2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Hot Glue Stick BLACK |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Vacuum pump 12 CFM |
1 x | Hot Glue Stick RED |
1 x | Ferrita 14x8x5.5 mm |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Straightened threaded rod M3 - 1m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | 3 mm Leader (L 100 mm) |
1 x | Remote electric ignition system |
1 x | LOWER TOW HOOK |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | 3 mm Prop Adapter M6 |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | CA Glue fast 20g |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | 2,5x60 mm allen screwdriver |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Screwdriver for Torx® TX8 |
2 x | Z Bender - S Type Tool |
1 x | Copier 5x20 cm pcs |
1 x | Copier 2x20 cm pcs |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | 3,0x60 mm allen screwdriver |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 1/10 Pilot "Jimmy" |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Cockpit plastic closing |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Green smoke canister 140 g |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Yellow smoke canister 140 g |
1 x | 3 mm Prop Adapter M6 |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | PCARD Wireless System |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Ventral support for AX-18/AX-60 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Smoke set "Glider" |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Propeller POWER-PROP 13x9 |
1 x | Linden wood slat 3.0x3.0x1000 mm |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
2 x | |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Crimping tool |
1 x | Starter Sullivan-STAR 601 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Starter EM Gear Power 80 |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Crimping tool |
1 x | 2,0x50 mm allen screwdriver |
1 x | Starter EM Gear Power 250 |
1 x | Digital scale up to 40 kg |
1 x | Cut tube |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Hot Glue Stick GREEN |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Z Bender - S Type Tool |
1 x | |
1 x | Ball Link Plier |
1 x | Ball Link Plier |
1 x | Screwdriver for Torx® TX6 |
1 x | Dust collector for mould cleaning |
1 x | 1,5x50 mm allen screwdriver |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | USB Mini Camera endoscope |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Xplorer4 anemometro |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | 2 LiPo XH>EH adapter |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | AC-10 pre-rotacion with motor |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Gold antispark 4 mm plug |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Support FUEL DOT V3 |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | 10m servo "Premium" wire (white/red/blue) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Support ECU Xicoy X-45 |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Xplorer3 anemometro |
1 x | Oils Pumps Empty (1 liter) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Pilot "Anthony" (Slimline) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Xplorer2 anemometro |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Support XT60 conector (2 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | 30 cm DEANS female connector |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Ferrita con funda |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Straightened threaded rod M2-1m |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 1/12 Pilot "Tom" |
1 x | 1/10 Pilot "Jack" |
1 x | Piloto JET 1:3,5 |
1 x | Threaded coupler M3 (10 uds) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Conector Servo female 4 pines |
1 x | SUS wire 3m (nylon coated) |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Propeller 9x7 SlowFlyer |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Blue smoke canister 140 g |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
|
7,641.12EUR |