1,349.00EUR

DJI FPV Combo
[DJIFPVCOMBO]


DJI FPV Drone Combo

Contenido del Packete
1 X DJI FPV Racing Drone
1 X DJI Control Remoto
1 X DJI FPV Goggles V2
8 X Hélices (4XCW 4XCCW)

DJI FPV: The road to amazing adventures in FPV flying is now open, for everyone.
Discover the true meaning of flying, taking to the skies with power, speed and... complete control.
Creating incredible FPV images has never been so accessible.

The most immersive flying experience
With First Person View (FPV) through DJI Goggles V2, you'll experience flying on a different level. You see in Real-Time where you are flying to.

FPV for EVERYONE: 3 different modes
Whether you're a seasoned FPV expert or a complete beginner, 3 different flight modes make the drone suitable for everyone and you'll fly with confidence right from the start.
S Mode: Dynamic mix between the freedom & speed of an FPV drone with simplified controls like familiar DJI drones.
N Mode: Ideal for the (absolute) beginner. Feels like a regular DJI drone.
M Mode: Go all the way, with no limits. The full FPV experience with adjustable parameters. Accelerate faster than sports cars and go from 0-100 in 2s and tear past at up to 140kph.
Videos with cinematic quality & smoothness
Video quality: up to 4K at 60 frames per second. Super Wide View Angle of up to 150°.
120 Mbps bit rate. 1080p up to 120 FPS.
RockSteady Stabilization: EIS technology for extremely stable images, no matter how aggressively you fly.
Images in up to 3840x2160
The world through the DJI Goggles with DJI OcuSync 3.0 video transmission.
The DJI Goggles (glasses) through which you see the live view, receives real-time images at 810p and 120fps, with a high bit rate of 50Mbps. Images are transmitted to the goggles within 28 milliseconds (ms), up to a maximum distance of 10KM!
Small mistake? A moment of panic? No need to panic. The Emergancy Brake and Hover button is your wingman.
With one push of the button, the DJI FPV brakes and hovers in place. No matter which controller or flight mode you use, this button is always available.
Advanced safety features
Rest assured, with Smart Return To Home you can put the drone back down where it took off at the push of a button, fully automatically. (Also Low Battery RTH). Forward and downward sensors detect obstacles, and a downward facing light and colour-adjustable LEDs on the arms keep your drone visible in all conditions.
DJI Motion Control: the new way to control your aircraft
With the optional DJI Motion Control, you can control this drone with simple hand movements, in a natural way. This is not only super innovative, but simply a whole new way of flying. The standard controller enjoys a dynamic design, specially created for FPV.
Easily replaceable parts
Up to 20-min battery life
DJI Fly App
Aerobertics.be is official DJI dealer. The best support & service guaranteed. For all your questions, feel free to contact us or visit our 800m² shop in Bruges, with DJI Showroom or order now in our convenient webshop.
FEATURES
Drone:
Take Off Weight: ca. 795g
Dimensions: 255×312×127 mm (with propellers) / 178×232×127 mm (without propellers)
Diagonal Distance: 245 mm
Max Wind Resistance: 39-49kph

Goggles:
Weight: 420g all included
Dimensions: 184×122×110 mm (antennas excluded) / 202×126×110 mm
(antennas included)
Screen Size: 2-inches (×2)
Screen Refresh Rate: 144 Hz


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Vasa model Catapult
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x Gates hinge black 30x16 mm (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 25 mm reinforced hinge
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 15 mm reinforced hinge
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Flap hinge (6 pcs)
1 x Long pinned hinge (6 uds)
2 x Large flex hinge (12 uds)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Miniature brass strap hinge, 1 m
1 x XH female balance (3S) connector (2 pcs)
1 x Conector BEC male (10 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x 30 cm DEANS female connector
1 x Connectors DEANS (T)
2 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x XH female balance (2S) connector (2 pcs)
1 x Conector BEC female (10 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x Optotronix Aurora Plug
1 x 2 mm male connector (2 pcs) with safety connector
1 x 2 mm female connector (2 pcs) with safety connector
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Servo NARO Max Std
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.5 mm (10 m)
2 x Cap closure 33/23.5mm (2 uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Canopy Latch
1 x Screw-lock connector M2 (2 uds)
2 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Steering arm 12 mm Ø 4 mm
1 x SUS wire 3m (nylon coated)
1 x Spikes Band (5 m)
1 x Tape GFK 50 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x 
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x T-Motor U7-V2.0 Kv420
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Soporte grifo FESTO (2 pcs)
1 x TS832 to Gopro AV/Power Cable
1 x Angle support XT60 conector
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Long pinned hinge (12 uds)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Micro flex hinge (12 uds)
1 x Suction funnel for carburetor WALBRO 20-80cc (red)
1 x XH LiPo extension lead
1 x PowerFuel RX V2 Fuel Pump
1 x Ignition bed V2 Red color
1 x Xplorer1 anemometro
1 x Xplorer2 anemometro
1 x Reed valve for DA 50-R
1 x Protector Connector Dean-T (1 pair)
1 x 30 cm MULTIPLEX female connector
1 x MPX PCB "Gender-Changer (5 pcs)
1 x MPX Support
1 x MPX Support (2 pcs)
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Electric Fuel Pump 12V
1 x MR30 connector female
1 x DLE 55 carburetor
1 x Protector Connector MPX (1 pair)
1 x Compact on-board starting system (9724)
1 x Connectors MPX female (PIN double)
1 x MPX PCB "4 Pins", 5 pieces
1 x Propeller POWER-PROP 7x7
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors DEANS 4 pins (1 pair)
1 x Soporte carbono MR30 (2 pcs)
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Tailwheel for 40/90 size
1 x Servo HITEC D-955 TW Titanium
1 x Compact on-board starting system (9512)
1 x MPX screwable clips (5 pcs)
1 x GLOW 9C + accesories
1 x RCEXL Electronic ignition twin CM-6
1 x Contacto macho pin conector (10 pcs)
1 x Starter EM Gear Power 80
1 x Smoke pump RCEXL
1 x Connectors MPX black male
1 x Recess mount-rem. glow plug set
1 x Suction funnel for carburetor 90D-M (red)
1 x JM electric Pump
1 x PIN Connector female (100 pcs)
1 x Connectors MPX male
1 x Gold antispark 5,5 mm plug
1 x Landing gear frontal support 29x26x13,5
1 x 28x5 mm wires output (2 pcs)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Split M1,2x10 (10 pcs)
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x Pushrod octagone 4/3
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Cockpit aluminium closing 4.7g
1 x Pushrod octagone 3/2
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Snap long M2 (10 uds)
2 x Cable grommet Ø 4 mm (4 uds)
1 x 140 mm rods + T patellas set for direction control
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Tip wing protector 30x10 (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Wing bolts M6 Steel screw Red (2 pcs)
1 x MULTIPLEX - TUNING SPINNER (67MM) FOR MULTIPLEX FUNRACER
1 x Fundas para el transporte F3A alas
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x DJI Mavic Air Fly More Combo
1 x Spinner 42 mm EXTRA 330SC
1 x Spinner fixed propeller 42 mm / 5,0 mm
1 x Spinner fixed propeller 60 mm / 5,0 mm
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Ball Bearing Oil 25 ml
1 x ANGEL 48" pp red/blue/white
1 x Lipo KAVAN 5000 mAh 11.1v 40/80C
1 x ZEUS F3A 2m
1 x Servo KST MS825 V8.0 35kg 8.4v
2 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Bateria DJI Mini 2 2250 mAh
7,849.28EUR
Manufacturers
Manufacturer Info
DJI
Other products
Languages
Español English
Currencies