1 x | Ferrita 17x10x6.5 mm |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Nitroverdu 500 ml |
1 x | Hobbylite Filler, Balsa colour |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
2 x | Release wax 250ml |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Canopy Latch |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Cockpit plastic closing |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Covered closure or fairings |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
2 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Straightened threaded rod M3 - 1m |
2 x | 10m servo "Premium" wire (white/red/blue) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Ball link M3 (6 uds) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | M3 INDUSTRIAL ball link (2 uds) |
3 x | Angle of incidence meter |
1 x | Short ball link M2 (6 uds) |
1 x | Propeller POWER-PROP 14x9 |
1 x | Short ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Straightened threaded rod M2-1m |
1 x | Long ball link M2 (6 uds) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
1 x | Silicone 0,35 qmm servos wire Graupner(100 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Surface Indicator Gauge Small |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Ball link M2 (10 pcs) |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Cable Cargador FUTABA |
1 x | Long ball link M3 (6 uds) |
2 x | Long ball link M1.6 (6 uds) |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
2 x | Field folding model stand |
1 x | 5 line servos wire black (1 m) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Propeller POWER-PROP 13x9 |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Ball link M3 RPA's-UAV's |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Bungee HLG Premium |
1 x | Ball link M1.6 (6 uds) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | Ball link M2,5 (10 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
2 x | Angle measurer |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Vasa model Catapult |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Socket head ball link M3 (2 uds) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | WingFix ULTRA Black Edition |
2 x | Medidor ángulos y/o incidencias |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
3 x | Propeller balancer |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Short ball link M1.6 (6 uds) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
4 x | Socket head ball link M3 (2 uds) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Parachute PV6 for F3J |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Ventral support for AX-18/AX-60 |
1 x | "M" set |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Support Pitot JETI |
2 x | Recessed MPX connector support (6 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
2 x | Tube support Ø 6mm (10 pcs) |
2 x | Support FUEL DOT V3 |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Cooler motor type 400 |
1 x | Motor holder for AC 28/7 |
1 x | PRO-HV Dual Action Valve |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 40 mm air cylinder |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Allen wheel collar M3x5 |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Allen wheel collar M4x4 |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | Rigid coupling brass Ø 2 mm L: 15 mm |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Silicone red 4,0 qmm wire (25 m) |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
2 x | Field folding model stand SebArt |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | ESC MEZON 115 Opto |
1 x | GPS Sensor + Logger OPTronics |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Support ECU Xicoy X-45 |
1 x | Support XT60 conector (2 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Crystal TX 35.150 Ch 75 |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Cockpit aluminium closing 5.4g |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | DIVA cabin cruiser |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | La Capitania di Venetia accesories |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Servo Controller Fibra optica |
1 x | Trailing leg 131 mm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | CC 11 Conector |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | SCHARNHORST accessories |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Split M1,2x10 (10 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
2 x | ALPHA 1000mm BL ARTR |
1 x | Fishing boat Jule Fischkutter |
1 x | Plastic fan 12x35 mm (3 pcs) |
1 x | Remolcador "Jonny Hafenschlepper" |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Oracover Black 10 m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Prop Holder AXI 41xx V2 |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Propeller balancer |
1 x | Oracover light Grey 2m |
|
10,881.17EUR |