440.00EUR

Jun-Si iCharger 4010 Duo
[ROIJS137172]



Cargador iCharger 4010 Duo

Contenido del Kit
Product description:
The Jun-si iCharger 4010 Duo is a handy universal charger which can be used for charging and uncharging NiMH, LiPo, LiIo as well as LiFe and lead batteries.

Especially suitable for lithium cells. Necessary balancers are integrated.

Delivery contains Jun-Si iCharger 4010 Duo, 2 balancer conversion boards (Align/Dualsky system), 2 connection cables for balancer conversion boards, 2 charging cables, driver CD, USB cable, connection cable power supply and German operating manual.

Specifications:
- Input voltage: 9.0 V - 50.0 V DC
- Max. input current: 65.0 A
- Battery types: LiPo, LiIo, LiFe, NiCd, NiMH
- Charging wattage: 1,400 W each output with min. 23.5 V input voltage, 2,000W in synchronous mode
- Charging current: 40.0 A each output, 70.0 A in synchronous mode
- Discharging wattage: 130 W each output, 200 W in synchronous mode
- External discharging wattage: 1,600 W each output, 3,200W in synchronous mode over external discharging resistors
- Energetic recovery wattage: 1,400 W each output, 2,000 W in synchronous mode
- Balancer current: 1.2 A each output, 2.4 A in synchronous mode
- Cutoff method: Delta-Peak method for NiCd and NiMH batteries, constant current/constant voltage for Lithium and Pb batteries
- Display: Color TFT display
- PC link: USB port
- Storage medium: SD card
- Weight: 1,470 g (51.85 oz)
- Dimensions approx. : 210x140x80 mm (8.27x5.51x3.15 in)


Features:
- Progressive converter technology (buck-boost DC/DC converter) for high efficiency
- Very high charging wattage for up to 2,000 W
- Charging currents up to 40 A each output, with coupled charging outputs even up to 70 A
- Up to 10 cells of LiPo, LiIo and LiFe can be charged and discharged on each output. The voltages are balanced with a high balancer current of 1.2 A considering the internal resistance.
- RPM regulated van control
- Over temperature protection
- Saving of up to 64 data sets and import/export from/to SD card
- Display of all important data via color display: Current, voltage, wattage, capacity, internal cell resistance, battery temperature, charger status
- Different descharging modes: Normal and regenerative discharging, high current descharging with external resistor - Detection of single cells' internal resistance as well as battery pack's internal resistance
- Mulitple safety features for secure operating: Input and output polarity protection, current and voltage protection, battery over temperature protection, protection of over capacity




Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Blade Holder Full (3 blades)
1 x 4 blades set
1 x LA500 rotor head core
1 x 4 mm M3 red control terminal (4 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Gold antispark 5,5 mm plug
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x 25 mm reinforced hinge
2 x SIMtransmitter 6 Mode 2
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Smoke set "Glider"
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Socket head long ball link M3 (2 uds)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 
1 x Tape GFK 38 mm
1 x Ball link M3 (10 pcs)
1 x Initior Transmitter FTX2 Wireless
1 x Long ball link M3 (6 uds)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Initior Receiver FRX2 Wireless
1 x SE Ring 330 mm (4 pcs)
2 x AX-60 starters (5 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Tape GFK 50 mm
1 x Tape GFK 25 mm
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Green smoke canister 140 g
2 x Sun Cover PC 21 XXL (JMB Jets)
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x APM2.6 Power module with 5.3V DC BEC
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Connector Sub-D 2+5 Male
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Oracover Black 10 m
2 x Carbon fiber rod 16 mm x 1000 mm
1 x Support Flush MPX Conector (6 pcs)
1 x Glases Innovation Plus
1 x Extension 100 cm (Futaba)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x ABS "T" angle 10.0x10.0x1000 mm
2 x Futaba Female 40 cm extension
1 x Cabling for Fox MDM1 wings
2 x Servo Controller Fibra optica
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Propeller diller for DLE111 and DA85-150
1 x DLA 116 crankshaft
1 x GLOW 2C + accesories
1 x GLOW 5C + accesories
2 x Opto Gas Engine Kill Switch
1 x Quick hose connector 6-4 mm
1 x T-Hose connector 3-3-3 mm
1 x Gasket electric Fuel Pump
2 x Electric Fuel Pump 12V
1 x Y-Hose connector 4-4-4mm
1 x T- Fittings blue color (2pcs)
1 x 1000 ccm complete gasoline fuel tank
1 x FESTO connector M7 Quick 4 mm
1 x Conector FESTO M3 Quick 3mm 90º
1 x Electric Fuel pump
1 x Fuel tank 1500ml (50oz)
1 x Conector FESTO G1/8 Quick 4mm 90º
2 x Fuselage Autogyro RAINBOW
1 x Hexagonal Nut M4 (10 pcs)
2 x 3 blades set
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Extension silicon 30 cm female (Futaba)
2 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Adaptador USB - YGE
1 x Cabel "Y" 15 cm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Futaba Female 40 cm extension
2 x Interface Realflight Simulator
1 x Tube Pitot to PIXHAWK
1 x PIX Hawk with accesories
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Motor Scorpion HKIII 4035-560 Kv
2 x Jeti Black cap
1 x 800TVL CMOS camera for FPV
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x PPM Encoder Module
1 x Servo NARO Max Std
1 x MPX PCB "Gender-Changer (5 pcs)
2 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Power supply NT 40 Amp.
1 x Optical RPM Sensor
1 x HITEC Power Supply 30A. Max. 540w
1 x LightBox SR
1 x Motor OS 3820-1200 electric
1 x Motor OS 3805-1200 electric
1 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x cable TexY
1 x Extension silicon 75 cm (Graupner)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Extension silicon 30 cm male (Graupner)
1 x Extension silicon 10 cm (Futaba)
1 x Futaba male 40 cm extension
1 x Extension silicon 100 cm (Futaba)
1 x Extension silicon 35 cm male (Futaba)
1 x Bateria DJI Mini 2 2250 mAh
1 x Glases Flitemaster
1 x Prolongador S-Bus JR/JR 20cm
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x Premium servo extension 100cm
1 x Premium servo extension 25cm
3 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Prolongador S-Bus JR/JR 10cm
1 x NF-3XL set
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 25 cm (Futaba)
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x 73x24 mm hard foam KOVO wheel (2 pcs)
1 x 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x 45x9 mm foam special light KOVO wheel with radius (2 pcs)
1 x 89x25 mm (3.50") Type jets aluminium core wheel
1 x 150 mm inflatable superlight deluxe wheel (2 pcs)
1 x 110x55 mm SLH KOVO wheel
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Lock nut M4 (10 pcs)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Floating M4 washer pad (36 pcs)
1 x Conector BEC female (10 pcs)
1 x AC-10 pre-rotacion with motor
1 x Blade Holder Full (4 blades)
1 x 76 mm light wheels (2 pcs)
1 x 60x25 mm tail wheel "type F3A"
1 x PowerBox Smokepump JETs 2x outside
1 x External LED's (2 pcs)
1 x Extension for SensorSwitch 30cm
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x PowerBox Smokepump
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Extension MPX-MPX 20 cm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Motor mount class 48"
1 x Electric Fuel Pump 12v
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Reductora IPS 150 DX2BB-BXCS 7:1
1 x 460 mm EPP Floats
1 x Reguladro ACTROCON 60A
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x 29,0 mm propeller (left propeller)
1 x 290 mm 8x4 M4 shaft ship
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Actuador lineal HLS12-100210-7.4v
1 x Fiberglass plate 350x150x1.0 mm
1 x Catalog AERO-NAUT 2016
1 x 3 mm Leader (L 100 mm)
1 x 14 mm Portholes for screws (10 pcs)
1 x Cover cap drop-shaped paintable 43 mm
1 x 3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
2 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Skyray (RBC Kits)
1 x YAK-23 "FLORA" (RBC Kits)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Carbon plate 350x150x3.0 mm
1 x Interface Jack Adapter IKARUS
1 x Motor ACTRO 35-4-790
1 x Motor RACE 720 Navy 12v
1 x Remolcador "Jonny Hafenschlepper"
1 x Regulador Actro-Marine 80A
1 x Race Outboard MERCURY type A
1 x 36,0 mm propeller (rigth propeller)
1 x 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
10,330.39EUR
Manufacturers
Languages
Español English
Currencies