Top » Catalog » Hardware » Lights/Ilumination » UNILIGHT » UNSPOT12F0803WE

69.00EUR

3x8W Triple-Spotlight, 12mm, T-Fuse White
[UNSPOT12F0803WE]

3x8W Triple-Spotlight, 12mm, T-Fuse

How about a little more? These three small spotlights with very compact, CNC manufactured aluminium reflector (only 12mm diameter) provide optimum efficiency in the smallest of spaces. The spotlight is perfectly suitable for high-performance spotlights on small viperjets (~1,5m) and similar models; guaranteed to be visible at daylight for over a hundred meters. The wide beam angle coupled with an enormous performance make these spotlight a topmodel!

Direct operation with 3S LiPo (12V). Please ensure sufficient cooling air during operation. For the first time in model making, the spotlights are equipped with an integrated overtemperature protection. If the enclosure becomes too warm, the light will be safely switched off. Without any further cooling, do not operate such spotlights more than 3-5 minutes at a time. Otherwise, the protection will switch off the light or let it blink.

Technical data
Performance: 3x8W reference power
Overtemperature protection: switch-off and clocking of the light at 65-70°
Voltage: 3S/12V
Electricity: 0.7A
Beam angle: ~110°
Light intensity: 3x200 Lumen WHITE
Light intensity: 3x180 Lumen WARMWHITE
Dimension: D12x52mm, mounting hole D10mm
Weight: 21g (without cable)
Delivery: ready to use with 1m connection cable for 3S operation
Size comparison uniLIGHT system

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
    Emcotec
    JET CENTRAL
    Multiplex
    Night Fly
    OptoTronix
    Pichler
    PowerBox
    UNILIGHT
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Crimping tool
1 x	Crimping tool
2 x	Dust collector for mould cleaning
2 x	Starter EM Gear Power 80
2 x	3,0x60 mm allen screwdriver
1 x	Hot Glue Stick RED
1 x
2 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x	Z Bender - S Type Tool
2 x	Z Bender - S Type Tool
2 x	Screwdriver for Torx® TX6
2 x	Screwdriver for Torx® TX8
2 x	Copier 2x20 cm pcs
2 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x	Vacuum pump 12 CFM
1 x	2,0x50 mm allen screwdriver
2 x	Ball Link Plier
2 x	Starter Sullivan-STAR 601
1 x	Screwdriver for Hexagon 1,5mm
2 x	Starter Sullivan-STAR 603 DINATRON
2 x	Digital precision scale up to 2000 g
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
2 x	Disposable Injector Bags (30x16cm) 100 pcs
2 x	Hot Glue Stick GREEN
2 x	Digital scale up to 40 kg
2 x	Ball Link Plier
2 x	Starter 12v (Max 90 and 15ccm)
1 x	Hot Glue Stick BLACK
1 x	Conector MR-60 (pareja)
1 x	Extension MPX-MPX 20 cm
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
3 x	Straightened rod Ø 1.2 mm x 1500 mm
3 x	Straightened rod Ø 5.0 mm x 1000 mm
3 x	Straightened threaded rod M3 - 1m
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Round Rod 2,5x1000 mm
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
3 x	ABS Strip 1.5x4.0x1000 mm
1 x	CC 05
1 x	Round Rod 6,0x1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Round Rod 3,0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	CC 02
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	4 LiPo XH>EH adapter
1 x	USB HLS prog. interface
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	MPX-Dean "T" Adapter
1 x	CM-3
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x	Electric spoiler 250 mm (2 pcs)
1 x	DYNAMOMETER S-1580
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Cockpit plastic closing
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Locking cable tie 3.2x142 (uds)
1 x	SUS wire 3m (nylon coated)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	One touch canopy lock
1 x	Steering arm 16 mm Ø 4 mm
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Cinta Goldfix 1m
1 x	Blind nut M5 (10 pcs)
2 x	Long ball link M3 (6 uds)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	"S" set for boats
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Steel brush wheel with 2.35mm
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Dremel PERMAGRIT thin lime
1 x	Mini Infrared Thermomiter
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Refueling Cap V3 Black
1 x	Oracover GREY Seafire Sea 2m
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
3 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Split pin 1.6x16 mm (10 uds)
1 x	ABS I Strip 20x10x1000 mm
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Snap for floding prop for 2 mm axi
1 x	Cable grommet Ø 6.4 mm (4 uds)
2 x	Round Rod 1,5x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	SPARK Switch 5.9v
1 x	Strip 1,5x1,5x330 mm
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Control for forward wheel (MINI)
1 x	EWC3 100 cm wing connector
2 x	Strip 2,0x2,0x330 mm
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Three-position switched channel, short
1 x	140 mm rods + T patellas set for direction control
1 x	M3 Maxi ball link (2 uds)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Ball link M3 (6 uds)
1 x	Socket head long ball link M3 (2 uds)
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	M3/5 Diam metal short ball link V3 (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Short ball link M2 (6 uds)
1 x	Ball link M3 (10 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Release wax 250ml
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Female connector for 6 pines AWG
1 x	Hacker X-Pro USB interface V2
1 x	Connector CAN 15
1 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Cable grommet Ø 5 mm (4 uds)
1 x	Round Rod 2,0x1000 mm
1 x	DPS Switch JR/JR
1 x	Cockpit aluminium closing 4.7g
1 x	EWC3 40 cm wing connector
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Split M1,2x10 (10 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x	Prop Holder AXI 41xx V2
1 x	Motor Mega AC 16/15/04 COMBAT
1 x	Motor Mega AC 16/15/05 CE F5J
1 x	Motor Mega AC 16/15/07 COMBAT
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Motor Mega AC 16/25/02
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Starter EM Gear Power 250
1 x	Cut tube
1 x
1 x	Solvent Plasti Dip 1000 ml
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Program card KAVAN PRO
1 x	Motor MVVS 5.6/690 GLIDER
1 x	Propeller hub spacer 8/5.5
1 x	USB Adaptor OPTronics
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Wheel 115 mm with electromagnet and brake disk (2 uds)
2 x	JETImodel Addcap 1640
1 x	Female connector for 10 pines AWG
1 x	DUPLEX 2.4EX MU 3 Sensor
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Vacuum pump P1-N
1 x	Copier 5x20 cm pcs
1 x	1,5x50 mm allen screwdriver
1 x	Screwdriver for Hexagon 1,27mm
1 x	2,5x60 mm allen screwdriver

8,232.43EUR