venetia accesories
1 x 5 mm Prop Adapter M6
1 x 3,2 mm Prop Adapter M8
1 x Aero-Master Cabine (Aero-naut)
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Aero-Master Fuselage (Aero-naut)
1 x Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x Servo KST X08H V5.0 HV DIGITAL Wing servo 8mm
1 x Servo KST DS125MG servo ala 10mm 28g 7Kg
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x aluminium servo arm V1-JR 1,0 inch M2
1 x Gold aluminium servo arm V1-JR 1,25" inch M3
1 x Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm
1 x Red aluminium servo arm V3-Futaba 1,0inch
1 x Red aluminium servo arm V2-Futaba 1,75" inch M3
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x 3,9 mm ZG20-ZG38 servo arm
1 x Resistor 3W 5% OR82
1 x PowerBox iGyro SRS + GPS Modul
1 x White smoke canister 140 g
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x AX-60 starters (5 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Parachute expulsion foam
1 x One touch canopy lock
2 x Red smoke canister 65 g
1 x Black smoke bombs AX-60 (5 pcs)
1 x PowerBox Competition
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Glases Flitemaster
1 x Parachutist
1 x Silicone red 0,75 qmm wire ( 1 m)
1 x Silicone red 1,0 qmm wire (100 m)
1 x Charging Extension 50cm for 2 Battery
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Combo lighting module with covering drop shape
1 x Gold aluminium servo arm V2-JR 1,25" inch M3
1 x LA500 Autogyro
1 x Head spacer
1 x LA500 rotor head core
1 x LA500 Blades
1 x Cierva C30 Elevator
1 x Balls 4 mm
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x BALSA trip 5.0x5.0x1000 mm
1 x Covered closure or fairings
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Initior Receiver FRX2 Wireless
1 x Extension for LC-Display 50cm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Smoke set "M"
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x PowerBox 12
1 x PowerBox MagSensor black connector SRS/Champion
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Extension for SensorSwitch 30cm
1 x Blue smoke canister 140 g
1 x BALSA leading edge 8x10x1000 mm
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Silicone red 2,5 qmm wire ( 1 m)
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x Canopy Latch
1 x 19 mm 2:1 black termoretract tube
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Red smoke canister 100 g
1 x "S" set for planes
1 x White smoke canister 100 g
1 x BALSA trip 8.0x8.0x1000 mm
1 x 2 piece mounting frame Battery 3200 / 4000
1 x Remote electric ignition system
1 x PowerBox Competition SR2
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x PowerBox Evo
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x PowerBox iGyro 3xtra
1 x PowerBox iGyro SAT
1 x PowerBox MagSensor red connector
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Green smoke canister 140 g
1 x Green smoke canister 65 g
1 x Aluminun wheel collar 3 mm Ø (4 uds)
2 x Extractor piñones 2.3/3.2 mm
20,298.35EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies