Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	T-Motor U7-V2.0 Kv420
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	ABS I Strip 20x10x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Flat washer 1.7 mm (20 pcs)
1 x	ORACOVER Fluor red (2 m)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Horn 16,5x20 mm (2 pcs)
1 x	BALSA triangular 8x8x1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Couple M4 for wire (10 pcs)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	1/10 Pilot "Jack"
1 x	L-Connector 1.5 mm x 1000 mm
1 x	LOWER TOW HOOK
1 x	Pine wood slat 10x10x1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Joint with bearing M2,5 22x5,5
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	800TVL CMOS camera for FPV
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Pilot JAN 1/4 Saiplanes
1 x	ABS I Strip 10x5x1000 mm
1 x	M3-M4 rubber washer (8 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Round Rod 3,0x1000 mm
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Spray Graphit 33
1 x	Ball link M3 (10 pcs)
1 x	1/12 Pilot "Cougar"
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Long ball link M3 (6 uds)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Short ball link M3 (6 uds)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	20 mm carbon horn
1 x	6 mm ball link M3 (10 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	1/6 Pilot "Garry"
1 x	Ball link M1.6 (6 uds)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	1/6 Pilot "John"
2 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Small aluminium horn blue (2pcs)
1 x	Nitroverdu 500 ml
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Spray EC Red 400ml
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	500 ml sealer (DOPE)
1 x	Joint with bearing M3 22x5,5
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Release wax 250ml
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Round Rod 6,0x1000 mm
1 x	Oracover Brown 2 m
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Paint gun for sprays
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Futaba Female 40 cm extension
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Slave-cable USB Easy Sim
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	SIMtransmitter 6 Mode 2
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Vasa model Catapult
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	SE Ring 350 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	20x1000 mm Ring Strap Back To Back
1 x	VITAPROP CARBON FOLDING PROP 15x9.5"
1 x	MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x	PowerBox 12
1 x	Extension for SensorSwitch 60cm
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oracover Yellow CUB 10 m
1 x	Futaba 30 mm servo arm with M3 ball link
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Servo DITEX EL0510M
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	USB Mini Camera endoscope
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Ply-Span 450x600/13g Orange
1 x	Servo MKS HV69
1 x	Towing hook <3m
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	3 mm Prop Adapter M6
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Marker ties (20 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Tape GFK 50 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Spikes Band (5 m)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	20x200 mm battery rings
1 x	Tow hook for tug
1 x	Ball link M3 RPA's-UAV's
1 x	Switch Cap M (blue)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Switch Cap L (Red)
1 x	Long ball link M1.6 (6 uds)
1 x	Battery FUTABA 18MZ
1 x	Receiver bed (Blue)
1 x	PowerBox Champion SRS
1 x	PowerBox PowerExpander SRS
1 x	Adap/Exten for Futaba 12-14C
1 x	Ball link M3 (6 uds)
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	SIG Coverall 1.2x0.9 m
1 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	Angle measurer
1 x	Futaba 25 mm servo arm with ball link
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Hitec 46 mm servo arm with ball link
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Propeller 10x4,7 SlowFlyer
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Hitec 25 mm servo arm with ball link
1 x	MYLAR film A350 (1000x500 mm)
1 x	ABS Strip 1.0x5.0x1000 mm

4,213.20EUR