50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cable grommet Ø 4 mm (4 uds)
1 x 90 mm rods + T patellas set for direction control
1 x Aluminun wheel collar 4 mm Ø (4 uds)
2 x Cockpit aluminium closing
1 x 140 mm rods + T patellas set for direction control
1 x Clip mini fixing for wing (2 pcs)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x 28x5 mm wires output (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x 45 mm rods + T patellas set for direction control
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Cable grommet Ø 6.4 mm (4 uds)
2 x Cabin latch Fox MDM1 4m (pair)
1 x Cable grommet Ø 5 mm (4 uds)
3 x Allen wheel collar M3x3
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x 41x5,5 mm wires output (2 pcs)
1 x 100 mm rods set for direction control
2 x Canopy Latch
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Clip fixing for wing (2 pcs)
2 x Allen wheel collar M4x4
1 x 11 mm Rubber pads (14 pcs)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x 250 mm / 16 mm Airbrakes
1 x Cable grommet 9.5 mm (4 uds)
1 x 80 mm rods set for direction control
1 x Allen wheel collar M3x5
1 x SUS wire 3m (nylon coated)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Screw-lock connector M2 (2 uds)
1 x Covered closure or fairings
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Locking cable tie 4.6x203 (uds)
1 x Steering arm 16 mm Ø 4 mm
1 x Stainless steel cable Ø 1.3 mm (10 m)
2 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x Steering arm 12 mm Ø 4 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Spannlack 1000 ml
1 x Nitroverdu 500 ml
1 x Paint gun for sprays
1 x Partall paste 650 g
1 x Painting GHT Lexan Black 150 ml
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Plasti Dip Liquid Tape 429 ml black
3 x Hobbylite Filler, Balsa colour
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Pushrod octagone 3/2
1 x Landing gear frontal support 29x26x13,5
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x 20 g tin paste
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Universal Colour Paste deep black 50 g
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Locking cable tie 2.5x100 (uds)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Recessed MPX connector support (6 pcs)
1 x XH male balance (5S) connector (2 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Conector Servo female 4 pines
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 4 mm (M/F)
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Connector CAN 15
1 x YAK-23 "FLORA" (RBC Kits)
1 x Skyray (RBC Kits)
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x MIG 29 3D RTF Red Start SET + Gyro
1 x Actuador lineal HLS12-100210-7.4v
1 x FIALA Propeller 19x12 Electric
1 x Propeller FIALA 15x8 3-Blade
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x 
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Trailing leg 131 mm
1 x Hose connector stopper 4 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x DUPLEX 2.4EX MT 300 EX
1 x Split M1,2x10 (10 pcs)
1 x Wheel collar 4 mm Ø (4 uds)
3,539.58EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies