229.00EUR

PowerBox Evo
[POWER4250]


PowerBox Evo
Product description
The PowerBox Evo is an ultra-compact dual power supply featuring 7 channels, regulated output voltage and telemetry.
The 7 inputs are assigned to 10 outputs, allowing two servos to be controlled in parallel on each of 3 channels, without requiring additional Y-leads. All servo outputs have integral signal amplification and are protected against servo feedback currents.
The PowerBox MicroSwitch included in the set is not subject to wear, and operates both electronic switches reliably. It is also used to set the output voltage and the battery type.
By default the two high-performance voltage regulators deliver 6.0V, but that value can easily be changed to 7.4V, 7.8V or no regulation at all using the PowerBox MicroSwitch.
The machined aluminium heat-sink ensures a high continuous load capacity.
The PowerBox Evo supports all current telemetry systems: PowerBox, Jeti, Futaba, Multiplex, Graupner, Spektrum and JR, which means that the voltage of both batteries can be monitored conveniently from the transmitter. It is also possible to read off the state of charge of the batteries at any time using the two tri-colour LEDs.

Features
7 channels
10 outputs
High-performance battery backer with high continuous load capacity
All power electronics duplicated
Redundant electronic switch
Four selectable output voltages: 6.0V, 7.4V, 7.8V or unregulated
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link, JR X-BUS and Graupner HoTT
All features can be controlled from PowerBox and Jeti transmitters
Signal amplification for all 10 outputs
Voltage indication by means of tri-colour LEDs
Supports four battery types: LiPo, LiIon, NiMh/NiCd, LiFe
Servo feedback current suppression
Machined high-performance heat-sink for optimised heat dissipation
Machined, anodised aluminium switch case
Compact format
Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S Lilon, 2S LiFePo, 5S NiMH
Current drain Power-on state 66mA
Current drain Standby 8μA
Maximum load current 2x10 A (<30s 2x 40A)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input PWM
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, Multiplex, JR, G
Channels 7
Servo sockets 10
Supported telemetry systems P²BUS, S.BUS2, EX-BUS, SRXL2, M-Link, Hott, JR-DMS
Dimensions 89 x 55 x 18 mm
Weight 69g
Weight Sensor Switch 8g
Temperature range -30°C to +105°C
Set contents
PowerBox Evo
MicroSwitch
8x patch leads
6x fixing screws
4x rubber grommets and brass sleeves
Operating instructions


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension MPX-MPX 20 cm
1 x Starter EM Gear Power 80
1 x Conector MR-60 (pareja)
1 x Turbina KINGTECH K320 G5
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
2 x Para-RC Mix
2 x Paramotor BackPack XXS 2
2 x Windsock Ozone L - 700 mm
2 x Paramotor Kit Camo H1.5/ Ben Red
2 x Aramid 50 daN 50 m
1 x Parachute P4
1 x HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x JMB-Jets K8 Trainer Jet PNP 2050 mm
1 x FELIX JR Yellow/Black 1750 mm
1 x PC-21 2.880 mm (w/o oracover)
1 x RANGER Jet Red/White 1.854mm combo
2 x Boomerang ELAN STARS & STRIPES Combo
1 x Adaptadores carga 6s JST-XH
1 x RANGER Jet Red/Yellow 1.854mm combo
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x XICOY X45 rail
1 x Futaba Female 40 cm extension
1 x Motor mount VANQUIST 48" F3A
2 x LOWER TOW HOOK
1 x Extractor piñones 2.3/3.2 mm
2 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Cabel "Y" 30 cm (Futaba)
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Adjustable launching hook
1 x Piloto Jet "Green" 1/6 Scale
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Towing hook
1 x Extension silicon 100 cm (Graupner)
1 x 1/4 Pilot "Heidi"
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x 1/10 Pilot "Jack"
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Extension 90 cm (Futaba)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x Shaft sleeve LAMA
1 x Extension silicon 30 cm male (Futaba)
1 x T-shape holder metal LAMA
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Tow hook for tug
1 x Prolongador S-Bus JR/JR 20cm
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Cabel "Y" 15 cm
1 x Flybar support metal LAMA
1 x 1/12 Pilot "Langley"
1 x Futaba male 40 cm extension
1 x Large flex hinge (12 uds)
1 x Oratex Red Fokker 10 m
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Angle measurer
1 x Washer 2.2×4
1 x WINGO 2 PNP
1 x Ferrita 14x8x5.5 mm
1 x DC-3 Douglas (White/Blue) 1800 mm
1 x 12 mm portholes (10 pcs)
1 x 33,0 mm propeller (rigth propeller)
1 x Field folding model stand
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Green silicone 0,25 qmm wire (50 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x 10 mm portholes (10 pcs)
1 x Head spacer
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Oracover Green10 m
1 x 10m servo "Premium" wire (white/red/blue)
1 x 270 mm 3/3 mm shaft ship
1 x Blade holder lower
1 x Oracover light Grey 2m
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Crystal TX 35.150 Ch 75
1 x Head upper part
1 x Wing OXY 5,0 m2
1 x Carbon plate 350x150x3.0 mm
1 x Paramotor Trike XL
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Windsock Ozone L -1200 mm
1 x Opale Rucksack
1 x Set cintas unión paracaídas 145 cm
1 x Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x Propeller POWER-PROP 7x7
1 x Spinner plastic black fixed propeller 30 mm
1 x KIRA 600-30 6,7:1
1 x PYRO 650-53L EJE LARGO
1 x Lock nut M2.5 (10 pcs)
1 x Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x 42 mm white plastic spinner for fixed propeller
1 x 36 mm black plastic spinner for fixed propeller
1 x TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x Spinner plastic white fixed propeller 30 mm
1 x MB-339 Aermachi 84" ARF c/retractil electric
1 x KIRA 480-43
1 x Program card KAVAN PRO
1 x Lock nut M4 (10 pcs)
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x KIRA 600-16
1 x KIRA 500-36 6,7:1
1 x KIRA 500-30 6,7:1
1 x KIRA 400-27
1 x KIRA 480-34 5,2:1
1 x PYRO 750-50L Competition
2 x Fixed launching hook
1 x Motor KAVAN PRO 2225-1600
1 x KIRA 480-43 5,2:1
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x KIRA 600-24 6,7:1
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Extension silicon 25 cm (Futaba)
1 x ABS angle 4,0x4,0x1000 mm
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x KIRA 480-38 5,2:1
1 x Servo HBS 690BB HV Digital
1 x MultiLog Altimeter
1 x Indoor Brushed motor kit
1 x Crystal Universal RX 35.140 Ch 74
1 x Crystal Universal RX 35.130 Ch 73
1 x Servo NARO Max Std
1 x EasyFLY Addon
1 x LA500 rotor head core
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x White silicone 0,25 qmm wire (150 m)
1 x 5 line servos wire black (1 m)
1 x 10 mm Quick clamp_L (6 pcs)
1 x Small pinned hinge (12 uds)
1 x 290 mm M4 7/8x212 mm shaft ship
1 x Motor MVVS 5.6/690 GLIDER
1 x Threaded insert M4 (4 pcs)
1 x Pilot "Dick" Legends Series (Slimline)
1 x 3,2 mm Prop Adapter M5
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Nut for mounting M6 (4 pcs)
36,787.48EUR
Manufacturers
Languages
Español English
Currencies