1 x | Catalog AERO-NAUT 2016 |
2 x | La Capitania di Venetia 1:50 |
2 x | Tirpiz Battleship 1:200 |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | Propeller POWER-PROP 14x9 |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
3 x | Propeller POWER-PROP 7x7 |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 10x7 tree blades propeller |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Chili Race F3K (aramid nose) |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Motor SAITO FG-61 TS |
1 x | Propeller APC 14x8.5 Electric Pusher |
2 x | Hovercraft sailcloth |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | 80 mm rods set for direction control |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
2 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Buy Perforated film 145 cm / 50 m |
2 x | 100 mm rods set for direction control |
2 x | LOWER TOW HOOK |
2 x | Extinguisher CO2 - 2 Kg |
1 x | ORACOVER Ferrari red (2 m) |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Oracover Black 2 m |
2 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn mando small (2 pcs) |
3 x | Control horn long w/ball |
2 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Horn 6/27 with M3 Bearing |
2 x | |
4 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | 100 mm rods + T patellas set for direction control |
3 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Buy Perforated film 100 cm / 10 m |
3 x | Towing hook <3m |
2 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | A/C quality beech plywood 600x300x8.0 mm |
2 x | 9x4.7 * 22x12 carbon propeller |
1 x | Allen wheel collar M3x3 |
1 x | 45 mm rods set for direction control |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
4 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
2 x | Beech dowels 10 mm x 1000 mm |
3 x | BALSA triangular 8x8x1000 mm |
3 x | ABS 500 x 400 x 1 mm (white) |
3 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | 11 mm Rubber pads (14 pcs) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 45 mm rods + T patellas set for direction control |
3 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
2 x | Buy Perforated film 100 cm / 50 m |
3 x | Cap closure 33/23.5mm (2 uds) |
1 x | Clip fixing for wing (2 pcs) |
3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
3 x | Fixed launching hook |
3 x | ARAMID honeycomb 1300x2600x2 mm |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | 41x5,5 mm wires output (2 pcs) |
3 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | Towing hook |
3 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Allen wheel collar M4x6 |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Cable grommet Ø 5 mm (4 uds) |
3 x | Buy Perforated film 100 cm / 20 m |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Balsa panel 1.0x100x1000 mm |
2 x | Allen wheel collar M4x4 |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | Balsa panel 1.5x100x1000 mm |
2 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
3 x | Tow hook for tug |
4 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
2 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Allen wheel collar M3x5 |
3 x | SERVO HOLDER |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | VPP system propeller for AXI VPP motors (spare) |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | 140 mm rods set for direction control |
2 x | Cable grommet 9.5 mm (4 uds) |
3 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | 19 mm 2:1 black termoretract tube |
2 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
2 x | Oracover CARBON Metalic 1 m |
2 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
2 x | Ventus 1:4 set of instruments |
2 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ORACOVER Fluor red (2 m) |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | 5 mm M2 variable horn |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Brass control horn M2 short for wire (2 pcs) |
3 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Horn 6/20 with M3 Bearing |
2 x | 5 mm M2 variable inclined horn |
3 x | Horn for flap control (1 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
3 x | Horn 5/20 with M2 Bearing |
3 x | Brass control horn M4 short for wire (10pcs) |
1 x | 20 mm carbon horn |
3 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Horn DU-BRO 1/2 (2 pcs) |
2 x | Extra long horn 60x30 |
2 x | 6 mm blue aluminium threaded horn with patella |
2 x | Adjustable brass horn threaded M3 |
3 x | Horn 5/15 with M2 Bearing |
3 x | Horn 13,5x16 mm (2 pcs) |
2 x | Brass control horn M4 long for wire (4 pcs) |
2 x | Cable with accesories |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Spare white 38-45 mm spinner |
1 x | COPILOT Multiplex |
1 x | MULTIPLEX ALUMINUM CASE "M-LINK" |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | FELIX SportJet Blue 2200 mm |
1 x | Fournier RF-4D |
1 x | L-39 Albatros 1:4.75, Electric retract landing gear |
1 x | BOEING 727 kit |
1 x | Hot Glue Stick BLACK |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | LENTUS Multiplex Landig gear retract |
1 x | POWER PEAK D7 EQ-BID 12V/230V-Duo Charger |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Porpeller HUNTER 480 |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | HERON RR |
2 x | Ply-Span 450x600/13g White |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Extension lead 15 cm Multiplex |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | FunCub NG verde RR |
1 x | Arnes cruzado Confort de Luxe PROFI |
1 x | Alu servo arm double RHINO |
1 x | PROFI TX fastening rings |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | VIPER SL NAVY PNP 2270 mm |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | PC-21 2.880 mm RAAF Sheme |
1 x | Boeing (TX) T-7A Camo |
1 x | PC-21 2.880 mm RED |
1 x | PC-21 2880 mm Spinner 5Blade blue |
1 x | PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | X-RAY Micro QR (Elevator) |
1 x | 6x4 tree blades propeller |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | Duplex 2.4EX tray transmitter DC-16 II Black multimode |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Hot Glue Stick GREEN |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
1 x | Propeller Pleg CAM Carbon 10x6 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | 8x6 tree blades propeller |
1 x | Propeller MASTER AIRSCREW 13x6 |
1 x | Propeller MASTER 7x3 |
1 x | Propeller POWER-PROP 13x8 |
1 x | Propeller MASTER AIRSCREW 12x8 |
1 x | GPS Sensor + Logger OPTronics |
2 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Oratex Silver 2m |
1 x | Oratex Red Fokker 10 m |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Lense for Spotlights, 20mm |
1 x | PROFICOVER 5m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Chopped glass fibre strands 3 mm |
1 x | Pushrod octagone 3/2 |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Horn 6/35 with M3 Bearing |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | SIG Coverall 1.2x1.8 m |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Horn with ball 55x40 |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | 6 mm M3 variable horn |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Propeller MASTER 5,5x4 |
1 x | Helice CLASSIC-Prop 20x10 |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Propeller POWER-PROP 14x9 Izda |
1 x | Propeller POWER-PROP 16x8 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | Fiberglass plate 350x150x2.5 mm |
1 x | Ply-Span 450x600/13g Black |
1 x | Oratex Antik 2m |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Servo NARO Max Std |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Lead with adhesive (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Oracover ROYAL RED 2m |
1 x | Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport |
1 x | Oracover Orange 2 m |
1 x | Oracover Yellow CUB 10 m |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | 16mm Gear-Spotlight, 4W |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Carbon plate 550x350x2.5 mm ECOTECH |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Oratex Yellow Cub 10 m |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
2 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Towing hook |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Adjustable launching hook |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Vacuum bag, 1200 mm x 50 m |
3 x | Beech dowels 3.0 x 1000 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Pushrod octagone 4/3 |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Actuator Electric 25 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Covered closure or fairings |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | 6 mm aluminium horn with patella |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
2 x | Horn with ball 40x30 |
2 x | Horn 5/10 with M2 Bearing |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Small aluminium horn red (2pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Cable control set |
1 x | Horn mando long (2 pcs) |
|
43,094.04EUR |