130.00EUR

Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
[ROIEV800D]


Gafas FPV Eachine EV800D

Dimension: 180*145*82mm
Weight: 362g without antenna
Belt : three-way adjustable belt

Specification
Build in DVR
Record up to 720*576px full frame rate video, no frame lost (C10 card required)
Replay in MENU
Require C10 card to record full frame rate
Diversity Super sensitiveness in 2pcs RX5808 PRO modules
Great performance when two types (Linear and Omni) antennas are used
Display Screen size: 5.0 inch
Screen resolution: 800*480(No blur after enlarge by the lens)
Screen brightness: 600cd/m2 with special high brightness backlight LED for outdoor FPV
View Angle: 140/120 degree(Horizontal/Vertical)
Lens 3x boost of the video to acquire intense feel-in-there video; 92% transparent rate distort if light;
Battery Built-in 7.4V/1200mAh battery;
Each battery circle offer around 2hr working time;
11-20V wide range recharging voltage range, typical recharging voltage is 12V 2S (7.4 V) /3S(11.1V) battery as back-up power t to have long working time.
Frequencies (5.8GHz, with RaceBand)
CH CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
GROUP A or FR1 5865 MHZ 5845 MHZ 5825 MHZ 5805 MHZ 5785 MHZ 5765 MHZ 5745 MHZ 5725 MHZ
B or FR2 5733 MHZ 5752 MHZ 5771 MHZ 5790 MHZ 5809 MHZ 5828 MHZ 5847 MHZ 5866 MHZ
C or FR3 5705 MHZ 5685 MHZ 5665 MHZ 5645 MHZ 5885 MHZ 5905 MHZ 5925 MHZ 5945 MHZ
D or FR4 5740 MHZ 5760 MHZ 5780 MHZ 5800 MHZ 5820 MHZ 5840 MHZ 5860 MHZ 5880 MHZ
R or FR5 5658 MHZ 5695 MHZ 5732 MHZ 5769 MHZ 5806 MHZ 5843 MHZ 5880 MHZ 5917 MHZ

Features:
Built-in with super HD DVR record up to 720*576px resolution
Diversity RaceBand 40ch Auto-Searching
Two system (Display/Record duo core separated chipsets ) ensure no delay in displaying and no frame lost in recording(please use C10 super speed card to ensure the full frame recording)
Work friendly with pilot-OSD, no block on the important flying OSD information; Separable design, 5 inch screen can be used as small monitor on radio controller or with tripod;
HD high brightness 5 inch LCD specially tuned for FPV racing;
Diversity function, Built-in super sensitive 5.8GHz 40ch receiver module, with RaceRand;
Advanced auto-searching function and the working frequency show on screen;
Built-in 7.4V 1200mAh battery, each full charge offer 2 hours working time;
Wide range re-charge voltage 11-20V;
Accept 2S or 3S batteries as back-up power source, to prolong the working time; Nice ergonomic design and fit different faces;
Super-wide visible angle up to 82 degree;
92% transparent lens adopted, no distort, no blur on the edge of screen;
Light weight 375g with 3.5 hr 2000mAh battery, RTF for any scale racing game;
5 Inch 800*480px HD high brightness LCD

Package Included :
+ 1 x Eachine EV800D
+ 1 x Charger
+ 1 x 5.8G halfplanner antenna with RP-SMA connector
+ 1 x 5.8G RHCP cloverleaf antenna with RP-SMA connector
+ 1 x AVin cable
+ 1 x DCpower cabler to 3S balancer plug cable
+ 1 x Fresnel lens clearning kit
+ 1 x Instruction manual (English)


