59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Conector FUTABA Servo male  (10 pcs)
Conector FUTABA Servo male (10 pcs)

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Aramid 50 daN 50 m
2 x Paramotor Trike XL
1 x Windsock Ozone L -1200 mm
1 x Set cintas unión paracaídas 145 cm
1 x Parachute BACKUP X100
1 x MAX pilot ARTF
1 x Para-RC Trike "RC-Bullix"
1 x Wing OXY 5,0 m2
1 x Trike XL motor set (motor+esc+prop)
2 x Parachute PV6 for F3J
2 x Para-RC "RC-Evo-Cross" Rescue
2 x Opale Rucksack
1 x Ballast 700gr OPALE
1 x Rescue 1,8m2 / BackPack
1 x BALSA trip 6.0x6.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
3 x BALSA triangular 15x15x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 10x10x1000 mm
2 x Optical RPM Sensor
1 x Glases Innovation Plus
1 x Glases Aspen
1 x Glases Nimbus "Black"
1 x Glases Stratus
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x ABS "T" angle 4.0x4.0x1000 mm
2 x U Profile ABS 5,0x10,0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
2 x ABS angle 1.5x1.5x1000 mm
2 x Profile ABS Square 2 x 1000 mm
2 x ABS "T" angle 6.0x6.0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
3 x L-Connector 1.0 mm x 1000 mm
4 x ABS "T" angle 2.0x2.0x1000 mm
2 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
2 x Profile ABS Square 1 x 1000 mm
2 x ABS angle 4,0x4,0x1000 mm
2 x Flat Connector 4.0 mm x 1000 mm
2 x ABS angle 3,0x3,0x1000 mm
2 x Profile ABS Square 3 x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
3 x Profile ABS half cane 2.5x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x T-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x SE Ring 350 mm (2 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Extension silicon 30 cm male (Graupner)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Towing hook
1 x LOWER TOW HOOK
2 x ABS Strip 1.0x4.0x1000 mm
1 x AX-60 starters (5 pcs)
1 x Servo HITEC D625 MW
1 x Gear set HITEC HS-81
1 x Para-RC Mix
3 x ABS angle 5,0x5,0x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
2 x Walnut wood slat 1.5x1.5x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Balsa panel 1.5x100x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Carbon plate 350x150x1.0 mm
1 x Pine wood slat 10x10x1000 mm
1 x Glases Moritz
1 x Balsa panel 1.0x100x1000 mm
2 x Profile ABS triangular 6.0x1000 mm 90º
2 x Anodized aluminium servo M3x16 screw (4 red pcs)
2 x Blue Aluminium lock nut M4 (4 pcs)
2 x Lock nut aluminium M2.5 (4 pcs)
2 x Pan Head Screw M2x8 PH
2 x Pan Head Screw M2x6 PH
2 x Lock nut M5 (10 pcs)
3 x Lock nut M2 (20 pcs)
1 x ABS angle 6,0x6,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x Profile ABS Square 4 x 1000 mm
2 x Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
2 x Nylon Screw M6x40
2 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x GameCommander USB Universal
2 x Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x SIMtransmitter 6 Mode 2
2 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
2 x Lock nut M2.5 (10 pcs)
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS half cane 4x1000 mm
2 x Profile ABS triangular 2.0x1000 mm 90º
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Profile ABS half cane 8.0x1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Spare Part Frame Set for EACHINE RACER 250
1 x ABS angle 2,0x2,0x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Profile ABS half cane 5.0x1000 mm
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Servo M2x9/16 screw (4 pcs)
1 x LUCAS pilot ARTF
1 x Propeller Pleg CAM-Prop 8x6
1 x Distanzstück motor OS 120 AX
1 x Coupling bush 5 - 5 mm
1 x Conector JAPAN G2 Set 5 pares
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Manometer 4 mm
1 x Foreman, scale 1:32
1 x Canopy Latch
1 x Servo SAVOX SH 0257 MG
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x 2,5x60 mm allen screwdriver
1 x Screw M2.5x5 (10 pcs)
1 x Screw M3x8(10 pcs)
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x Adjustable brass horn threaded M3
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x ABS I Strip 10x5x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Screw M2.5x20 (10 pcs)
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 12.7 mm 2:1 black termoretract tube
1 x 2,0x50 mm allen screwdriver
1 x MZ-10, 5 Channel HoTT
1 x Blue Aluminium lock nut M2 (4 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Lock nut M4 (10 pcs)
1 x Screws 2,2 x 6,5 mm (20 pcs)
1 x Pan Head Screw M2x8 PH countersunk head
1 x Nylon Screw M4x20
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Lock nut M3 (10 pcs)
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x Screw M2x8 (10 pcs)
1 x Servo M2x7/16 screw (4 pcs)
1 x ABS Strip 1.0x2.0x1000 mm
1 x SyRen 50A 6V-30V Regenerative Motor Driver
1 x Connectors MPX male
5,824.67EUR
Manufacturers
Languages
Español English
Currencies