Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1101001

48.74EUR

Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
[R1101001]

Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg

Low viscosity, free of solvents and fillers for impregnating glass, aramid, and carbon fibres.

Approved for the construction and repair of gliders and powered aircraft.
Laminate structures for vehicle construction in combination with hardener 285 are approved by the TÜV-Süd (Document available in german language only).

Mixing ratio:
100 : 40 parts by weight of epoxy : hardener
100 : 50 parts by volume of epoxy : hardener

Processing time: 50 minutes

Curing time: 24 hours at room temperature, followed by hot curing for 15 hours at 55 °C (recommended).

under request

Reviews

Customers who bought this product also purchased

DUPLEX R10 receiver 2,4GHz under request	Thermoforming sheet 0.5mm (0.02in) DIN A4 under request	Cotton Flocks, bag/ 500 g under request
Peel ply 100 g/m² (plain weave) 50 cm x 2m under request	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAVAGE Max Red 1080 mm
129.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Field folding model stand SebArt
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	WingFix ULTRA Black Edition
1 x	Propeller balancer
1 x	Propeller balancer
1 x	Angle of incidence meter
1 x	Medidor ángulos y/o incidencias
1 x	Field folding model stand
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	ORACOVER transparent Yellow (10 m)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Angled clevis with threaded rod M3
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	XH female balance (2S) connector (2 pcs)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	Support FUEL DOT V3
1 x	ALU servo arm 90º 3 mm shaft
1 x	57 mm micro-mini servo cover
1 x	Futaba 30 mm servo rounded arm
1 x	Servo HS-5565MH High Voltage
1 x	Alu servo arm double RHINO
2 x	Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Gear for D 200 BX
1 x	Hitec 30 mm servo rounded arm
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	Red aluminium servo arm V1-Futaba 17 mm M2
2 x	Servo RHINO pro SHV digi 4
2 x	Savox Brushless Servo SC-1251 MG
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	Red aluminium servo arm V2-Futaba 1,25" inch M3
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
2 x	UHU hart 35 g
1 x	Futaba 2x20 mm servo double arm
1 x	Servoarm Aluminium SH-82
2 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
2 x	Servo HITEC D-955 TW Titanium
1 x	Servoarm SH-81, two sides, aluminium
1 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
2 x	Servo HITEC D145 SW
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	Cotton Flocks, bag/ 7 Kg
1 x	SERVO DES 707 BB MG, Pignons
1 x	Servo HBS 690BB HV Digital
1 x	Switch moment button, 2 functions, long FUTABA
1 x	Futaba Aero Large Case - Internal Foam
1 x	Battery FUTABA 18MZ
1 x	TX-Tray V1 (L) (Red)
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Receiver bed (Blue)
1 x	Switch Cap L (Red)
1 x	SWTU2 switch
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	Servo MKS HV 777A+
1 x	Servo SAVOX SW-1250 MG digi
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
2 x	Servo TT ACE SHV 1504 MG
1 x	Servo HITEC HS-325 BB
1 x	Servo HITEC HS-5475 HB Digi
1 x	Blue aluminium double servo arm V3-Hitec 3,5inch
1 x	Servo HITEC D954 TW
1 x	Servo HITEC HS-485 HB
1 x	Pegamento Pu R 50g polyuretano
1 x	Propeller Pleg CAM Carbon 15x8
1 x	Servo MKS HBL599 SL
1 x	Servo Metal Horn 15.5 mm MKS
1 x	SAVOX SH 1290 MG servo digi
1 x	Servo MKS HV1220
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x	Servo BLS-M55B 61.2kg
1 x	Servo HITEC HS-5485 HB Digi
1 x	Servo HITEC HS-5087 MH
1 x	Servo HITEC D951 TW
1 x	Servo HITEC HS-5245 MG Digi
1 x	Servo HITEC D941 TW
1 x	Servo HITEC HS-45 HB, servo box
1 x	Servo HITEC HS-56 BB
1 x	Servo HITEC HS-53
1 x	Servo lock HS-80/81/82/85 (2 pcs)
1 x	Servo HITEC HS-55
1 x	Servo HITEC HS-225 MG
1 x	Servo HS-5070 MH Hi Volt
1 x	Servo HITEC D131 MW nano
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	UHU Por 50ml/40g
1 x	Gear carbonite set HITEC HS-6965
1 x	Gear set HITEC HS-311/322/325BB
1 x	Servo HITEC HS-7955 TG Coreless Digi
1 x	Servo HITEC HS-5805 MG Digi
1 x	Servo HITEC HS-7954 SH Digital High
1 x	Servo HITEC HS-7115 TH
1 x	Servo HS-5765MH High Voltage
1 x	Gear set HITEC HS-55
1 x	Gear set HITEC HS-645MG/5645MG/5685MH
1 x	Gear set HITEC HS-56 HB
1 x	Servo HITEC HSB-9370TH
1 x	Servo HS-7980TH digi high voltage ultra torque
1 x	Servo HITEC HS-81
1 x	Servo HITEC HS-70 MG
1 x	Gear set HITEC HS-225
1 x	Servo HITEC HS-82 MG
1 x	Servo HITEC HSB-9380TH
1 x	Servo HITEC HS-65 HB

5,158.54EUR