Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1RDB

4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]

$BULL MØ1 2.600mm \"RED BULL\"$

BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
4 x	Kwik link with arm M5xM2,5xL30
1 x	Black large kwik link (10 pcs)
2 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Kwik link AL M3 con Clip (2 pcs)
2 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Metal clevis M2,5 (10 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Cable coupler M2 (10 uds)
2 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Couple M4 for wire (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
2 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Cable coupler M2 (10 uds)
2 x	Metal ball clevis M3 (10 uds)
2 x	WingFix ULTRA Black Edition
1 x	Field folding model stand SebArt
2 x	Medidor ángulos y/o incidencias
1 x	Propeller balancer
1 x	Propeller balancer
2 x	Extractor piñones 2.3/3.2 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Parachute expulsion foam
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Field folding model stand
1 x	18 mm wing servo holder
2 x	Truck-trailer for gliders 720 x 285 mm
1 x	Servo HITEC HS-485 HB
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	800TVL CMOS camera for FPV
1 x	65 mm mini servo cover
2 x	Servo SAVOX SV-1260 MG
1 x	Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x	USB Mini Camera endoscope
2 x	Pulley brass 5/1,5 (2 pcs)
2 x	Pulley brass 12/2 (2 pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
3 x	Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
2 x	Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
2 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Round Rod 1.0x3.5 cm
1 x	Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Micro clevis (10 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Retract undercarriage for gliders up to 2 Kg
1 x	Motor rotor LA-500
1 x	Baal link 4/14/4 (5 pcs)
1 x	Motor A30-12 L V4
2 x	Motor A40-14 L 14-Pole V4
1 x	Motor B20-10 L + 4:1 gearbox
1 x	Backmountset complete A40
1 x	Motor A30-14 L V4
1 x	Motor B40 10L + MAXON 4,4:1 Keramik
1 x	ESC KAVAN R-80SB SBEC 80A
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Esc master MEZON 120 Lite
1 x	Axle for motor A20-S (3 uds)
1 x	Motor A200-6
1 x	A40-10S V2 8-Pole + 6,7:1 PG
2 x	Motor A30-10 XL V4
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Motor A50-16 S V4
1 x	Motor A20-20 L EVO
1 x	Motor A50-10L Turnado V3 Glider
1 x	Motor A60-7XS V4 28-pole kv330
1 x	Motor A50-14L Turnado V3 Glider
1 x	Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x	Motor A50-14 L 8-Polos Electric turbine
1 x	Axle for motor A30-XL V2
2 x	Axle for motor A50-L
1 x	Motor A20-26 M EVO
1 x	Motor A60-5XS V4 28-pole kv420
1 x	Motor B20-18 L + 4:1 gearbox
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	Motor A30-12 XL Glider
1 x	Motor A50-12 L V4
1 x	Program Card KAVAN ES
1 x	ESC KAVAN PRO-160HV Opto 160 Amp
1 x	Esc X-75-OPTO-Pro
1 x	Esc MasterSPIN 80 Pro
1 x	Angle of incidence meter
1 x	Servoarm Aluminium SH-82
1 x	Servo inverter
1 x	Servo TT ACE SHV 1504 MG
2 x	HITEC DPC-11 programmer
1 x	Servo HITEC D645 MW
1 x	Servo SAVOX SA-128S SG
1 x	Servo SAVOX SV-1254 MG HiVolt Low Profile
1 x	Angle measurer
1 x	Servoarm SH-81, two sides, aluminium
2 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	L-shaped servo mount
1 x	Surface Indicator Gauge Small
1 x	Servo inverter
1 x	Servo Tester
1 x	Professional Servo tester
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo HITEC HS-53
1 x	Servo HITEC HS-125 MG
1 x	Servo HITEC D131 MW nano
1 x	Servo SAVOX SV-1270 TG
1 x	Servo HITEC HS-5085 MG Digi
3 x	20-25mm Servo Arm
1 x	Set Micro-horns HS-60/81/85
1 x	10-15mm Servo Arm
1 x	10-15mm Servo Arm HITEC
1 x	Servo SAVOX SW-1250 MG digi
1 x	Extension silicon 30 cm female (Futaba)
1 x	Servo M2x9/16 screw (4 pcs)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Motor A10-7 L 4,4:1
1 x	Motor B50-14 S
1 x	Program card KAVAN PRO

8,649.08EUR