109.00EUR

GRE-18 RTR Crawler 1:18 Blue
[KAV06GRE18B]


Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension silicon 30 cm female (Futaba)
1 x Premium servo extension 25cm
1 x Xplorer4 anemometro
1 x Extension silicon 35 cm male (Futaba)
2 x Xplorer2 anemometro
1 x Cable S.BUS 3 salidas 100 mm
2 x ABS tube 8.0x6.0x1000 mm
1 x 200 mm extensión servo HITEC/JR
1 x Extension silicon 100 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x ABS tube 7.0x5.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Cable S.BUS 3 salidas 300 mm
2 x ABS tube 3.0x1.0x1000 mm
2 x ABS tube 4.0x2.0x1000 mm
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 100 cm (Graupner)
2 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
2 x Xplorer1 anemometro
2 x ABS tube 18.0x16.0x1000 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
3 x ABS tube 3.0x2.0x1000 mm
1 x Extension silicon 30 cm female (Graupner)
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Prolongador S-Bus JR/JR 10cm
2 x ABS tube 7.0x6.0x1000 mm
1 x Extension lead 15 cm Multiplex
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 20.0x18.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
2 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x ABS tube 5.0x4.0x156 mm
2 x Extension 100 cm (Futaba)
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Xplorer3 anemometro
1 x Extension silicon 10 cm (Futaba)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x Cabel "Y" 15 cm
1 x CF tube set (Ø 38 mm y Ø 14 mm)
2 x ABS tube 5.0x3.0x1000 mm
2 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
2 x 1/12 Pilot "Langley"
2 x Piloto JET 1:3,5
1 x Piloto jet 130 mm
1 x 1/6 Pilot "Garry"
1 x 1/10 Pilot "Jimmy"
1 x Pilot "Duke" Legends Series (Slimline)
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Civilian pilot "Gramps" size 9cm (Slimline)
3 x 1/6 Pilot "Buddy"
1 x Digital precision scale up to 2000 g
1 x Baseplate servo
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Oils Pumps Empty (1 liter)
1 x Ball link Aluminio M3 (2 pcs)
1 x Hot Glue Stick RED
1 x AC-10 pre-rotacion with motor
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Starter 12v (Max 180 and 30ccm)
2 x Ferrita 14x8x5.5 mm
2 x Ferrita con funda
1 x Small aluminium horn gold (2pcs)
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Extension silicon 75 cm (Futaba)
1 x Extension PVC 150 cm (Graupner)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x ABS tube 12.0x10.0x1000 mm
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support FUEL DOT V3
1 x Extension 15 cm (Futaba)
1 x Support pumb/filter Xicoy X45
1 x Support Filtro FESTO
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Motor A2212/13T
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x ABS tube 3.0x2.0x330 mm
1 x Cabel "Y" 30 cm (graupner)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
2 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x ABS 500 x 400 x 0,5 mm (white)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x ABS 500 x 400 x 1,5 mm (white)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x Glass fabric 425 g/m² aero,10x1m
1 x Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x Glass fabric 49 g/m² (1,27 x 5 m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x PVC grid straight 290x185x0.32 mm
1 x Extension 90 cm (Futaba)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
2 x Teflon rollers 40 mm x 15 mm Diam.
1 x Circlick securite
2 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
2 x Glass fabric 49 g/m² (1,27 x 20 m)
1 x Vacuum bag, 1200 mm x 50 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x Release film 100 cm x 50 m
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Premium servo extension 50cm
1 x 20 mm carbon horn
1 x 102 mm aluminium spinner
1 x Carbon plate 350x150x1.5 mm
1 x Carbon plate 350x150x0.5 mm
1 x 120x60 mm SLH KOVO wheel
2 x Carbon plate 550x350x1.0 mm ECOTECH
1 x Balsa panel 3.0x100x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x 110x55 mm C SLH KOVO wheel
1 x Bags de Luxe ASPIRE
1 x BALSA trip 2.0x2.0x1000 mm
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Servo HITEC HS-311
1 x Gear set HITEC HS-645MG/5645MG/5685MH
1 x Servo HITEC D-955 TW Titanium
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
1 x Gear set HITEC HS-56 HB
1 x Servo HITEC D950 TW
1 x Servo Digital HITEC HS-5065 MG
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Gear set HITEC HS-85
1 x Servo HITEC D145 SW
1 x Servo HITEC D951 TW
2 x Servo HITEC HS-45 HB
1 x Gear set HITEC HS205/225MG/5245MG/7245MH
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Z-shaped servo mount
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x L-shaped servo mount
1 x Screws set for Hitec MG arms servo
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x Carbon plate 350x150x2.5 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x Balsa panel 1.0x100x1000 mm
1 x 
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x Ball Link Plier
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pilot "Goose" (Slimline)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Bateria LRP 2200-7.2v 6 cell NiMH
1 x 1/6 Pilot "Cindy"
1 x Balsa panel 4.0x100x1000 mm
1 x Cockpit aluminium closing
1 x Balsa panel 10x100x1000 mm
1 x 1/6 Pilot "John"
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x 280 cc gasoline fuel tank complet
1 x 102x26 Ø6.0 mm aluminium core wheel
1 x 1000 cc gasoline fuel tank complet
1 x 1/4 Pilot "Heidi"
1 x 102 mm INO spinner (carbon imitation)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon plate 350x150x3.0 mm
1 x EDGE 540-A 91" (2310 mm)
1 x Foam plastic plates (310x210x2 mm)
1 x KingTech K100TP G4+ Turboprop
1 x Cooler motor type 150
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Turbine MAMMOTH 25.4 Kg
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x Servo HITEC HS-5685MH
1 x Servo SAVOX SA-128S SG
1 x Charger ISDT 608AC 200W
1 x Glass fabric 25 g/m² (1 m²)
1 x EDGE 540-A 74" (1880 mm)
1 x Turbina KINGTECH K70G4
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Film release agent PVA 25 ml
1 x Sheet Depron Aero 1250x800x3 mm
1 x Cables suitable for the motor AC 28/7
1 x Styrene plate 320x120x0.5 mm
1 x Burner Plug K30/ K45
1 x Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x Cooler motor type 300
1 x Size "M" motor holder for class 400
1 x Fiberglass plate 350x150x1.5 mm
1 x Foam plastic plates (310x210x3 mm)
1 x KingTech K45TP G4 Turboprop
1 x Fiberglass plate 350x150x2.5 mm
1 x Fiberglass plate 350x150x3.0 mm
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Ø 40 mm fiberglass motor-holder for electric motors
23,663.14EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies