430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x 800TVL CMOS camera for FPV
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
2 x Beech dowels 3.0 x 1000 mm
2 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x Beech dowels 10 mm x 1000 mm
3 x BALSA trip 4.0x4.0x1000 mm
2 x BALSA leading edge 8x10x1000 mm
1 x BALSA triangular 10x10x1000 mm
3 x BALSA trip 6.0x6.0x1000 mm
3 x Linden wood slat 2.0x2.0x1000 mm
3 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
2 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
3 x Liston HAYA 8 x 8 x 1000 mm
2 x BALSA trip 2.0x10.0x1000 mm
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Adapter lead MPX/XT60
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Support Flush MPX Conector (6 pcs)
1 x T-shape holder metal LAMA
1 x USB Mini Camera endoscope
1 x Balsa panel 5.0x100x1000 mm
2 x TMM 2512-3S heli
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Servo NARO Max Std
1 x Swing 1000
2 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Mini-Pix Esc 15 Amp
2 x ABS Strip 1.5x4.0x1000 mm
2 x Round Rod 3,0x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
2 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
2 x Strip 2,5x1,25x330 mm
2 x ABS Strip 1.0x2.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Balsa panel 10x100x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
2 x 75 mm INO spinner (carbon imitation)
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x Spinner INO 82 mm Chrome (Imitacion metal)
1 x Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x VTX 477 Carbon Rotorblade
1 x Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x 51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Nut for 515/518/519 spinner special for Hacker
1 x 89 mm INO spinner (carbon imitation)
1 x Spinner INO 63 mm Chrome (Imitacion metal)
1 x F3A carbon 85 mm spinner for Hacker Q-80
1 x 102 mm INO spinner (carbon imitation)
1 x Spinner INO 75 mm Chrome (Imitacion metal)
1 x 70 mm INO spinner (carbon imitation)
1 x Spinner INO 51 mm Chrome (Imitacion metal)
1 x Spinner INO 57 mm Chrome (Imitacion metal)
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x 57 mm INO spinner (carbon imitation)
1 x 45 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x 82 mm 12 mm axi 30 g F3A CF drilled spinner 3BL
1 x Spinner Alumin. fixed propeller 45 mm / 3,2 mm
2 x F3A carbon 85 mm spinner for AXI
1 x 38 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x F3A carbon 75 mm spinner for Hacker C-50
1 x Tail boom brace LOGO 480
1 x Propeller RF CFK 14.5x14
1 x Beech dowels 2.0 x 1000 mm
3 x Pine wood slat 5.0x5.0x1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Propeller CFK 12X6
1 x Propeller CFK 17x13
1 x Propeller CFK 18x19
1 x Propeller CFK 12.5x7
1 x Propeller RF CFK 10x17
1 x Program 5v SIO RS 232
1 x Jun-Si iCharger 4010 Duo
1 x Round Rod 5,0x1000 mm
1 x Blue smoke canister 140 g
1 x Propeller MASTER 7x3
1 x Propeller POWER-PROP 13x8
1 x Propeller MASTER 7x5
1 x Propeller POWER-PROP 11x8
1 x Propeller POWER-PROP 12x6
1 x Foam wheel Ø 351 mm (2 pcs)
1 x PPS-4D Propeller
1 x GLOW 5C + accesories
1 x Red smoke canister 140 g
1 x White smoke canister 100 g
1 x Green smoke canister 140 g
1 x Resistor 3W 5% 2R2
1 x 12x8 tree blades propeller
1 x Propeller POWER-PROP 16x8
1 x 12x6 tree blades propeller
2 x Propeller FALCON 27x10 3-BL carbono-gas
2 x FALCON 20X9 CARBON PROPELLER (GAS)
2 x BALSA trip 3.0x5.0x1000 mm
1 x 63 mm INO spinner (carbon imitation)
1 x Spinner INOVA 63 mm White
1 x Propeller APC 11x5.5 Electric Pusher
1 x 11x7 tree blades propeller
1 x 6x4 tree blades propeller
1 x MASTER 16x10 tree blades propeller
1 x Propeller MASTER 6x3,5
1 x 9x7 tree blades propeller
1 x Propeller MASTER 7x6
1 x BALSA triangular 6x6x1000 mm
1 x FALCON 26X10 CARBON PROPELLER (GAS)
1 x Propeller FALCON 5-BL 24x23.5
1 x Pine wood slat 10x10x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x FALCON 28X10 CARBON PROPELLER (GAS)
4,373.24EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies