1 x | Round Rod 1,5x1000 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | |
2 x | Strip 1,5x1,5x330 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Motor DLE 200cc Premium Muffler |
1 x | 20x200 mm battery rings |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
2 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
3 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | PPM Encoder Module |
1 x | PIX Hawk with accesories |
2 x | Cabel "Y" 30 cm (graupner) |
2 x | Futaba male 40 cm extension |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Futaba Female 40 cm extension |
2 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Circlick securite |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Extension silicon 30 cm female (Futaba) |
2 x | Extension silicon 30 cm male (Futaba) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Glases Aspen |
3 x | Wheel FEMA 178 mm / 8 mm |
1 x | Ball link M1.6 (6 uds) |
1 x | Fixed launching hook |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
2 x | Wheel FEMA 127 mm / 6 mm |
2 x | Adapters for 7.5 - 35cc aircraft and naval engines |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
2 x | Brake for 140 mm wheels |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
2 x | Compact on-board starting system (9724) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
3 x | Mudguard for 140/165 mm wheels |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | BOX-Setup Actro-marine |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Round Rod 2,0x1000 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Motor DLE 200cc Std |
1 x | Round Rod 3,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Propadapter for motor A50-V3 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | EME 55 cc carburetor WALBRO |
2 x | Spark motor OS nº 8 |
1 x | DLA 116 crankshaft |
1 x | Sparkplug 1/4-32 EVO 10GX |
2 x | Spark plug key NGK MVVS |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Conector JR Servo male (10 pcs) |
1 x | GameCommander USB Universal |
1 x | Opto Gas Engine Kill Switch |
1 x | Bujia OS G5 gasolina |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Tacometer mini ignition RCEXL |
1 x | Electromotor starter EME 35cc |
1 x | Aluminium ignition bad (blue) |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | RCEXL Electronic ignition twin A-02 |
2 x | Spark motor OS Type F |
1 x | Sparkplug 1/4-32 Glow |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | SAITO FG-36 carburetor |
1 x | Axle for motor A20-S (3 uds) |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | KIRA 480-31 5,2:1 |
2 x | Rotorshape Autogyro |
1 x | AXI 2826/8 V2 Long |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Xplorer3 anemometro |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | AXI 2826/12 V2 |
1 x | Couple M4 for wire (10 pcs) |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Backmountset complete A40 |
1 x | Premium servo extension 50cm |
1 x | Servo Fork |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Futaba Female 40 cm extension |
1 x | Nut M2 securing |
1 x | Head lower part New |
1 x | Screws M1,6x6 Allen |
1 x | Head core |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Connectors MPX black male |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
2 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Compact on-board starting system (9715) |
1 x | Servo holder for retract |
1 x | MEKP Harderner 100 g |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Regulador Actro-Marine 60A |
2 x | Compact on-board starting system (9512) |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Z-shaped servo mount |
1 x | GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Round Rod 5,0x1000 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Grease Dryfluid HELI |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Fiberglass plate 620x540x1,0 mm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Micro control horn T2 Ø 1 |
1 x | Propadapter for motor A60-V2 |
1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | 2 mm Prop Adapter M5 |
1 x | Adapter 3,0 mm M6 |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | Aqua RACE 70 (without motor) |
1 x | ESC Actro-Marine 30A |
1 x | Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | DLE 55 carburetor |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Glass fabric 25 g (2 m²) |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Propeller hub spacer 8/5.5 |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Foam plastic plates (310x210x5 mm) |
2 x | Film release agent PVA 25 ml |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Fiberglass plate 350x150x3.0 mm |
2 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | XPower XC3522/5 LS |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Adapter 5,0 mm M8 |
1 x | 400 Newtons FEMA absorber |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Premium servo extension 100cm |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Restrictor FESTO 3/3 mm |
1 x | PHOENIX FW-190 FOCKE WULF - 1720 MM ARF KIT |
1 x | 200 Newtons FEMA absorber |
1 x | Angled clevis with threaded rod M3 |
|
23,635.64EUR |