1 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | Lock washer 2.7 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | Flat washer 2.2 mm (20 pcs) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | Ballast 700gr OPALE |
3 x | MAX pilot ARTF |
2 x | Paramotor BackPack XXS (without accessories) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Paramotor BackPack XXS 2 |
3 x | Paramotor Kit Camo H1.5/ Ben Red |
2 x | DYNAMOMETER S-1580 |
1 x | Optical RPM Sensor |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
2 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Copier 5x20 cm pcs |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | LOWER TOW HOOK |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Strip 2,0x2,0x330 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Actuador lineal HLS12-100210-7.4v |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Socket Head Screw M2x10 |
1 x | Aluminium wide washer M3 blue (4 pcs) |
2 x | Socket Screw M3x9 mm |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Opale Rucksack |
1 x | Lock nut M5 (10 pcs) |
1 x | Aramid 50 daN 50 m |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Lock nut M2 (20 pcs) |
2 x | Pan head screw M2x16 PH |
2 x | Hexagonal Nut M1 (10 pcs) |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Nut for mounting M6 (4 pcs) |
2 x | Parachute PV6 for F3J |
2 x | Lock washer 4.3 mm (20 pcs) |
3 x | Screw M3x5 (10 pcs) |
2 x | Parachute BACKUP X100 |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Windsock Ozone L -1200 mm |
2 x | Rescue 1,8m2 / BackPack |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Lock nut M4 (10 pcs) |
2 x | Nut for mounting M3 (4 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Pan Head Screw M2x8 PH |
1 x | Lock nut M3 (10 pcs) |
1 x | Nylon Screw M5x30 |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Parachute P4 |
1 x | Pan Head Screw M2x8 PH countersunk head |
2 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Fox 4000 mm (Airwold) |
1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
2 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | 3 mm Prop Adapter M6 |
1 x | 10 mm Prop Adapter M12 |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 3.2 mm Prop Adapter M8 |
1 x | 10 mm floating pad (72 pcs) |
2 x | Screw M4x20 (10 pcs) |
1 x | Screw M3x30 (10 pcs) |
1 x | Screw KB 1.4x6 mm (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Socket Head Screw M2x8 |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | LA500 pre-rotation gear |
1 x | Rotorshape Autogyro |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Fox 4000 mm Airworld,cabina |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Motor wall |
1 x | Head lower part New |
1 x | Washer 2.2×4 |
1 x | Fox MDM 1 4000 mm Std. |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | AXI 2808/20 V2 Long |
1 x | AXI 2814/12 V2 Long |
1 x | AXI 2814/12 V2 |
1 x | Axle for AXI 2217/xx motors |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Lock nut M5 (20 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Windsock Ozone L - 700 mm |
1 x | Nut for mounting M4 (4 pcs) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (female) |
1 x | 11x7 tree blades propeller |
1 x | Round flex hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Screw M4x30 (10 pcs) |
1 x | Wheel keeper washer |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | Cierva C30 spanish decoration Stickers |
1 x | LA500 pre-rotation gear hub |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | LA500 nose |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | FOX MDM-1 3.500 mm ARF White |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | LA500 Blades |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Battery plate |
1 x | Pilot LA 500 |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | Head spacer |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | LA500 tail empennage |
1 x | Gobe R-26S (Airwold) |
1 x | Balls 4 mm |
1 x | ASH 31 Mi Scale:1/3 - 7m |
1 x | Ball joint long |
1 x | Bearing housing |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | Head core bushing |
1 x | Autogyro Cierva C30 Spain |
1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | VTX 477 Carbon Rotorblade |
1 x | Propeller CFK 14x7 |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 16x13 |
1 x | AXI 2814/10 V2 |
1 x | AXI 2204 Multicopter |
1 x | 3 LiPo XH>EH adapter |
1 x | AXI 2808/16 V2 Long |
1 x | AXI 2820/12 CYCLONE |
1 x | Bearing ZZ 6x16x5 for AXI 5330/xx |
1 x | Axle for AXI 4120/xx motors |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | 2,3 mm Prop Drive Günther M4 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Adapter 5,0 mm M8 |
1 x | Axle for AXI 2808/xx motors |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Robart Door Hinge (Pk2) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
|
39,327.91EUR |