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 20 mm carbon horn
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x Horn 6/20 with M3 Bearing
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Horn with ball 55x40
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x Spikes Band (5 m)
1 x Foil for sticking flaps and ailerons
1 x Marker ties (20 pcs)
1 x Tape GFK 50 mm
2 x Tape GFK 38 mm
1 x Ring 320 mm length (5 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x SE Ring 400 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 480 mm (2 pcs)
1 x TrainerCord (master-learner)
1 x 5 LiPo XH>EH adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x APM2.6 Power module with 5.3V DC BEC
1 x Adapter lead MPX/EC3
1 x Circlick securite
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x USB HLS prog. interface
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 30 cm BEC cable (male)
1 x Adapter lead MPX/XT60
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Hardener P-25, canister 2.5Kg
1 x DYNAMOMETER S-1580
1 x Propeller POWER-PROP 13x9 Izda
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Electronic fog horn
2 x Reguladro ACTROCON 60A
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x ESC Actro-Marine 30A
2 x Fueraborda RETRO
2 x USBCOM 5i
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x HBC 10035-3 32-Bit
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Small aluminium horn gold (2pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x White gelcoat 1 Kg
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x 200 mm extensión servo HITEC/JR
1 x Premium servo extension 25cm
1 x Extension silicon 75 cm (Graupner)
2 x Prolongador S-Bus JR/JR 10cm
1 x Small adjustable control horn with bearing
1 x RH long aluminium horn (2pcs)
2 x Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x Long horn 50x26
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x SlowFlyer control horn (3 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 360 mm (2 pcs)
1 x Blade holder metal LAMA
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Male Prolonger TP 4/5S
1 x Extension 2/3 lipos JST/C
1 x PSC 6
1 x Extension 6 lipos XH > EH
1 x PowerBox SparkSwitch RS
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x MAX BEC
1 x Male connector JST SH 1.0mm with 10 cm wire
1 x Double conector with JR adapter and 200 mm extension
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x GM Propellers Folding propeller Scale 20x13 Carbon white 1 pair
1 x GM Propellers Folding propeller Scale 20x13 Carbon 1 pair
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x 5 mm Prop Adapter M8
1 x 3.2 mm Prop Adapter M8
1 x Indoor landing gear set
1 x Bearing block for noseleg landing gear
1 x SU 29S 140 carbon landing gear
1 x Propeller Pleg CAM-Prop 8x6
1 x 3,2 mm Prop Adapter M6
1 x 3.17 mm Prop Adapter CN-Spinner
1 x Mudguard wheels 112/127 mm
1 x Motor ACTRO 35-4-1100
1 x Aqua RACE 70 (without motor)
1 x ROOKIE 20Amp (25) A controller
1 x Motor ACTRO 35-4-790
2 x Horn 6/35 with M3 Bearing
1 x PSC 5
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Extension silicon 50 cm (Futaba)
1 x Extension silicon 30 cm female (Graupner)
1 x Extension PVC 150 cm (Graupner)
1 x Gearbox KPG25 4,2:1
1 x Esc KOSMIK 200 HV
1 x Gearbox KPG27 5,2:1
1 x KIRA 480-31 5,2:1
1 x Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS
1 x Legs + electric brakes for Viper Jet 1700 mm
1 x Legs + electric brakes for Viper Jet 90
1 x 160 mm carbon undercarriage (2pcs)
1 x Nose leg 155 mm with wheels 70 mm
1 x Fiberglass landing gear for 140-160
1 x White aluminium 230 mm landing gear
1 x 120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x Propeller hub spacer 8/5.5
1 x CC 01
1 x Landing gear axle 4x21 4 mm (2 uds)
1 x Canopy Latch
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Conector JAPAN G2 Set 5 pares
1 x Adjustable brass horn threaded M3
1 x 6 mm aluminium horn with patella
1 x Horn 5/20 with M2 Bearing
1 x Brass control horn M3 short for wire (2 pcs)
1 x 3 mm Prop Adapter M6
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x Extension silicon 30 cm male (Futaba)
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 30 cm female (Futaba)
1 x Futaba Female 40 cm extension
1 x Extension silicon 30 cm male (Graupner)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Extension silicon 100 cm (Futaba)
1 x Extension 100 cm (Futaba)
1 x Futaba male 40 cm extension
1 x Premium servo extension 75cm
1 x Extension silicon 35 cm male (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension silicon 100 cm (Graupner)
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x Extension 90 cm (Futaba)
1 x Landing gear axle Ø 5 mm (2 uds)
1 x CM-3
5,691.64EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies