195.53EUR

Aramid fibre shears Proton®, 21 cm / 8" length
[R3651102]


Aramid fibre shears Proton®, 21 cm / 8\" length
Specially lined for the heaviest-duty applications – an innovation for even better results when cutting high-performance fibres of glass, aramid and carbon.

High-grade hardened blades
Fine hand cut leaves
One blade micro-serrated
Made of C60 carbon steel
Two straight, pointed blades
Extra-large "oblong" eye
Thanks to a very favorable center of rotation these shears have very good leverage when cutting and an unusually high cutting efficiency right down into the tips. Both blades are not only connected with a simple screw, but with a high-precision axis that is running on one side in a large-area bearing, and on the other side, it`s lined with a crown nut.
The bluish-black lining provides effective protection against abrasive wearing and presents an extremely resistant surface on the cutting edges whose hardness is about 2800 HV. The friction generated by cutting constantly causes the ceramic oxide layer to re-form.
Up to 4 times higher service life at aramid fibres compared to other shears.
We would recommend that you use individual models when handling aramid (as well as other synthetic fibres e.g. Dyneema®, Innegra™, Zylon® und Vectran®). Their cutting edges are exposed to other criteria than are those for use with carbon and glass fibre reinforcements. This will increase their cutting performance enormously
This lining is highly resistant and withstands attack from both UV radiation and human perspiration. Owing to the considerably reduced coefficient of sliding friction, the Proton® shears cut easily and smoothly.
The lining is chemically inert, meaning that surfaces with this lining exhibit far lower adhesive properties than surfaces without – a considerable advantage for practical applications with wet laminates.
The Proton® shears can also be reground through R&G.
Total length: 8" (21 cm)
Cutting length: 3.3" (8.5 cm)
Weight: 6.35 oz (180 g)
Please avoid resin residues curing on the scissors. Clean the scissors carefully with acetone immediately after use.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x 90x75 mm standart servo cover
1 x Servo TOPMODEL STANDARD S3217
2 x Servo TOPMODEL DS1413 T
1 x 58 mm micro servo cover
1 x Servo TOPMODEL DS9010 T
1 x 50x45 mm micro-mini servo cover
1 x 57 mm micro-mini servo cover
2 x 65 mm mini servo cover
1 x 13 mm wing servo holder
1 x 90x60 mm standart servo cover
1 x 11 mm wing servo holder
1 x 18 mm wing servo holder
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
2 x Cross Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x ABS angle 10,0x10,0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x 55% silver electrodes (2 pcs)
2 x Fresa corte diamante Ø 1.0mm (bola)
1 x Fresa corte diamante Ø 2.35mm (flame)
2 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x 
2 x Digital weight, angle and balance meter BASIC
1 x 
1 x 2,5x60 mm allen screwdriver
2 x Dust collector for mould cleaning
1 x Crimping tool
1 x Digital precision scale up to 2000 g
1 x Copier 5x20 cm pcs
1 x 
1 x Digital scale up to 40 kg
1 x Concave-Convex sandpaper file 13 mm
1 x Dremel 3000 130W
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Dremel PERMAGRIT thin lime
1 x 1,5x50 mm allen screwdriver
2 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Dremel PERMAGRIT 18 mm round lime
1 x EC-Cutter
1 x Crimping tool
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Joint with bearing M2 22x5,5
1 x Rudder 2_Tray 4.5~5 inch
1 x Long pinned hinge (12 uds)
1 x Interface Jack Adapter IKARUS
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x ABS angle 6,0x6,0x1000 mm
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x ABS angle 2,0x2,0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
2 x LUCAS pilot ARTF
2 x MAX pilot ARTF
2 x Parachute PV6 for F3J
2 x Set cintas unión paracaídas 145 cm
1 x Screwdriver for Hexagon 1,5mm
1 x Screwdriver for Torx® TX6
1 x Starter Sullivan-STAR 603 DINATRON
1 x Spare round blades, 28 mm, pack/ 2 pcs.
1 x Hot Glue Stick GREEN
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Copier 2x20 cm pcs
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Laminating brush 10 mm, pack/ 50 pcs
1 x Smart Soldering Iron 110W/230V AC
1 x Hot Glue Stick RED
1 x Precision wrench L100 mm
1 x Jeti Black cap
1 x Propeller diller 5/6,3/8/9
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Servo GO-09 9g
1 x Propeller RF CFK 16x8,5 S
2 x Paramotor Trike XL
1 x Windsock Ozone L -1200 mm
2 x Rescue 1,8m2 / BackPack
1 x Trike XL motor set (motor+esc+prop)
1 x 3,0x60 mm allen screwdriver
1 x 2,0x50 mm allen screwdriver
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo GO-12S70MG 20.5kg.cm 0.06s/60º
1 x Propeller CFK 16x16 Wide
1 x Propeller RF CFK 14.5x14
1 x Propeller CFK 18,5x12
1 x Propeller CFK 15x13
1 x Propeller CFK 18x17
1 x Parachute P4
1 x Wing OXY 5,0 m2
1 x Windsock Ozone L - 700 mm
1 x Parachute BACKUP X100
1 x Wing OXY 0,5 pulgadas2
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Opale Rucksack
1 x Aramid 50 daN 50 m
1 x Paramotor BackPack XXS 2
1 x Para-RC Mix
1 x Universal Filter
1 x Propeller APC 11x5.5 Electric
1 x Propeller APC 12x4.5 MR Electric Pusher
1 x Propeller APC 11x5 Glow/Gas
1 x Sandpaper file 13 mm
8,052.92EUR
Manufacturers
Languages
Español English
Currencies