119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Circlick securite
1 x UBEC 6A KAVAN
2 x CC 02
1 x CC 05
1 x APM2.6 Power module with 5.3V DC BEC
2 x Black copper lacquer wire Ø0,2 mm (5 m)
3 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x CM-3
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x 5 LiPo XH>EH adapter
1 x 4 LiPo XH>EH adapter
2 x Cabel charger transmitter GRAUPNER
2 x BEC 3A FOXY
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x 2 LiPo XH>EH adapter
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Connector Sub-D 2+5 Female
2 x 3 LiPo XH>EH adapter
1 x Connector CAN 15
2 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x 30 cm BEC cable (female)
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Ball link M3 (10 pcs)
2 x Joint with bearing M3 22x5,5
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Adapter lead MPX/EC3
1 x Socket head ball link M3 (2 uds)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
2 x Ball link M3 RPA's-UAV's
2 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Ball link M2 (10 pcs)
2 x M2,5 Diam metal ball link V3 (2 pcs)
2 x M2 5Diam black ball link V2 (2 pcs)
1 x DPSI Ampere battery backer
1 x Ball link M3 (10 pcs, flat ball)
2 x Socket head ball link M3 (2 uds)
1 x Short ball link M1.6 (6 uds)
1 x Cabling for Fox MDM1 wings
2 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Connector Sub-D 2+5 Male
1 x CC 03
1 x 6 mm ball link M3 (10 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Adapter lead MPX/XT60
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x Dean "T" - Futaba Adapter
1 x Blue metalic ball link M2/2 azul (2 pcs)
2 x M3 Maxi ball link (2 uds)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Long ball link M3 (6 uds)
2 x M3/5Diam metal ball link V3 (2 pcs)
1 x Double conector with JR adapter and 200 mm extension
1 x CC 01
1 x 30 cm BEC cable (male)
1 x SERVO HOLDER
1 x LOWER TOW HOOK
1 x Towing hook
2 x Round Rod 1,0x1000 mm
2 x Strip 2,0x2,0x330 mm
1 x Strip ABS 2.0x5.0x1000 mm
2 x Round Rod 6,0x1000 mm
2 x ABS Strip 1.0x5.0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
2 x Round Rod 2,0x1000 mm
1 x 
1 x Hovercraft sailcloth
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x TrainerCord (master-learner)
2 x Multi-adapter balancer JST - TP
1 x PowerBox SparkSwitch RS
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x BALSA trip 3.0x3.0x1000 mm
1 x 3l Smoke oil
1 x Blue smoke canister 100 g
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x Pins M connect Multipin connectors AWG 20-24
1 x Aro pasacable Ø20 mm (4 pcs)
1 x ABS tube 2.0x1.0x1000 mm
3 x PSC 5
2 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x Long ball link M2 (6 uds)
1 x Joint with bearing M2 22x5,5
1 x M3 Maxi ball link (2 uds)
1 x TP/TopFuel - XH 2/3S Adapter
1 x Switching module high voltage SXH
2 x PSC 6
1 x Multi-adapter balancer JST/C - TP
2 x MAX BEC 2D plus EX
1 x SWTU2 switch
1 x Female connector for 6 pines AWG
1 x SPARK Switch 12v
2 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Round Rod 4,0x1000 mm
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Tarjeta programadora RAY G2
1 x Round Rod 2,5x1000 mm
1 x USBCOM 5i
1 x CC 11 Conector
1 x ABS Strip 1.0x2.0x1000 mm
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Propeller diller for EME35 and DLE35
1 x Propeller FIALA 15x8 3-Blade
1 x BULLIT Wing 1095 mm
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x Long ball link M1.6 (6 uds)
1 x Short ball link M3 (6 uds)
1 x Short ball link M2 (6 uds)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Socket head long ball link M3 (6 uds)
1 x DPS Switch JR/JR
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x USB HLS prog. interface
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Male connector for 16 pines AWG
1 x MAX BEC
1 x Magnetic Interruptor MULTIPLEX
1 x BOOMERANG II 40/46 ARF 1.55mm
1 x Xoar Electric Beechwood Prop 24x8
1 x Xoar Electric Beechwood Prop 22x10
1 x Xoar Electric Beechwood Prop 12x6
1 x SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
4,005.09EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies