Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA85080

16.00EUR

EWC3 40 cm wing connector
[EMCA85080]

EWC3 40 cm wing connector

The ingenious plug system for R/C modelling!
- reverse polarity protected
- high current qualified (up to 12A per contact)
- 100% safe connection because of locking
- small construction form due to 2,54 mm contact spacing
- easy mounting due to packaging
- strong high flexible cable with 0.34mm² (AWG22) cross section
- single connector version for up to two servos

The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.

The servo connection cable will be soldered directly to the PCB. Also 2 cables (one above one below) can be soldered, that results a kind of a v-cable. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.

The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.

Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, EWC connection cable (JR) 40cm (15.75in) with lockable counterpart connector socket.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spinner 159x200 mm GFK temporarily out of stock	DUPLEX 2.4EX MU 3 Sensor temporarily out of stock	Quick hose connector 4-4 mm temporarily out of stock
Cockpit aluminium closing temporarily out of stock	Conector JR/Uni Servo male BLUE silicon (10 pcs) temporarily out of stock	Blue aluminium servo arm V2-Hitec 1,0 inch M3 temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	PT 20x13 EL Propeller
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Cabel charger transmitter GRAUPNER
1 x	TP/TopFuel - XH 2/3S Adapter
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	CM-3
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/4 Pilot "Mike"
2 x	BEC 3A FOXY
1 x	APM2.6 Power module with 5.3V DC BEC
2 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	CC 03
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Pilot JAN 1/4 Saiplanes
1 x	USB HLS prog. interface
2 x	Adapter lead MPX/EC3
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	JETImodel SINGLE BEC
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	3 LiPo XH>EH adapter
2 x	30 cm BEC cable (female)
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	1/6 Pilot "John"
1 x	Dean "T" - Futaba Adapter
1 x	4 LiPo XH>EH adapter
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Steering arm 16 mm Ø 3 mm
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Screw-lock connector M2 (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
3 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Locking cable tie 2.5x100 (uds)
2 x	9x4.7 * 22x12 carbon propeller
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Long pinned hinge (6 uds)
1 x	Green smoke canister 100 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
2 x	Female connector for 10 pines AWG
1 x	EWC3 40 cm wing connector
1 x	DPSI Ampere battery backer
2 x	EWC6 40 cm wing connector
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Female connector for 6 pines AWG
1 x	Extension 2/3 lipos JST - JST/C
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Extension 2/3 lipos JST/C
1 x	Electronic switch JETI SP6 0-15v/6A
1 x	Hacker X-Pro USB interface V2
1 x	CC 05
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
1 x	UBEC 6A KAVAN
1 x	1/6 Pilot "Garry"
1 x	SPS 70V 140/280 A
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Canopy Latch
1 x	11 mm Rubber pads (14 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Allen wheel collar M4x6
1 x	Tip wing protector 30x10 (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	45 mm rods + T patellas set for direction control
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
2 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	6 mm aluminium horn with patella
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn 6/27 with M3 Bearing
1 x	Horn for flap control (1 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	5 mm M2 variable horn
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	20 mm carbon horn
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Shirt Hispano Aviación
1 x	Cap Hispano Aviación
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Horn 5/20 with M2 Bearing
1 x	Horn 6/20 with M3 Bearing
1 x	Cable control set
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Control horn long w/ball
1 x	Set propellers 5x3 Multicopter (2cw+2ccw)
1 x	Set propellers 10x4.5 SF Carbon Multicopter
1 x	Servo AN-8 HBA
1 x	Futaba 38 mm servo arm
1 x	Antonov AN2 Scale 1/6 - 3m
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Futaba 54 mm servo arm with ball link
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	ALU double servo arm 3 mm shaft
1 x	Extension MPX-MPX 20 cm
2 x	METEOR 1.000 mm kit
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Futaba 38 mm servo arm with ball link
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	Futaba 52 mm servo arm
1 x	54 mm Futaba servo arm tandem with ball link
1 x	Futaba 2x20 mm servo double arm
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x	Futaba 30 mm servo arm with M3 ball link
1 x	Futaba 20 mm servo arm
1 x	Hitec 25 mm servo arm with ball link
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	XTorque CFK Servohebel 38
1 x	HITEC 20 mm servo arm with ball link
1 x	Hitec 38 mm servo arm
1 x	Hitec 20 mm servo arm
1 x	Hitec 52 mm servo arm
1 x	Hitec 46 mm servo arm with ball link
1 x	Futaba 25 mm servo arm with ball link
1 x	Hitec 30 mm servo rounded arm
1 x	46 mm Futaba servo arm tandem with ball link
1 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Adapter rotula M3
1 x	Hitec 38 mm servo arm with ball link
1 x	17 mm servo arm with ball link DES Graupner
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	Futaba 46 mm servo arm with ball link
1 x	Conector MR-60 (pareja)
1 x	Jet Pipe for ULTIMATUM 2m
1 x	Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x	SPARK Switch 5.9v
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Male connector for 16 pines AWG
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x	Avia spare blue cockpit (Top Model)
1 x	ALBATROS L-39 G2 "Camo Tiger" Turbine ready
1 x	CC 01
1 x	CC 02
1 x	1/6 Pilot "Buddy"
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	JETImodel DPS 40
1 x	SPARK Switch 12v
1 x	Extension 5 lipos JST - JST/C
1 x	SBEC 40
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Opto Gas Engine Kill Switch
1 x	Selfstart electronic switch
1 x	PSC 6
1 x	Male connector for 6 pines AWG
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	MPX-Dean "T" Adapter
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Female connector for 20 pines AWG
1 x	JETImodel Addcap 1640
1 x	SPARK Switch 7.4v
1 x	Electronic switch JETI SP06 Opto
1 x	Female connector for 12 pines AWG
1 x	MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x	BULLIT Wing 1095 mm
1 x	58 mm micro servo cover

8,088.52EUR