2 x | SIMtransmitter 6 Mode 2 |
1 x | Slave-cable USB Easy Sim |
3 x | Crimping tool |
3 x | 3,0x60 mm allen screwdriver |
3 x | Vacuum pump P1-N |
2 x | Ball Link Plier |
2 x | Ball Link Plier |
2 x | Screwdriver for Hexagon 1,27mm |
1 x | Adaptadores carga 6s JST-XH |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
2 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
1 x | Interface Jack Adapter IKARUS |
1 x | Screwdriver for Torx® TX6 |
1 x | Turbina KINGTECH K320 G5 |
3 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
3 x | Hot Glue Stick RED |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
3 x | Starter Sullivan-STAR 603 DINATRON |
2 x | Screwdriver for Torx® TX8 |
2 x | Cut tube |
1 x | Crimping tool |
2 x | Z Bender - S Type Tool |
3 x | Hot Glue Stick GREEN |
3 x | |
3 x | |
2 x | Starter 12v (Max 90 and 15ccm) |
2 x | Copier 5x20 cm pcs |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
2 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Copier 2x20 cm pcs |
1 x | Round Rod 2,5x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 3,0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | 30 cm DEANS female connector |
3 x | XH male balance (3S) connector (2 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
2 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Gold antispark 5,5 mm plug |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Conector BEC female (10 pcs) |
3 x | Banna gold connector 2,5 mm (M/F) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Connector CAN 15 |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Connectors banna oro 6,0 mm (M/F) |
2 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | MPX Sub-D Adaptor |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | XH male balance (5S) connector (2 pcs) |
2 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Horn 6/27 with M3 Bearing |
1 x | Tubo espiral FESTO 6x1 Black |
1 x | ESC MEZON 115 Opto |
1 x | SERVO HOLDER |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
3 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
3 x | Digital scale up to 40 kg |
1 x | Dremel PERMAGRIT 18 mm round lime |
2 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
2 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
2 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | XH male balance (2S) connector (2 pcs) |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Connectors DEANS (T) |
3 x | 1,5x50 mm allen screwdriver |
1 x | Mudguard for 140/165 mm wheels |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Propeller set 400 (2R+2L) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Connectors MPX black male |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Carbon plate 550x350x1.0 mm ECOTECH |
3 x | XH male balance (6S) connector (2 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
2 x | Carbon plate 350x150x2.0 mm |
1 x | Carbon plate 350x150x0.5 mm |
2 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Professional Servo tester |
1 x | Soporte servo KST X08/H and Plus |
2 x | Servo KST BLS825 V8.0 HV 35Kg 8.4v |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | BALSA trip 2.0x10.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | XH female balance (9S) connector (2 pcs) |
2 x | Carbon plate 350x150x3.0 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Connectors DEANS (T) micro |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
2 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Release film 100 cm x 50 m |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Wing conexion 2 servos Futaba 50 cm |
2 x | Spinner fixed propeller 60 mm / 5,0 mm |
3 x | EXTRA NG 74" white/red/blue (Skywing RC) |
3 x | EDGE 540-A 74" (1880 mm) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | PBS TJ 40-G1 Turbine |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Sealing Iron STANDARD |
2 x | Tool for entel |
1 x | Vacuum pump 12 CFM |
2 x | XT-60 Plug Mold |
2 x | Welder 100W/200V |
2 x | Universal Filter |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Tachometer Hyperion Multi-pala |
2 x | Tachometer HANGAR 9 digital |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | Propeller APC 10x5 Electric |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 11x10 Electric |
2 x | 2,0x50 mm allen screwdriver |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 12x10 Electric |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
2 x | DUPLEX 2.4EX Central Box 210 |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Wing Joiner ULTIMATUM 2.0 m |
2 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
2 x | Carbon plate 350x150x1.0 mm |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Starter EM Gear Power 80 |
1 x | Starter EM Gear Power 250 |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Sealing Iron Sleeve STD |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | Sealing Iron Sleeve PROF |
1 x | Sealing Iron Profi LCD |
1 x | Tube bender |
1 x | Sub-D Plug Mold |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
2 x | Propeller APC 11x4.7 SF |
1 x | Schul-Malpinsel Gr.5 |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Propeller APC 12x6 SF |
1 x | Propeller APC 13x6.5 Electric Pusher |
2 x | Propeller APC 12x6 Electric Pusher |
1 x | Propeller APC 13x8 Electric |
2 x | Propeller APC 13x6.5 Electric |
2 x | Propeller APC 11x4.5 Electric Pusher |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Propeller APC 10x6 Electric |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | PropCover 16-20" (2 pcs) |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | ANGEL 48" pp orange/black/white |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | PropCover 16-20" (1 pcs) |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
2 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
1 x | ZEUS F3A 2m |
1 x | ANGEL 48" pp red/blue/white |
3 x | LASER 73" 1.85m (05) PILOT |
1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Battery charging cable XT60 |
1 x | BALSA triangular 15x15x1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Magnetic Connect locking system |
1 x | Conector BEC male (10 pcs) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | XH male balance (9S) connector (2 pcs) |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Servo KST X10 MINI wing 10mm 23g 7.5Kg |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Carbon plate 500x400x2.0 mm ISOTECH |
1 x | AXI 2212/12 V2 |
1 x | AXI 2217/12 V2 |
1 x | Kavan Car 25% nitro 1l |
1 x | Fuel bottle 500 ccm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | F450/550 Quadcopter, landing gear |
1 x | Parachute XTRALITE S |
1 x | Connectors MPX male |
2 x | XH male balance (8S) connector (2 pcs) |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors MPX black female |
1 x | Extension lead 15 cm Multiplex |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Chopped glass fibre strands 3 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | HBC 10035-3 32-Bit |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | AXI 2217/20 V2 |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | AXI 2814/6D V2 |
1 x | AXI 2820/12 CYCLONE |
1 x | AXI 2820/10 V2 |
1 x | AXI 2820/10 V2 Long |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Propeller APC 22x12 WE Electric |
1 x | Mini-handed clamp |
1 x | Propeller APC 24x12 Electric |
1 x | Propeller APC 20x10 Electric |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART) |
2 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | Retract undercarriage |
1 x | 76 mm light wheels (2 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Propeller APC 13x4 Electric Pusher |
1 x | CA Glue fast 20g |
1 x | Cyano INSTA - CURE™ (225g) |
1 x | Propeller APC 21x14 Electric |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Propeller APC 19x12 WE Electric |
1 x | MPX plug mold V1 |
1 x | Propeller APC 20x15 Electric |
1 x | Propeller APC 20x12 WE Electric |
1 x | Propeller APC 16x12 Electric |
1 x | Propeller APC 15x4 Electric Pusher |
1 x | MPX 8 pins plug mold |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
2 x | EDGE 540-A 91" (2310 mm) |
2 x | EXTRA 300 78" V3 Orange/Blue |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | Spare spinner 36 mm 3-Bl |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | Central piece 42 mm + 2,5º |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Spare white 36-38 mm spinner |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
1 x | Heli digital angle measurer |
1 x | EC-Cutter |
1 x | Propeller 3x3 |
1 x | Cooler motor type 150 |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
2 x | Hexagonal ball head 2.0 x 50 mm |
1 x | |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 14x12 Electric |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Propeller APC 21x12 WE Electric |
1 x | Modelling compound (Plastilin), sculptor's quality 1 Kg |
1 x | Propeller APC 14x8.5 Electric Pusher |
1 x | Propeller APC 15x4 Electric |
2 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Propeller APC 15x6 Electric |
1 x | Propeller APC 19x12 Electric |
1 x | Hot Glue Stick BLACK |
1 x | Debonder UN - CURE™ (30g) |
1 x | Propeller APC 17x8 Electric |
1 x | Heli blades angle measurer |
1 x | Mini Infrared Thermomiter |
1 x | Heat Seal Iron |
1 x | Propeller APC 26x15 Electric |
1 x | Cyano ULTRA - CURE™ (21g) |
1 x | Propeller APC 16x4 Electric Pusher |
1 x | FOAM - CURE™ (24g) |
1 x | Propeller APC 22x12 Electric |
1 x | Propeller APC 21x13 Electric |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Cyano INSTA - FLEX+™ (25g) |
1 x | Cyano INSTA - CURE™ (56g) |
1 x | Propeller APC 20x13 Electric |
1 x | CA Glue (medium) 20g |
2 x | Sukhoi 29S 2,6 m Yellow/Black (SebART) |
1 x | EXTRA NG 85" 2159mm red/white |
1 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
2 x | EXTRA 300 78" V3 Yellow/Red/Blue |
1 x | Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART) |
1 x | entral piece 3Bl 42 mm 0º |
1 x | Red spinner 45 mm |
1 x | 40 mm black plastic spinner for fixed propeller |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | Red spinner 40-45 mm |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm |
1 x | Spare white 38-45 mm spinner |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Central piece 47 mm - 5º |
1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
1 x | Central piece 47 mm + 5º |
1 x | Spinner propeller pleg. 45 mm / 6,0 mm "Z" |
1 x | Spinner propeller pleg. 32 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
1 x | Dremel 3000 130W |
1 x | Cooler motor type 400 |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | 55% silver electrodes (2 pcs) |
1 x | Digital precision scale up to 2000 g |
1 x | Propeller 3x2 |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Dean-T Plug Mold |
1 x | Starter Sullivan-STAR 601 |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Dremel PERMAGRIT thin lime |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | Propeller APC 13x10 Electric |
1 x | Propeller APC 11x3.8 SF |
1 x | Propeller APC 10x6 Glow/Gas |
|
69,981.29EUR |